Rubber block with polyethylene film.
胶块用聚乙烯薄膜包封。
Polyethylene Film of 25Kgs Net Each.
牛皮纸袋内压聚乙烯膜包装，25公斤／包。
Packing Paper bag lined with polyethylene film. Net weight 25kg per bag.
包装复合纸袋，内衬塑料薄膜的复合纸袋，净重25公斤。
Packing Paper bag lined with polyethylene film . Net weight 20kg per bag.
包装内衬塑料薄膜的复合纸袋，净重20公斤。
Packing Paper bag lined with polyethylene film . Net weight 25kg per bag.
包装内衬塑料薄膜的复合纸袋，净重25公斤。
Packing Coextruded paper bags lined with polyethylene film bags. Net weight 20 kg per bag.
包装复合纸袋，内衬塑料薄膜袋，净重20公斤。
The grafting of acrylic acid onto a polyethylene film by the pre-irradiation method was investigated.
采用预辐射法研究了丙烯酸对聚乙烯膜的接枝反应。
An experimental study dealing with summer corn covered by photo-biodegradable polyethylene film was evaluated with control.
对普通膜与光-生双降解膜覆盖下的夏玉米试验结果进行了分析。
Adopting large area Si-PIN detector and adding the polyethylene film, a fast response pulsed neutron detector is manufactured.
采用大面积的平面工艺硅pin探测器，并结合聚乙烯片，研制了快响应的脉冲中子探测器。
The effect of deforming velocity on the tensile properties of the polyethylene film for packaging is studied by mechanical tensile test.
采用拉伸实验，研究形变速率对聚乙烯包装薄膜力学性能的影响。
Different treatments of temperature and polyethylene film bag packing were carried out to investigate their effects and physiological basis during Huanghua pear storage.
研究了不同贮藏温度和不同聚乙烯薄膜袋包装处理对黄花梨果实贮藏效果的影响及其生理基础。
Waterproof coiled materials of SBS are a flexible felt of polyester fibre as casing, SBS modified asphalt as coating and polyethylene film as antiseizing separation layer.
SBS防水卷材是以聚脂纤维为胎体，以SBS橡胶改性石油沥青为漫渍涂盖层，以聚乙烯塑料薄膜为防粘隔离层的一种柔性油毡。
The vitrification rate caused by cotton plug wrapped in cheese cloth was the lowest among all seal materials, including polyethylene film, plastic cover and sulfuric paper.
封口材料中聚乙烯膜和塑料瓶盖两个处理玻璃化率相似且玻璃化率高，硫酸纸次之，棉塞的最低。
The superposed structure has needle punched polyester wool as bottom layer, polyethylene film as the middle layer and hot rolled non-woven polyester fabric as the upper layer.
叠合结构为聚酯针刺棉为底层，聚乙烯膜为中层，聚酯热轧无纺布为上层；
Twist-Lyte 23TH185 ExxonMobil Chemical Oriented HDPE Film A metallized, non sealable biaxially oriented high-density polyethylene film. Designed especially for twist-wrap applications.
非热封双向拉伸高密度聚乙烯薄膜，特别为扭曲，包装应用而设计。
The feasibility to develop wax by use of waste polyethylene film is mainly studied. The condition of high temperature and low pres- sure and a newly manufactured catalyst are used in the research.
本文主要讨论了用废聚乙烯薄膜制石蜡的可行性。采用高温、低压的反应条件，加入自制的催化剂；
In this paper, the design, manufacturing technology, and factors of quality control of heat shrinkable polyethylene film were introduced. And detailed examples of its application were given as well.
本文介绍了聚乙烯热收缩薄膜的设计、制造工艺和控制质量的要素，并介绍了应用实例。
A new packing material for the first aid dressing is reported. This material is compo sed of "52" cloth and aging-inhibiting polyethylene film. The characteristics of this composite cloth are given.
本文介绍一种以“52”布为基材，以防老化聚乙烯膜为复合层的新型急救包包装材料——防老化聚乙烯复合布的研究情况及其主要性能指标。
According to the comparison of several impervious films, the dependability and application of high density polyethylene (HDPE) film at city waste sanitary landfill were expounded in this paper.
通过对几种防渗膜的性质比较，阐述了高密度聚乙烯(HDPE)膜用于城市生活垃圾填埋场的可靠性及应用情况。
The company mainly produces polyethylene cushion film crew, the crew used a molding technology, production efficiency, good quality products.
本公司主要生产聚乙烯气垫膜机组，该机组采用一次成型工艺，生产效益高，制品质量好。
The Numatics Actuator Group hole punch Cylinder is perfect for punching holes in LLDPE (Linear Density Polyethylene) film.
纽曼帝克集团的执行机构气缸孔打孔机非常适合在LLDPE冲压洞(线性低密度聚乙烯)薄膜。
High density polyethylene (HDPE) film have many advantages, such as high-strength, imperviousness, corrosion resistance, age resistance, convenient to construct, and so on.
高密度聚乙烯膜具有强度高，防渗性能好，抗腐蚀、抗老化能力强，施工方便等优点。
The present paper discusses the effect of temperature and humidity on the electric strength of low-density polyethylene (LDPE) film for various stressing modes.
本文讨论温度及湿度对不同应力模式下低密度聚乙烯(LDPE)薄膜电强度的影响。
Designed for punching holes in LLDPE (Linear Low Density Polyethylene) film.
冲压设计在LLDPE洞(线性低密度聚乙烯)薄膜。
Polyethylene rope line, polypropylene rope, tear film when lines renewable plastic materials, plastic production equipment for processing.
聚乙烯绳线，聚丙烯绳索，撕裂膜绳线，废旧塑料再生，塑料生产设备加工。
The hot melt adhesive was extruded into film by an extruder and then was laminated hotly with crosslinking polyethylene flat and glass fibre net with large holes so the fixing flat was obtained.
用挤出机将其挤成胶膜后与交联聚乙烯基材，大孔径玻璃纤维网热复合制成固定片。
The hot melt adhesive was extruded into film by an extruder and then was compounded hotly with crosslinking polyethylene flat and glass fibre net with large holes so the fixing flat was obtained.
用挤出机将其挤成胶膜后与交联聚乙烯基材，大孔径玻璃纤维网热复合制成固定片。
The FDA approved film is a blend of low density polyethylene and nylon that will hold liquids, solids, sauces, gravies, and other samples having a high temperature.
这种由低密度聚乙烯制成的取样袋，经美国FDA批准可以用于存放液体，固体，调味汁，肉汁混合，以及其他具有高的温度的样品。
The time domain dielectric spectroscopy for polyethylene terephthalate film and glass samples is studies.
对涤纶和玻璃的时域介电谱进行了研究。
The time domain dielectric spectroscopy for polyethylene terephthalate film and glass samples is studies.
对涤纶和玻璃的时域介电谱进行了研究。
应用推荐