The host includes a start information generation program circuit for generating password generation start information which has not been used in the past.
主机包括开始信息产生程序电路，用来产生过去没有用过的口令产生开始信息。
Design a data collection module with serial port based on microcontroller. The thesis explains the circuit principle and program designing in detail.
设计了一个串口通讯的单片机数据采集模块，文中详细阐述了模块的电路原理和程序设计。
This paper detailedly introduces the whole design scheme of the system, the circuit on interface module and 89c51, the method of the software design and program flow chart.
详细阐述了系统的总体设计方案，给出了界面模块与89c51接口电路，最后介绍了软件设计方法及程序流程图。
The design of hardware circuit is explicated and the diagram of program is offered.
详细描述了硬件电路的设计，并给出了软件程序框图。
The host program takes on the complex computational tasks such as parameter adjusting and the waveform data subdividing, which simplifies the circuit for the peripheral unit.
将参数调整，波形数据细分的复杂计算任务交于主机程序完成，简化了外设执行部件的电路结构。
This paper puts forward a method of designing fluid logic circuit according to program characteristics and productive conditions.
本文提出从程序特征及生产条件出发选用流体逻辑回路设计方法。
The paper also design some specific hardware interface circuit to explain its word principle. And also explained program chart of dyeing machine blow head in the application.
本文还设计具体的硬件接口电路，说明其工作原理，给出应用于染色机喷头控制系统的程序流程。
The characteristics and operating principle of DS3070W are introduced, the typical application circuit with AT89C51 and software program code are given.
介绍了DS3070W的性能特点及工作原理，给出了它与AT 89c51的典型应用电路及子程序。
In the software aspect, it curtly introduces flow chart of main program and the programming method of all ports of circuit.
在软件方面，介绍了主程序的流程图及各部分电路的编程方法。
Lastly, the hardware circuit, VHDL program design and debugging methods based on FPGA are discussed.
最后对基于现场可编程门阵列(FPGA)的硬件电路、VHDL语言程序设计及调试方法进行了讨论。
PID regulation in instrumentation circuit is realized by using program logic controller.
利用可编程序控制器实现仪表回路的PID调节控制。
Owing to the result of the design is a special arithmetic circuit, no program is run, reliability and stability is better then the designing by CPU.
由于设计的结果是一个专用的算式电路，不运行任何程序，工作的可靠性和稳定性都优于用CPU设计。
Introduces the circuit, program flow and operation sequence of the serial-scan mode static locking display.
介绍一种串行扫描方式静态锁存显示的电路、程序流程和工作时序。
The simulation with PSPICE program proved that the designed circuit has ideal character of Schmitt circuits.
用PSPICE程序模拟证明了所设计的电路具有理想的施密特电路特性。
The design principle and circuit construction and program process of apparatus of the best ignition angle for motorcycle engine are introduced.
介绍了一种摩托车发动机最佳点火角试验仪的设计原理、电路结构和程序流程。
Adding the watchdog circuit, the system can avoid program operation confusion and assure the system operation normal.
看门狗电路的加入，使系统避免程序运行混乱，保证系统正常工作。
Finalization of the relevant programs and Protection of the secondary circuit program.
最后确定相关的保护方案和二次回路方案。
This paper introduces the work principle, components of hardware circuit and relative program flow of the control.
这里介绍了这种控制器的工作原理、硬件电路组成及有关的程序流程。
Recording medium, reproduction device, program, reproduction method, and system integrated circuit.
记录介质，播放装置，程序，播放方法，系统集成电路。
The article also introduces design process, circuit and program structure.
给出了较详细的设计过程、电路和程序结构。
An introduction to the circuit structure and program of universal CAN node as well as the application in inductive heating.
介绍一种通用CAN节点的电路结构、相关应用程序及在工业中频感应加热设备控制现场总线中的应用。
In real time control system, it is important to design the clock control circuit and program.
在实时控制系统中，时钟控制电路及程序的设计十分重要。
Exponentially increasing of the state number of a system causes the combination exploring with the scale of program or circuit increasing.
随着程序或电路规模的增大，状态数目将呈指数增加而引起组合爆炸。
Explicated the structure and principle of work of ultrasonic launching and receiving circuit, presented the program frame and part program of the date processing.
并对超声波发射接收电路的硬件结构和工作原理做了较详细的说明，给出了数据处理系统程序框图和部分程序。
Recording medium, playback apparatus, program, playback method, system integrated circuit.
记录介质，播放装置，程序，播放方法，系统集成电路。
This paper introduces the application of HH204 stepping motor's driver on multi-rate register, presents a circuit and driver program.
介绍HH204步进电机驱动电路在复费率计度器上的应用，给出了硬件电路和驱动程序。
The paper simply introduces the evacuation system for model H-600 electron microscope and analyzes the program of evacuation and the program control circuit.
文章简要介绍了日立h- 600型电子显微镜抽真空系统，分析了抽真空程序及其程序控制电路。
Playback apparatus, playback authorization server, program, and system integrated circuit.
播放设备，播放授权服务器，程序，以及系统集成电路。
Playback apparatus, playback authorization server, program, and system integrated circuit.
播放设备，播放授权服务器，程序，以及系统集成电路。
应用推荐