Precipitated calcium carbonate is a good paper filler, the filler retention rate improve after modification.
轻质碳酸钙是良好的造纸填料，通过改性可有效提高其留着率。
The quality and character of PCC made from green liquor as well as its performance as paper filler were compared with that of commercial PCC and GCC in this paper.
分析对比了用绿液制轻钙与市售商品轻钙、重钙产品的质量特性，以及它们在造纸产品加填中的性能。
A thermal power plant waste (fly ash) was used as one kind of corrugated paper filler in order to reduce the environmental pollution caused by fly ash through its application in paper making.
将某火力发电厂废料粉煤灰作为一种瓦楞原纸填料，通过其在造纸中的应用来减少粉煤灰对环境的污染。
Students, faculty and staff members filled the bins with filler paper.
学生，教师和工作人员把箱子装满活页本用纸。
The surface modification has been studied on an filler of solid propellants in this paper, by using silane and titanate coupling agents.
本文采用硅烷类和钛酸酯类偶联剂对固体推进剂中的硝酸铵填料进行表面改性。
As filler, Calcium carbonate is extensively applied in rubber, plastics, printing ink, paper, food and electronics industry.
碳酸钙作为填料广泛应用于橡胶、塑料、油墨、造纸、食品以及电子工业等行业中。
This article introduces talc special properties and its applications in the filler of paper making, pitch absorbent and coating pigment.
介绍了滑石粉的特殊性质及其在造纸填料、功能性材料和涂布颜料方面的应用。
On the basic study of the pigment and filler function, the paper made use of the existing condition to prepare the crotal temperature-lowering coatings.
在对颜填料性能研究的基础上，利用实验室现有条件配制了有一定降温效果的红棕色降温涂料。
The effect of base resin, content of filler and coupling agent on thermalstability of non halogen flame retardant polyolefin composite were studied in this paper.
研究了树脂基体、填料含量和偶联剂对无卤阻燃聚烯烃复合材料体系热稳定性的影响。
Adopting bicomponent retention system greatly improved filler retention rates, thereby increasing the amount of filler to increase the content of filler in paper, lower pulp consumption and costs.
通过改用助留系统，大大提高填料留着率，从而提高纸张中填料的含量，降低浆耗和成本。
It is used as a filler in paper, leather, and linoleum.
它还被使用于一个填料在纸，皮革，油布。
The paper analyses the weldabilities of four kinds of dissimilar metals welding joints and also discusses the design of welding grooves, selection of filler metals and welding code.
本文分析了高压氨洗塔中四种复杂的异种钢接头的焊接性能，对接头坡口设计、焊材的选用、工艺规范的选取进行了深入的探讨。
The paper summarizes its applicability for the first time as a rubber filler.
本文首次总结了钙镁粉在橡胶填料中的应用可行性。
For the using different ratio of filler bitumen, different nominal maximum size of aggregate, different asphalt, the paper analyzed thoroughly the influence to AM, ap, then get some related rule.
论文针对不同粉胶比、不同最大公称粒径集料、使用不同沥青对Am、Ap值变化影响进行了研究，得出了相关规律。
The effect of filler on properties of ns resins is studied in this paper.
本文研究了填料对甲基丙烯酸树脂(NS)性能的影响，表明NS树脂具有较好的综合性能。
The formula of domestic EPDM 4045 compound for cable insulating material is introduced in this paper, After the selection of filler, vulcanization agent and plasticizer, the compound are determined.
研究国产乙丙橡胶EPDM 4045电缆料的配方，确定了填充剂、硫化剂、增塑剂等各组分的配比，简要阐述了胶料的加工工艺。
The paper sample analysis indicated that the process improved filler retention, paper ash content and opacity, and decreased white water consistency.
检测纸样结果表明：该工艺提高了填料留着率、成纸灰分、不透明度、降低了白水浓度。
This paper deals with the foaming of Linear Low Density polyethylene (LLDPE) with filler.
本文介绍了用线型低密度聚乙烯(LLDPE)进行填充发泡的试验结果。
The paper studies the electric conductivity of electric silicon rubber using acetylene carbon black, electric stove black, etc as a filler.
本文对乙炔炭黑、导电炉黑等作为填料的导电硅橡胶的导电性进行了研究。
This paper shows the study on the enhanced biodegradation of LAS on filler with mature bio-membrane so as to increase capability of LAS degradation of biological contact oxidation system.
本文主要研究在生长有成熟生物膜的填料上强化LAS生物降解作用，提高生物接触氧化系统的LAS降解能力。
In this paper, composite spinning of hollow fiber and grafting on the surface of hollow filler was instructed.
本文就复合中空纤维膜的纺制工艺和中空纤维膜表面接枝改性工作作了简单介绍。
This paper studies chiefly the basic properties of the composite of un-saturated polyester resin in which wollastonite powder is used as a filler.
本文研究了硅灰石填充不饱和聚酯树脂体系的一些基本性能，进而研究了模塑料的配方和性能并压制了绝缘制品。
In this paper, TIG welding is used to join aluminum matrix composite and the influence of Ti filler on the comprehensive properties of weld is discussed.
采用TIG焊方法焊接铝基复合材料，讨论了填充材料钛对焊缝综合性能的影响及填充材料的厚度与焊缝中生成物之间的关系。
It is tried to be explored as filler in papermaking in this paper, the results showed diatomite was suited for light printing paper.
本文探索性地研究了硅藻土作为造纸填料的使用性能，发现其适合作为轻质印刷纸的填料来使用。
The raw material, synthetic process, performance and application of the seam filler are introduced in this paper.
本文介绍了这种嵌缝材料的原材料，合成工艺、性能及施工工艺等。
The paper presents the structure principle of anaerobic upflow filler. and makes a summary for its technical DE sign and design parameter.
介绍上流式厌氧滤池的结构原理，并对上流式厌氧滤池工艺设计方法和设计参数进行总结。
The encapsulate composite for pulsed piezoelectric power supplier was investigated in this paper, in which a bisphenol A liquid epoxy EP828/E51 was resin matrix and aluminum oxide was filler.
本论文研究的复合封装材料以双酚A型环氧树脂EP828／E51作为基体，以氧化铝作为填充材料，有望替代纯环氧固化物作为脉冲压电电源用新型封装材料。
Research advances in carbon nanotubes sensing in polymer composites are reviewed: carbon nanotubes filler, carbon nanotubes coated fiber, carbon nanotubes yarn and carbon nanotubes paper.
综述聚合物基复合材料中碳纳米管传感的最新进展：碳纳米管与树脂共混、碳纳米管涂层纤维、碳纳米线和碳纳米纸。
Research advances in carbon nanotubes sensing in polymer composites are reviewed: carbon nanotubes filler, carbon nanotubes coated fiber, carbon nanotubes yarn and carbon nanotubes paper.
综述聚合物基复合材料中碳纳米管传感的最新进展：碳纳米管与树脂共混、碳纳米管涂层纤维、碳纳米线和碳纳米纸。
应用推荐