This article presents the methods of solving the interference problems in the process computer control system by software algorithms .
本文提出了用软件实现过程计算机控制系统中抗干扰问题的方法 ，并介绍了各种数字滤波的算法思想 。
After analyzing the process of the computer room management and studying some Cyber-Cafe management system, the concept framework of the computer room monitor and control system was gained.
作者在对机房微机管理过程进行了详细调查后，参考了一些网吧的微机管理系统，获得了机房监控系统的设计思路。
Methods The computer control was adopt and based on operational process to design system functional modularization.
方法：采用计算机控制，根据操作流程进行系统功能的模块化设计。
Computer skills - Process control system.
计算机过程控制系统技能。
Operate the physical-chemical and the biological w. w. t. plant by computer aided process control system (visualisation).
通过可视化计算机辅助过程控制系统操作物化废水处理系统。
The reheating furnace process computer system goals are mainly dynamic production process control, process operation records tracking, and production process optimization with metallurgy model.
再加热炉过程控制计算机系统的主要目的是实现生产动态过程控制，跟踪操作记录，同时通过冶金模型进行生产过程优化。
Process accuracy, reliability and repeatability are guaranteed by the automatic computer control system, resulting in much higher consistency of production and much better film quality.
计算机自动控制保证了的镀膜过程的精确控制、可靠性和重复性，从而导致更高的生产一致性和膜层质量。
This system not only remedied the function defects of the traditional fluorescence microscope, but also realized the computer control and the process and spectral analysis of the fluorescence image.
本系统不仅弥补了传统荧光显微镜的功能缺陷，而且实现了系统的计算机控制及荧光图像的处理、光谱分析等功能。
The topic of this graduation project is: Two grades computer Carburization process Distributed Control System.
本次毕业设计的题目为：两级计算机实现的渗碳过程集散控制系统。
Finally, some proposals on research and design of communication network for process computer automatic control system are offered.
最后，对计算机过程控制系统的通讯网络试制研究提出些建议。
A computer system controls the motion and power pulse of whole process by intelligence control theory.
一种基于智能控制理论的计算机系统控制整个处理过程的运动和电源脉冲。
This type of system control software, computer interface, the computer recording and displaying the testing process and result.
该型含系统控制软件、计算机接口，可在计算机上全程记录和显示测定过程和结果。
The fault types and fault diagnostic process of the automobile computer control system are offered here. The methods to confirm, analyze and diagnose the faults are also expounded.
给出汽车计算机控制系统的故障类型和故障诊断流程，阐述故障确认、故障分析、故障确诊的方法。
This system consists of control cell, sensor, mathematical model, control algorithm, and computer and technological process.
本系统由控制单元、传感器、数学模型、控制算法、计算机及工艺过程组成。
The working process of experiment fluidized bed with high temperature and pressure is described, and a computer control system with a spare manual control is designed by combining computer with meter.
描述了高温高压流化实验床的工作过程，采用计算机控制和仪表控制相结合的设计思想，设计了具有手动后备的计算机控制系统。
It is a computer control system for whole process. The drive of main-motor USES digit controlled drive.
该系统在生产全过程中实现计算机控制，主电机传动采用数字控制传动装置。
This article briefly introduces the process of production input control for modifying design of buses and presents how to design database of production input control by the computer system.
简要介绍客车设计更改后的生产投入控制应用流程及怎样用计算机系统建立生产投入控制数据库。
The system is controlled by computer, realizing the all flow control process through "one-key" operation.
该系统由电脑控制，实现了“一键式”作业全过程流程控制。
The pater applies the head loss model to design a set of computer control system, it can be realized automatic surveillance of deep bed filter process.
同时利用阻力模型设计了一套计算机控制系统，实现了深层过滤过程的自动化监测。
Finally the structural design and the implemented scheme of a computer control system for an industrial spiramycin fermentation process is described in detail for illustration.
最后，针对螺旋霉素工业发酵过程计算机控制系统的实际课题，运用上述方法对其系统结构设计和实施方案作了详细介绍。
The computer simulation result shows that this algorithm is simple and useful, and can be available for computer process control system to improve the control character.
计算机仿真结果表明，该算法简单实用，控制效果较理想，适宜于采用计算机的过程控制系统。
The control system for the sirosmelt furnace process which implemented by industrial control computer can control the atmosphere of oxidizing-reducing process in the furnace effectively.
由工业控制计算机实现的浸没熔炼过程控制系统能有效地控制炉内的氧化还原性气氛。
Based on the technological characteristics and requirements of grinding process at Hedong Gold Mine, a JS-872 separate computer control system of grinding process has been developed.
基于河东金矿磨矿过程工艺特点和要求，研制了JS- 872型磨矿过程计算机分散控制系统。
Programmable computer control system and process control at the same time.
微机控制系统可编程与加工控制同时进行。
The leader of enterprise attend how to use CIMCS(Computer Integrate of Management &Control System) to mange and control production process.
因此，如何利用管控一体化技术对生产过程进行管理和控制越来越受到企业领导的关注。
The intelligent pattern classifier and its realization techniques are discussed according to the classing process in a computer control combined tea-stalk reject system.
结合组合式电脑茶叶拣梗机的模式分类问题，讨论了模式分类器智能化及实现策略。
Discrete event system comes from the background rising from computer operating system to the control of complex, diverse process model.
离散事件系统是从计算机操作系统到复杂多样模型进程的控制这众多背景下产生的。
Design and application of two level computer control system that consists of PLC and process computer for concentrate measuring and sampling in copper melting plant are described.
介绍在铜冶炼厂由PLC和上位机组成的两级精矿自动计量和取样计算机控制系统的设计和应用情况。
A computer control system for beer saccharification process is introduced which is equiped with a superior computer and takes an OMRON C200H as its programmable controller.
介绍以omron C2 0 0 H可编程控制器为主控机，配有上位计算机的啤酒糖化工艺计算机控制系统。
A computer control system for beer saccharification process is introduced which is equiped with a superior computer and takes an OMRON C200H as its programmable controller.
介绍以omron C2 0 0 H可编程控制器为主控机，配有上位计算机的啤酒糖化工艺计算机控制系统。
应用推荐