The amplifier has a power isolation circuit and bandwidth limiting to reduce oscillations and motorboating.
该放大器具有电源隔离电路和带宽限制，以减少振荡和汽船排气声。
When supply modulation and contour modulation are working in concert, the dynamic range and efficiency of the power amplifier can be further improved.
当电源调制和轮廓调制协同工作时，功率放大器的动态范围和效率可以进一步提高。
Linearization and efficiency enhancement techniques of power amplifier can be adopted to improve the linearity and power efficiency of the transmitter.
于是功率放大器的线性化以及提高效率的技术被采用来改善发射器的线性度和效率。
This means that you may use one channel of your power amplifier to power both a subwoofer and a full-range speaker, while maintaining a reason-able load on your amplifier.
这意味着您可以使用您的一个功率放大器渠道权力既低音炮和全频音箱，同时保持一个原因，在你的功放的负载能力。
And then the paper introduces the design of power amplifier and DC regulated power supply.
论文重点介绍了功率放大器和直流稳压电源的设计。
The theory research results of one cycle controlled switching power amplifier show that the output signal follow the input signal linearly, and the control performance is decided by output filter.
理论分析结果表明，单周控制开关功率放大器的输出信号与输入信号成线性变化关系，其控制性能由输出滤波器决定。
In the transmit direction, the transceiver provides RF signals to the power amplifier, which amplifies the signals based on gain and ramp information for a given modulation type.
在发送方向，收发信机向功率放大器提供射频信号，功率放大器根据给定调制类型的增益和斜坡信息对信号进行放大。
Linear power amplifier has low distortion and good linearity, but it has high loss and so low efficiencies.
线性功率放大器有失真小、线性好等优点，但是其损耗大，效率低。
The outlook of high frequency switch power supply in application to high fidelity audio frequency power amplifier is indicated.
指出了高频开关电源在高保真音频功率放大器中广阔的应用前景。
Schematic design for infeed and power amplifier circuit.
输入电路和功率放大电路的原理图设计。
A high power filter (38) is located downstream of the power amplifier (20) and causes linear distortion.
大功率滤波器(38)位于功率放大器(20)的下游并引起线性失真。
LDMOS is also widely used in the field of large area flat panel displays and automotive electronics as a high-voltage power amplifier devices.
而作为高压功率放大器件，在各种大面积平板显示屏和汽车电子领域也得到广泛应用。
Finally, the author analyzes the possibility to cut down power waste of amplifier further, improve the efficiency and reliability, decrease the volume of power amplifier.
最后，分析了进一步降低功率放大器的功耗、提高效率、提高可靠性，减小功放体积的可能性。
The dream output element, the vertical power FET, was used for the first time in this all-FET power amplifier.
梦幻输出，垂直场效应管FET功放，这个是第一个全FET功率放大器。
And the power amplifier can realize accurately tracking and amplification for ac signals with frequency range up to 1000hz.
功率放大器可以实现交流信号的准确跟踪和放大，输出频率范围可达1000赫兹。
For solving this problem, various linearization techniques have been employed to improve the linearity of high efficiency power amplifier.
要解决这个问题，必须采用线性化技术来改善高效率功率放大器的非线性特性。
Technically the H20 may be the best power amplifier we have ever made. Regardless of price.
技术上H 20可能是最好的功率放大器，我们做了一个。无论价格。
In order to realize a stabilization system, the response rate of the power amplifier feeding the stabilization coils must be fast enough.
为了实现垂直位移方向上的稳定，给主动控制线圈供电的功率放大器的响应速度必须具有快速性。
The linear power amplifier of current-type and the PIDcontroller is designed for the control of radial force.
针对径向力的控制要求研制了双向电流型线性功率放大器和PID控制器。
Actuation of one clutch provides positive torque to the final drive, the capstan acting as the main power amplifier.
一个离合器的作用是给最后一级传动机构，即作为主功率放大器的绞盘，提供正向力矩。
This paper introduces the design of common apparatus and ways to make digital power amplifier.
本文介绍了用常用器件设计、制作数字功率放大器的方法。
The power amplifier is executor of the controller's control command, its performance has important influence on the overall system.
功率放大器是控制器控制命令的执行者，它的性能对整个系统有着重要影响。
This paper describes the general design rules of switching power amplifier and analyses different control strategies.
本文讨论了开关功放设计的一般原则，分析比较了不同的控制策略。
This paper will introduce the design of power amplifier in detail.
本文详细介绍了功率放大器的设计。
While it had excellent sound quality, the low efficiency of the power amplifier unit made commercialization difficult.
尽管它有非常出色的音质，但是由于功率利用率低的问题，商业化是比较困难的。
PNP epitaxial silicon transistor. Low frequency power amplifier.
PNP外延硅晶体管。低频功率放大器。
B, no noise tracking method: input power amplifier (RCA), released the CD signal output, check whether there is noise.
没有噪音的跟踪方法：将功放的输入(rca)恢复，解除CD机的讯号输出，检查是否有噪音。
B, no noise tracking method: input power amplifier (RCA), released the CD signal output, check whether there is noise.
没有噪音的跟踪方法：将功放的输入(rca)恢复，解除CD机的讯号输出，检查是否有噪音。
应用推荐