These layers are applied by flame or plasma spraying.
这些层已采用火焰或等离子喷涂。
So coarse powder is more suitable for low power plasma spraying.
因此粗粉在适当功率下更适合低能等离子喷涂。
Thermal plasma spraying is one of the important technologies in modern surface engineering.
热等离子体喷涂技术是现代表面工程的重要手段之一。
The HA gradient coating on ti alloy substrate was developed using PVD and plasma spraying techniques.
采用先进的表面技术复合制备生物活性梯度涂层材料。
The basic experimental researches on rapid manufacturing moulds by plasma spraying have been carried out.
对等离子弧喷涂法快速制模技术进行了基础实验研究。
It also points out the matters needed to study, and exhibits the bright applied future of plasma spraying.
并提出需要研究的问题,展示了等离子喷涂更加广阔的应用前景。
A distributed control system is designed for plasma spraying, and the software and hardware are given out.
针对等离子喷涂设备设计出分布式控制系统,介绍了等离子喷涂分布控制系统的软、硬件结构。
The paper summarizes the characteristic, some application fields and composite process technology of plasma spraying.
综述了等离子喷涂的特点,以及涂层的一些应用领域及其复合处理技术。
Plasma spraying technology is widely used to modify the surface of biomedical materials, such as titanium and its alloys.
等离子喷涂是一种常用的生物医用材料表面改性技术,被广泛应用于钛等金属人工骨的表面改性。
A review is given on the research progress in nanostructured ceramic coatings prepared by plasma spraying at home and abroad.
等离子喷涂纳米陶瓷涂层是目前纳米涂层领域的研究热点之一。
The microstructure of zirconia coating deposited by plasma spraying technique was studied by means of FESEM, SEM, TEM and XRD.
利用透射电镜(TEM)、扫描电镜(sem)和X射线衍射仪(XRD)等分析技术,表征了等离子喷涂氧化锆涂层的显微结构。
Oxidation resistance coatings prepared by plasma spraying process on the surface of workpiece can improve oxidation resistance.
利用等离子喷涂技术在工件表面制备抗高温氧化涂层,能显著提高工件的抗氧化性能。
The micro-plasma spraying gun adopted unique passage and spraying nozzle structure and center axial to be sent the powder method.
设计的微弧等离子喷枪采用了独特的气路结构、喷嘴结构和中心轴向送粉方式;
The characteristics of phase transformation and microstructure of nano titanium oxide powders during plasma spraying were discussed.
作为对比,同时进行了氧化钛纳米粉体在烧结过程中相变及微结构变化的研究。
RESULTS AND CONCLUSION:The surface modification methods include plasma spraying, micro-arc oxidation, sol-gel and biomimetic methods.
结果与结论:在表面生物活性改性的方法中,主要有等离子体喷涂法、微弧氧化法、溶胶-凝胶法及生物仿生法等。
A distributed control system is designed for plasma spraying equipment and the configurations of system's software and hardware are discussed.
针对等离子喷涂设备设计出分布式控制系统,介绍了等离子喷涂分布控制系统的软、硬件结构。
It can be used to spray metallic, carbide and oxide powders. The supersonic plasma spraying gun has a single-anode, internal feeding structure.
单阳极内送粉结构的高效能超音速等离子喷枪,为国内外研究超音速等离子喷涂技术开创了一条新路。
The plasma spraying experiments were carried out using various argon-nitrogen volume mixture ratios, and the corresponding coatings were obtained.
采用了不同的氩氮体积混合比进行等离子喷涂实验 ,并获得相应条件下的涂层。
This updated report provides a timely guide to scientific literature published worldwide Its comprehensive coverage focuses on plasma spraying of ceramics.
这个最新报导对全世界已发表的科技文献提供了一个适时指南。它的广泛报导集中在陶瓷的等离子喷涂。
The influence of added charcoal pore-forming agent and improved plasma spraying parameters on porosity of the anode layer were investigated experimentally.
实验研究分析了添加炭粉造孔剂和改进喷涂工艺参数对阳极层孔隙率的影响。
The plasma spraying techniques, which have been widely used in many products design, is a new kind of technology for hardening and protecting parts surface.
等离子喷涂技术是零件表面强化与防护的新工艺,在许多产品的设计上得到了广泛的应用。
Self-lubricating wear resistant coating is prepared by plasma spraying using chromium carbide, nickel chrome, fluoride-metal, and silver composite materials.
采用碳化铬、镍铬合金、氟化物共晶体和银的复合粉末为原料,通过等离子体喷涂方法制备高温耐磨自润滑涂层。
The plasma spraying technique was used to prepare a set of thermal barrier coating specimens, and water-cooling method was used in thermal shock experiments.
用等离子喷涂方法在合金圆柱体上制备了热障涂层,并用水冷的方法进行了热冲击实验,试样的失效现象为轴向的开裂和剥落。
The properties of the composite powders obtained were determined and the plasma spraying experiments were carried out to examine the properties of coating layers.
测定了所获得复合粉末的性能,进行了等离子喷涂试验,检查了涂层的性能。
A plasma spraying welding robotic system using for repairing easily worn off parts assembled in dredge equipment on ship is developed to make the operation automated.
本系统应用等离子喷焊工艺对工程船舶设备中的易损零件进行修复。
A plasma spraying welding robotic system using for repairing easily worn off parts assembled in dredge equipment on ship is developed to make the operation automated.
本系统应用等离子喷焊工艺对工程船舶设备中的易损零件进行修复。
应用推荐