The typical technologies of impact modified polypropylene(PP)prepared in-situ in reactor were reviewed.
综述了反应器内生产抗冲改性聚丙烯（PP）的典型工艺。
The properties of polypropylene(PP) by equal channel angular extrusion(ECAE) processing were investigated.
研究了模压成型聚丙烯（PP）经等通道转角挤压（ECAE）加工后的性能。
For many advantages of polypropylene(PP), so it is become the best part material for auto in recent years.
聚丙烯（PP）由于具有价格低、原材料丰富、力学均衡性好、耐化学腐蚀等特点，近年来成为最热门的汽车零部件材料。
Styrene-butadiene-styrene block copolymer(SBS)modified with organic montmorillonite(OMMT)was utilized to toughen polypropylene(PP)in this paper.
采用纳米有机蒙脱土（OMMT）改性的苯乙烯-丁二烯-苯乙烯嵌段共聚物（SBS）增韧聚丙烯（PP）。
The polypropylene(PP) was modified by self-made sericite-based inorganic UV-screen agent, and the mechanical properties of the PP composites after light aging were tested.
用自制的绢云母质无机紫外屏蔽剂改性聚丙烯（PP），对光老化后的PP复合材料进行力学性能测试。
The modified PP fiber was prepared by blending a dispersant, nano-calcium carbonate and polypropylene (PP) chips at a specific ratio.
将分散剂、纳米碳酸钙和聚丙烯(PP)切片按一定比例混合纺丝制得改性PP纤维。
The effect of some organic phosphates on the dynamic mechanical behavior of polypropylene (PP) was studied.
研究了有机磷酸酯成核剂对聚丙烯(PP)动态力学行为的影响。
Stabilization treatments of small bulk polypropylene( PP) resin were performed by using antioxidants and light stabilizers made in China.
选用国产抗氧剂和光稳定剂，对小本体聚丙烯树脂进行了稳定化试验。
Polypropylene (PP) is one of the most promising thermoplastic polymer. However, the use of polypropylene has been restricted because it is a kind of non-polar polymer.
聚丙烯(PP)是最具发展前途的热塑性高分子材料之一，但是，由于它是非极性聚合物限制了其使用。
In this paper, a new process of removing dissolved oxygen using hydrophobic polypropylene (PP) hollow fiber was offered and studied. The strength of the hollow fiber was measured.
提出并研究了一个利用疏水性中空纤维膜去除水中溶解氧的新工艺，测定了所采用的聚丙烯(PP)中空纤维膜的耐压性能。
This paper outlined the membrane separation technology and analyzed the application status of the technology in the propylene-nitrogen system of the polypropylene (pp) plant.
简要介绍了膜分离技术，并对膜分离技术应用于聚丙烯装置的丙烯-氮气系统的现状进行了分析。
Polarizing microscopy and differential scanning calorimetry (DSC) were used to study the effect of carbon fiber on the crystallization of polypropylene (PP).
本文用偏光显微镜和示差扫描量热计（DSC）方法研究了碛纤维对聚丙烯结晶行为的影响。
The wood-polymer composite(WPC) was manufactured by twin-screw extruder with recycled polypropylene (PP) and wood powder as material.
以再生聚丙烯（PP）、锯末木粉为原料，采用双螺杆挤出机挤出造粒制备了塑木复合材料。
The effect of silane coupling agent KH-550 as a compatibilizer in polypropylene (PP)/phosphate ester dibromoneopentyl glycol acid (PEA) composites was studied.
考察了硅烷偶联剂KH-550在聚丙烯（PP）/酸式二溴新戊二醇磷酸二酯（PEA）复合体系中的增容作用。
The transparent polypropylene (PP) special material for injection is prepared by adding nucleating agent to homopolymerized PP matrix.
以均聚聚丙烯(PP)为基体树脂，通过添加成核剂制备了注塑级透明pp专用料。
The effect on the toughening of polypropylene (PP) by styrene-ethyl ene propylene diblock copolymer (SEP) as well as EPDM was studied.
考察了苯乙烯-二元乙丙橡胶嵌段共聚物(SEP)和三元乙丙橡胶(EPDM)对聚丙烯(PP)的增韧作用。
Hoist hopper is made of food-grade polypropylene (PP), With artistic looking, ·Resistance heat and cold.
提升机料斗由食品级聚丙烯（PP）材料铸模而成，外型美观，不易变形，能耐高低温。
A method for rapid quantitative determination of dibenzylidene sorbitol clarifying agents in polypropylene (PP) by Fourier transform infrared spectrophotometry (FTIR) was developed.
建立了用傅立叶红外光谱仪快速检测聚丙烯中二苄叉山梨醇类透明剂含量的方法。
This paper introduced the development of speciality polypropylene (PP) resin TJ 1036 lor spinning, which was produced with the chemical degradation process.
介绍了用化学降解法生产聚丙烯纺丝专用树脂TJ 1036的开发过程。
The modification of polypropylene (PP) and its blends with low molecular weight ethylene-propylene copolymer (LMW-EP) was studied in this work.
本文研究了采用低分子量乙丙共聚物（LMW-EP）对聚丙烯（PP）及其共混体系的改性。
The degradations of polystyrene(PS) and the mixture of PS/polypropylene (PP) in supercritical water were studied in this article.
对聚苯乙烯（PS）和聚苯乙烯（PS）与聚丙烯（PP）的混合塑料进行了超临界水降解实验。
The influence of laser transmission welding parameters for polypropylene (PP) plastics on welding quality is investigated by orthogonal design method.
利用正交实验方法，研究了聚丙烯(PP)塑料的激光透射焊接工艺参数对焊接质量的影响。
The varieties and action mechanisms polypropylene ( PP) flame retardants are presented. The research progress of PP flame retardants is reviewed.
本文综述了聚丙烯阻燃剂的种类和作用机理，并且介绍了聚丙烯阻燃剂的最新研究进展。
Antistatic polypropylene (PP) was prepared by means of blending PP with antistatic agent.
通过共混复合的方法制备出具有抗静电性能的聚丙烯(PP)。
Bubble effect in aqueous slurry of powder polypropylene (PP) using poly (vinyl alcohol) (PVA) as the stabilizer which is used as a sort of raw materials in rotational moulding has been investigated.
研究了以粉状聚丙烯为原料、以聚乙烯醇(PVA)为稳定剂的旋转成型浆液料中的气泡效应。
This paper reviewed current status and development trend of catalyst systems, technologies and grade developments of polypropylene (PP) in China.
综述了我国聚丙烯(PP)催化剂、生产工艺和产品开发的现状及发展趋势。
The polypropylene (PP) plate-and-frame strengthened by siliceous limestone has high mechanical strength and good resistant properties to chemical corrosion.
硅灰石增强聚丙烯塑料板框具有机械强度高和耐化学腐蚀的性能。
Antioxidants: Polymers such as polypropylene (PP) are not usable outdoors without appropriate stabilizers, because of the presence of readily removable hydrogen atoms on the tertiary carbon atoms.
抗氧剂：有的聚合物，如聚丙烯，如果其中不加适当的稳定剂，就 不能在户外使用，这是因为它分子中的叔碳原子上存在着易消除的氢原 子。
Antioxidants: Polymers such as polypropylene (PP) are not usable outdoors without appropriate stabilizers, because of the presence of readily removable hydrogen atoms on the tertiary carbon atoms.
抗氧剂：有的聚合物，如聚丙烯，如果其中不加适当的稳定剂，就 不能在户外使用，这是因为它分子中的叔碳原子上存在着易消除的氢原 子。
应用推荐