It is mainly one-component polyurethane, silicon rubber and polysulfide rubber.
它主要包括单组分的聚氨酯、硅橡胶和聚硫橡胶等。
The invention further discloses a preparation method for the positive material polysulfide carbyne of the battery.
还公开了一种电池正极材料多硫化碳炔的制备方法。
Epoxy resin toughened by liquid polysulfide rubber exhibits good anti-impact performance and anti-bend performance.
液态聚硫橡胶增韧的环氧树脂胶表现出良好的抗冲击性能和抗弯曲性能；
The production process and formula of polysulfide sealant were introduced, the application progress is reviewed also.
本文阐述聚硫密封剂的配方组成、生产工艺及应用概况。
The experimental method and the optimal process conditions for the production of crystal calcium polysulfide is studied.
研究了制备晶体石硫合剂的实验方法和最佳条件。
It was found in this experiment that the epoxy resin had the varying degree influence to the several properties of polysulfide sealant.
试验发现，环氧树脂对聚硫密封胶的多项性能都有不同程度的影响。
The polysulfide solution is one of non cyanidation systems of gold leaching in which polysulfide ions are the main effective components.
多硫化物溶液是一种非氰化浸金体系，其中的有效成份是多硫根离子。
The invention pertains to the technical field of adhesives and discloses a modified polysulfide rubber and a preparation method thereof.
本发明属于粘合剂技术领域，公开了一种改性聚硫橡胶及其制备方法。
The influence of the ratio of polysulfide rubber and epoxy resin, and amount of hardener on the properties of coating film are discussed.
讨论了聚硫橡胶与环氧树脂的配比和固化剂用量对涂层性能的影响。
The results showed that the inhibition performance of compounded corrosion inhibitor, sodium polysulfide and benzotriazole, was significant;
结果表明， 多硫化钠与苯并三唑复配后其缓蚀效果较明显；
As a first insulating glass sealant in insulating glass production, to complete the double sealing with Silicone sealant, polysulfide sealant.
中空玻璃生产中第一道密封，与聚硫胶、硅酮胶配套使用，以完成双道密封。
The study provide the technical accumulation for developing of polysulfide sealant and increasinging the bonding capability of polysulfide sealant.
为提高聚硫密封剂的粘接性能提供了技术依据。
As special function is required, the construction of polysulfide sealing compound turns into a key procedure in project of a sewage treatment plant.
由于特殊功能要求，聚硫密封膏的施工成为某污水处理厂工程的关键工序。
The main principle of the new process is: firstly , hydrogen sulfide ion is oxidized to polysulfide and hydrogen is released simultaneously at the same time;
该工艺的主要原理为：第一步通过直接电解将硫氢根离子氧化生成较高级的多硫化物，同时制取氢气；
Epoxy resin is the common tackifier for polysulfide sealant. Adding epoxy resin into polysulfide sealant can exert an auxiliary effect on viscosity increasing.
环氧树脂是聚硫密封胶常用的增粘剂，在聚硫密封胶中加入环氧树脂可以起到明显的增粘作用。
The machine is special equipment for extruding two-component polysulfide sealant and two-component copper silicon for manufacturing aluminum-frame type insulated glass.
本机是制作槽铝式中空玻璃或幕墙玻璃时，注涂双组份聚硫密封胶和双组份硅硐结构胶的专用设备。
A series of polysulfide based thio-polyurea was synthesized, which were based on isophorone diisocyanate, liquid polysulfide and 2,5-diamino-3,6-dimethylmercapto toluene.
以液态聚硫橡胶、异氟尔酮二异氰酸酯和扩链剂3，6 -二甲硫基-2 ，5 -二甲苯胺为原料，合成了不同硬段质量分数的聚硫硫代聚脲。
This article introduced mainly the composition, the production process, the curing mechanism, the characteristics and the application situation of the polysulfide sealant.
主要阐述了聚硫密封胶的构成、生产工艺、固化机理、性能特点及应用情况。
Modified polysulfide sealants for insulating- gl ass are mainly made from modified polysulfide rubber, plasticizer, thickener and fi ller and it is a two-component sealant.
以改性聚硫橡胶为基胶，并与增塑剂、增稠剂、填充剂等配合制成双组分改性聚硫中空玻璃密封剂。
The results show that the level of polysulfide polyurea and the content of hard segment in polysulfide polyurea influence the morphology, T_g and modulus of cured epoxy resin.
结果表明，液体聚硫聚脲齐聚物的用量、齐聚物中聚脲含量对固化后的环氧树脂玻璃化温度、模量及形态有较大影响。
A polysulfide rubber modified epoxy water-proof and corrosion protective coating has been developed, which is used for water-proofing and corrosion protection of metals and concrete.
研制了聚硫橡胶改性环氧防水防腐涂料，用于金属和混凝土表面的防水防腐。
Test result indicates that silicone sealant has excellent elastic recovery under different conditions, and the two-component polysulfide sealant has relatively higher elastic recovery.
通过测试不同密封胶样品在不同试验条件下的弹性恢复率，比较了它们的弹性恢复性能。
Test result indicates that silicone sealant has excellent elastic recovery under different conditions, and the two-component polysulfide sealant has relatively higher elastic recovery.
通过测试不同密封胶样品在不同试验条件下的弹性恢复率，比较了它们的弹性恢复性能。
应用推荐