We could obtain dictates in the steady-state visual evoked potential (SSVEP) and can control the spatial movement of the artificial limb through a programmable logic controller (PLC).
通过基于稳态视觉诱发电位构造的脑-机接口获取控制指令，通过可编程逻辑控制器(PLC)控制机械手完成规划的动作。
Programmable logic controller is short for PLC. It is a special purpose industry control machine, that kernel is single chip microcomputer.
可编程逻辑控制器简称为PLC，它是以单片机为核心的工业控制专用机。
In order to meet the demand of different control systems, the function, capacity, operation rate and communication capability of programmable logic controller were enhanced continually.
为适应不同的控制系统需求，可编程序控制器的功能、容量、运算速度、以及通信能力都在不断地增强。
This paper mainly introduces the PLC (Programmable Logic Controller) control system of new-style cross cutting unit. The function of this system.
本文主要介绍太钢新横切机组PLC控制系统的硬件配置、控制功能及软件程序框图。
Programmable Logic Controller(PLC)course is a very practical course, PLC is an application technology of computer technology in the field of industrial control.
可编程序控制器简称PLC课程是一门实践性很强的专业课程，PLC是计算机技术在工业控制领域的一种应用技术。
The Programmable Logic Controller(PLC) control the hydraulic adjustment system.
液压调节系统是由可编程序控制器（PLC）来控制的。
Using the programmable controller in the automobile rear axle house ring stiffener, logic sequential control was realized in the top plate automatic welding craft.
采用可编程控制器在汽车后桥壳加强环、后盖自动焊接工艺中实现逻辑顺序控制。
This paper develops a set of barycentre of plane automat Ed control system based on industrial personal computer and programmable logic controller aiming at the defect of avionics in our country.
针对目前我国机载航空电子设备特别是重心控制设备的落后现状，设计一套基于工业控制计算机和可编程逻辑控制器的飞机重心自动控制系统。
For the accelerator magnet power supply, usually the Programmable logic controller (PLC) is used to server as the controller for logic protection and control.
加速器磁铁电源的逻辑保护和控制一般通过可编程逻辑控制器PLC实现。
The functions and characters of Siemens PLC (Programmable Logic Controller) are introduced. The control precision of Siemens PLC is improved through equipped with transducer.
详细介绍了西门子可编程序控制器(plc)的功能和特点，通过西门子PLC和变频器相配合，提高了控制的精确度。
Processing AD transfer, data have been processed by the Programmable Logic controller, it obtains control signal of Temperature, it has flexibility and reliability of control.
通过AD变换，由可编程序控制器进行数据处理，获得温度控制信号，使控制灵活、可靠。
It is mainly composed of DMA controller (82c37), interrupt controller (82c59), programmable interval timers (82c54), DRAM refresh control, wait state generator and system reset logic.
其内部主要由DMA控制器(82c37)、中断控制器(82c59)、可编程间隔计时器(82c54)，DRAM刷新控制器，等待状态产生器，系统重置电路组成。
The MOCVD system is specifically introduced, and the gas flow automatic control method based on the mass flow controller(MFC) and programmable logic controller(PLC) is studied and analyzed.
研究分析了基于质量流量控制器、可编程序控制器和触摸屏的自动控制系统气体流量自动控制方法。
The functional design of each unit allows it to be equipped with a control panel using a programmable logic controller with an operator interface for a highly user-friendly operation.
每个单元功能设计成允许装配一个由逻辑程序控制器控制的拥有高度友好用户界面的控制面板。
The principle of the skimming oil and scraping sediment machine and its control system design based on programmable logic controller (PLC) are introduced.
介绍了撇油刮渣机的工作原理 ，采用PLC可编程逻辑控制器设计了该机的控制系统。
The control device for large bulb unit bearing oil system is ba sed on the programmable logic controller and programmable operator interface.
介绍了基于可编程序控制器和工业显示触摸屏的大型贯流式水轮发电机组轴承油系统控制装置的主要设计特点。
The application and good result of programmable logic controller using in the system of hoist lift signal and operation control in coal mine are introduced.
介绍了可编程序控制器在煤矿绞车提升信号系统和操车控制系统中的应用及收到的显著效果。
According to the requirements of the landfill LFG to energy, we use programmable logic controller of Siemens and distributed control system of Emerson to achieve the control process.
根据垃圾填埋气发电的要求，采用西门子的可编程逻辑控制器和艾默生的集散控制系统来实现工艺过程的控制。
The application of programmable logic controller in the control system of the hot billet marking equipment was introduced.
主要介绍了可编程序控制器在热钢坯端面打号机控制系统中的应用。
According to the characteristics and requirements of Xidian Univ. MOCVD system, a research and design about the MOCVD control system based on programmable logic controller are carried out.
针对西安电子科技大学MOCVD系统，根据MOCVD系统工艺要求，进行了基于可编程逻辑控制器的MOCVD设计与研究。
The design of CNC Machining Center Tool Library, entitled control, knife set by the PLC (programmable logic controller) control to achieve its functions.
本次设计的题为数控加工中心刀具库控制，刀盘由PLC(可编程序控制器)控制来实现其功能。
The application of programmable logic controller(PLC) in the control system of the hot billet marking equipment was introduced.
主要介绍了可编程序控制器（PLC）在热钢坯端面打号机控制系统中的应用。
With the development at full speed of technology of the computer and industrial control, it is feasible to apply the technology of computer and programmable logic controller into the heat pump dryers.
随着计算机技术和工业控制技术的飞速发展，把计算机技术结合可编程序控制器技术应用于热泵干燥机是可行的、是大势所趋。
In the discrete distributed control system presented, each programmable logic controller is a control node and keeps communication with other nodes through network.
在所考虑的离散分布控制系统中，每个可编程控制器作为一个控制结点，结点之间通过网络进行连接保持通信。
This instrument is an electromechanical product, the programmable logic controller (PLC) is used for the control, and sensors are used for measuring the useful life of the parts detected.
该仪器为机电一体化产品，采用可编程序控制器控制，利用传感器判别被检部件是否失效及寿命长短。
And programmable logic controller (PLC) for control system, greatly simplifying the operation process, improve operational stability.
并将可编程序控制器(PLC)应用于控制系统中，极大的简化操作过程，提高运行稳定性。
This course is designed with PLC programmable logic controller to control the system.
本课程设计采用PLC可编程序控制器对该系统进行控制。
The principle and design method of the programmable logic controller (PLC) are introduced in brief. The design strategy of the PLC-based electric control system for ENN 2mn twisting machine is stated.
首先简要地说明了可编程序控制器(plc)的原理及其设计方法，然后提出了采用PLC的ENN2MN扭拧机电气控制系统的设计方案。
The principle and design method of the programmable logic controller (PLC) are introduced in brief. The design strategy of the PLC-based electric control system for ENN 2mn twisting machine is stated.
首先简要地说明了可编程序控制器(plc)的原理及其设计方法，然后提出了采用PLC的ENN2MN扭拧机电气控制系统的设计方案。
应用推荐