Humidifying technology is one of key technologies for proton exchange membrane fuel cell (PEMFC).
增湿技术是质子交换膜燃料电池(pemfc)的关键技术之一。
Proton Exchange Membrane (PEM) Fuel Cell is a clear and efficient new energy source.
质子交换膜(PEM)燃料电池是一种清洁高效的新型能源。
Based on the energy conversation of proton exchange membrane fuel cell (PEMFC) stack, the nonlinear temperature model of PEMFC stack with the large range of disturbances is developed.
基于质子交换膜燃料电池电堆的能量守恒，建立了在大范围的负载扰动下电池电堆温度的非线性模型。
This paper reviews the research progress in sulfonated polyimidesas materials for proton exchange membrane fuel cell.
综述了磺化聚酰亚胺作为质子交换膜燃料电池中膜材料的研究概况。
A new structure of static water removal for proton exchange membrane fuel cell (PEMFC) was designed.
设计了一种新型的质子交换膜燃料电池的静态排水结构。
Proton Exchange Membrane (PEM) is the key part in the Fuel Cell.
质子交换膜是燃料电池中的关键部件。
This paper introduced the principle of Proton Exchange Membrane Fuel Cell (PEMFC), and design the vehicle FC-engine system, at the same time, we have taken many practice.
分析了质子交换膜燃料电池的工作原理，提出了将其集成为车用发动机系统的设计方案，并且付诸了实践应用。
Aim at the response lagging of proton exchange membrane fuel cell electronic vehicle, which affects its commercialization.
针对质子膜燃料电池电动车响应速度较慢影响其商业化问题。
Output voltage of proton exchange membrane fuel cell was modeled for control design.
为了进行电池控制设计而为电池输出电压建立模型。
Thermodynamic and kinetic considerations for the ethanol electrooxidation in a proton exchange membrane fuel cell(PEMFC) were discussed.
从热力学和动力学角度讨论了质子交换膜燃料电池中的乙醇电氧化过程。
The optimal composition of catalyst layer in proton exchange membrane fuel cell (PEMFC) electrode was prepared through orthogonal method, which is called hydrophilic electrode.
利用正交实验设计法优选出质子交换膜燃料电池(PEMFC)电极催化层制备的最佳条件，即制备亲水电极。
From practical application, adaptive fuzzy identification and control models of proton exchange membrane fuel cell (PEMFC) were developed based on input-output sampled data and experts' experience.
从质子交换膜燃料电池(PEMFC)实际应用的角度出发，应用自适应模糊神经网络技术对PEMFC系统进行建模与控制。
The effects of fuel cell structures and operating condition on the performance of proton exchange membrane fuel cells are discussed.
讨论了电池结构参数和运行条件对质子交换膜燃料电池性能的影响。
A nonlinear predictive control algorithm based on fuzzy model was presented for a family of complex systems with severe nonlinearity such as of Proton exchange membrane fuel cell (PEMFC).
针对质子交换膜燃料电池(pemfc)等一类具有严重非线性的复杂被控对象，提出一种基于模糊模型的模糊预测算法，并对PEMFC系统进行建模。
This paper is to develop the economic and convenient hydrogen source from partial oxidation and steam reforming gasoline for the proton exchange membrane fuel cell (PEMFC).
本论文的目的是研制开发以汽油为原料的经济、方便的质子交换膜燃料电池(PEMFC)的氢源。
A dynamic model was developed to analyze the thermal management subsystem of a proton exchange membrane (PEM) fuel cell system.
该文分析了车用质子交换膜燃料电池系统热管理子系统的结构，并建立热管理子系统的动态模型。
Proton exchange membrane fuel cell (PEMFC) temperature had great influences on the generation performance of the stack.
质子交换膜燃料电池(PEMFC)温度对发电性能的影响很大。
A proton exchange membrane fuel cell stack was assembled.
组装了质子交换膜燃料电池堆。
The proton exchange membrane fuel cell (PEMFC) is one of the most promising power sources for future electric vehicles due to it's high power density and energy conversion efficient.
质子交换膜燃料电池（PEMFC）具有较高的功率密度和能量转化效率，最有可能成为电动汽车的动力源。
The practical significance of CO removal in methanol reformed gases for proton exchange membrane fuel cell (PEMFC) was introduced.
评述了质子交换膜燃料电池(pemfc)甲醇重整气中CO去除的现实意义。
The heat balance of proton exchange membrane fuel cell (PEMFC) was calculated; the heat transfer and comprehensive utilization (the combined heat and power technology of fuel cell) were elaborated.
对质子交换膜燃料电池(PEMFC)进行热量平衡计算，就热量的传递、综合利用，燃料电池热电联供技术，进行了阐述。
The price of proton exchange membrane fuel cell, for example, could be lowing down by developing new catalyst, solid polymer electrolyte and bipolar plate.
以质子交换膜燃料电池为例，必须通过减少用量或发现新材料而取代目前使用的催化剂、离子交换膜和双极板，才能大幅度降低电池的价格。
Perfluorinated resin solution is useful in proton exchange membrane fuel cell.
全氟磺酸树脂溶液在质子交换膜燃料电池和电化学中很有用途。
This paper reviews the research progress in sulfonated polyimides (SPI) as materials for proton exchange membrane fuel cell.
综述了磺化聚酰亚胺作为质子交换膜燃料电池中膜材料的研究概况。
Proton exchange membrane fuel cell (PEMFC) could be used as a very promising power source for electric vehicle (EV), though the demands were quite high for PEMFC, especially for its dynamics.
质子交换膜燃料电池（PEMFC）是很有前景的新型电动车动力电源，而电动汽车对动力电源的性能尤其是动态性能有较高要求。
The whole miniature portable proton exchange membrane fuel cell (PEMFC) system was designed and developed.
设计并制作了一种新结构的质子交换膜燃料电池(PEMFC)自增湿膜电极。
Proton Exchange Membrane fuel cell (PEMFC) is one of the most hopeful fuel cells in the energy application field.
甲醇质子交换燃料电池是未来最有希望获得工程应用的燃料电池。
Membrane electrode assembly (MEA) is the central portion of proton exchange membrane fuel cell (PEMFC).
膜电极(MEA)是质子交换膜燃料电池(pemfc)的核心技术。
Variously existing mathematical models of proton exchange membrane fuel cell (PEMFC) were introduced and sorted by their structures and working mechanisms.
介绍了质子交换膜燃料电池(PEMFC)至今已有的各种数学模型。根据PEMFC的组成结构、工作原理进行了模型分类。
The performance of Bipolar Plate directly affects the reliability, stability and longevity of proton exchange membrane fuel cell (PEMFC).
双极板性能的优劣直接影响着质子交换膜燃料电池(pemfc)的可靠性、稳定性和寿命。
应用推荐