First stage product quality planning of diesel engine piston ring.
负责柴油机新产品质量先期策划。
It has the practical usage to develop new material for piston ring.
在新材质活塞环的研制过程中具有一定的实用价值。
Nowadays, the piston ring seal is really what the break in process is all about.
如今,磨合就是在磨合活塞密封环。
Bring forward a new method of whole numeric control processing of the piston ring.
提出了一种新型活塞环全数控加工机床结构方案。
The influence of sand & dust and low pressure on dynamics of piston ring was studied.
研究了西部低气压及沙尘环境对于活塞环动力学的影响。
Establish and perfect the gasoline engine piston ring design specifications and process.
负责建立并完善公司柴油机产品设计规范和流程。
Various dimension guiding piston ring , steering belt , slide way are soft belt and so on.
各种尺寸的导向活塞环、导向带、导轨软带等等。
The twist angle of L shape piston ring directly influences the performance of diesel engine.
形活塞环的扭角对柴油机的性能有着显著的影响。
A simple testing method of wear resistance for piston ring and cylinder sleeve is introduced.
本文介绍一种简易的活塞环与气缸套磨损试验方法。
The laser heat treatment process and mechanism on the surface of piston ring groove were studied.
对活塞环槽表面的激光热处理工艺与机理进行了试验研究。
Labyrinth seal and piston ring provide a dual sealing system, keeping oil clean and reducing wear.
曲径汽封和活塞环提供了双密封系统,使油保持洁净并减少磨损。
Wenzhou Weite Automotive Fittings Co. , Ltd. is an enterprise mainly manufacturing Piston Ring series.
温州威特汽车配件有限公司是一家主要生产汽车活塞环系列的企业。
In the automobile industry piston ring tin and cylinder walls tin can prevent sluggish death and injury.
在汽车工业上活塞环镀锡和汽缸壁镀锡可防止滞死和拉伤。
Adopting spring load device for continuing to load, find the ultimate load that the piston ring be endured.
为了能对活塞环进行连续加载,采用弹簧加载装置,从中找出活塞环所能承受的极限载荷。
By analysis of piston ring, this paper describes important effects of piston ring on oil consumption control.
通过对活塞环的分析,说明活塞环在机油耗控制方面所起的重要作用。
A research was made on the structure of piston ring and elastic force ring in oilless lubrication compressors.
对全无油压缩机上活塞环弹力环结构进行了研究。
The width of the piston ring and adoption of the number of rings in the form of orientation and other factors.
活塞的宽度与采用密封圈的数量、导向环的形式等因素有关。
This series of products are applied in automobile, bearing, piston ring, compressor and auto-fitting industries.
本系列产品,服务于汽车、轴承、活塞环、压缩机、汽配行业。
Such as whether the bolt is tightened, the piston ring is installed correctly, damaged oil seal is replaced, etc.
譬如螺栓是否拧紧,活塞环安装是否正确,损坏油封是否更换等。
Meanwhile, it causes engine overheat, blockage piston (ring) in the cylinder, melting to wear and damage piston ring.
同时,也会造成内燃机过热、活塞(环)卡缸、熔着磨损以及活塞环断裂等事故。
This paper analyses the patterns and reasons of piston ring wear and ineffectiveness and proposes some countermeasures.
本文对活塞环磨损失效的形式及原因进行了分析,并提出预防措施。
The design of integral non-backpressure piston rings was studied in order to reduce wear and to raise the piston ring life.
为了减少磨损,提高活塞环的使用寿命,对整体无背压活塞环的设计进行了研究。
The Statistical analysis of piston ring tracer cutting errors shows that there is a systematic error in the tracer cutting.
对活塞环仿形车削误差的统计分析表明:靠模仿形加工中存在系统误差。
Working experience in multi-national companies, candidates with 3 to 5 years quality experience in piston ring are preferred.
国际化公司工作背景,有3-5年质量工作经验,活塞环行业优先。
The structural characteristic and machining method of runner blade servomotor piston ring for large Kaplan turbine are studied.
对大型轴流转桨式水轮机转轮接力器活塞环的结构特点及加工方法进行了研究分析。
This kind of air compressor cylinder basically does not include any oil content in, the piston ring and packing is commonly ptfe.
这种空压机气缸中基本上不含油,其活塞环和填料一般为聚四氟乙烯。
Also, the radial deformation of cylinder liner and piston ring should be reduced to improve the lubrication performances of piston ring.
此外,为了提高活塞环润滑性能应尽量减少气缸套和活塞环的径向变形量。
Metal elastic force ring inside piston rings can add initial elastic force of the non-metallic piston ring to get expectative seal effect.
在活塞环的内侧设置金属的弹力环增加非金属活塞环的预弹力,可到达预期的密封效果。
Metal elastic force ring inside piston rings can add initial elastic force of the non-metallic piston ring to get expectative seal effect.
在活塞环的内侧设置金属的弹力环增加非金属活塞环的预弹力,可到达预期的密封效果。
应用推荐