Experiments were scheduled by orthogonal design method.
最后采用正交设计法安排实验。
Study the orthogonal design method of polyphase coded signals.
⒉研究了正交多相编码信号的设计方法；
Using orthogonal design method, the optimum reaction conditions were obtained.
通过正交实验得出最佳反应条件。
In order to optimize the structure parameters of the tower, the orthogonal design method is used.
为了优化塔架的结构参数，采用正交设计对其结构尺寸进行了优化。
The application of orthogonal design method in the research of the electric brush was introduced.
介绍了正交设计在电刷研制中的应用。
Furthermore, we determined the best environmental factors by single factor and orthogonal design method.
采用单因素和正交设计的方法，得到最佳的外界环境因素。
Using orthogonal design method, the immuno pharmacological effects of Buzhong Yiqi Decoction were studied.
采用正交设计法，对补中益气汤中药味的免疫药理效应进行析因研究。
By using the orthogonal design method, simulating with program FLAC, the optimized layout of coal pillar is given.
通过正交设计，利用FLAC软件模拟，给出煤柱稳定性最优的方案。
METHODS the orthogonal design method was used to optimize the formulation. Hydroxy propyl methyl cellulose was used as matrix.
方法采用正交设计以体外溶出为指标，以羟丙基甲基纤维素为阻滞剂，进行处方筛选。
METHODS The orthogonal design method was used to optimize coating material, coating weight, content of the porositymaking agent.
方法：采用正交设计以体外溶出为指标，对包衣材料种类、包衣剂用量、致孔剂用量进行处方筛选。
The purpose of this paper is to provide a discussion and comparison of SupportVector Machine (SVM) and the orthogonal design method.
论文对支持向量机（SVM）和正交设计方法进行了比较。
A method of optimization design about self cooling enclosure continuous isolated phase bus with orthogonal design method is introduced.
介绍了利用正交设计法进行自冷全连式离相封闭母线优化设计的方法。
Using orthogonal design method, adopting L9 34 table, to research the synthesis of N-acetyl-L-leucine, for improving the productive rate.
采用正交设计法，选择L9（34）表，研究N-乙酰-L-亮氨酸的合成，提高反应得率。
The finite element analysis method was used to analyze the static electric field with the orthogonal design method to optimize the transducer.
采用三维有限元方法和正交试验设计方法相结合对传感器结构进行了优化设计。
Using Orthogonal Design Method to optimize the preparation technique by using encapsulation rate, particle size and shape as evaluating index.
以微囊包封率、粒径和形态为评价指标，通过正交设计确定克拉霉素微囊的最佳制备工艺。
The influence of laser transmission welding parameters for polypropylene (PP) plastics on welding quality is investigated by orthogonal design method.
利用正交实验方法，研究了聚丙烯(PP)塑料的激光透射焊接工艺参数对焊接质量的影响。
With orthogonal design method, the prevention experiment was done by using the mixture combining 40% oxidizing dimethoate and 20% insect killing oil slick.
应用正交设计方法，采用40%氧化乐果加打蚧20%浮油制成混合剂进行防治试验。
From the side of genetic toxicology, Using orthogonal design method, we studied the joint effect of benzene, Toluene and xylene on the mice small bowel micronucleus.
采用正交设计从遗传毒理学效应角度探讨了有机化合物苯、甲苯、二甲苯对小鼠骨髓细胞微核联合毒作用之间的关系。
The experiment of iron ores pelletizing by adding these two types of bentonites with different mixture ratios is carried out according to the orthogonal design method.
采用正交设计方法，进行了膨润土种类及配比的铁矿成球实验。
Purpose:To take paeoniflorin ingredient in Red peony root as index and optimize the Extraction Technology of Chishao(Red Peony Root)Tablet by orthogonal design method.
目的：本文以赤芍片中芍药苷的成分为指标，用正交设计方法优化了提取工艺的研究。
In Present paper, the composite activation and optimization of components of fly ash produced by Huaneng Electical Plant has been studied with orthogonal design method.
本文介绍利用复合激活和组份优化技术改性华能上安电厂二级粉煤灰的情况，采用正交设计方法对试验方案进行配方优选。
This paper dealt with the relationship between hot pressing parameters and mechanical properties (MOR MOE and IB) of bamboo particle board by the orthogonal design method.
利用正交试验法研究了竹材刨花板热压曲线中各因素与板材的静曲强度、弹性模量及平面抗拉强度间的关系。
Secondly, with the orthogonal design method and single-factor-experiment, the technics of synthesizing Hydroxyl-terminated copolymer of CHO -thf have been studied in this paper.
其次，本文用正交实验设计和单因素寻优等有关实验方法对端羟基环氧环己烷-四氢呋喃共聚醚的合成工艺进行了研究。
The concrete strength test was conducted with the concrete made of fly ash, cement and sand plus a certain high efficient water reduction agent FDN and the orthogonal design method.
采用粉煤灰、水泥、砂石，掺加一定量的高效减水剂FDN，利用正交设计方法安排试验。
According to the factors of influencing the force of disassembly, the last chapter arranges the experiments about disassembling Through Hole Device with the Orthogonal Design Method.
根据影响拆除力的因素，用正交试验设计方法，安排拆卸插装元器件的实验。
In this paper, the orthogonal design method is used to find out the primary and secondary factors that affect the bearing capacity of beam-to-column connections in steel moment frames.
本文通过在钢框架梁柱腹板连接承载力影响因素分析中引入正交设计方法，找出了主要因素和次要因素。
Firstly, with the orthogonal design method and single-factor-experiment, the technics of synthesizing Hydroxyl-terminated poly (l, 2-cyclohexene oxide) have been studied in this paper.
首先，本文借助正交实验设计和单因素寻优等有关实验方法对端羟基环氧环己烷均聚醚的合成工艺进行了研究。
Method Using the height of oil layer in the centrifuged emulsion as evaluating criterion, the main factors that affect the stability of emulsion were selected by orthogonal design method.
方法采用正交设计法，以所制乳剂离心分层油层的高度为考察指标，对影响乳剂稳定的主要因素进行优选。
Method Using the height of oil layer in the centrifuged emulsion as evaluating criterion, the main factors that affect the stability of emulsion were selected by orthogonal design method.
方法采用正交设计法，以所制乳剂离心分层油层的高度为考察指标，对影响乳剂稳定的主要因素进行优选。
应用推荐