The calculation of flexural strength of reinforced concrete members in Code for Design of Concrete Structures (GB50010-2002) is the equivalent rectangle method based on the plane section assumption.
现行《混凝土结构设计规范》（GB50010-2002）中正截面承载力的计算方法是基于平截面假定的等效矩形计算方法。
A method to construct a golden rectangle.
一种构造黄金矩形的方法。
We want to write a class Rectangle, which has width and height as its data and a method area that computes the area.
我们要来定义一个带有带有高和宽的矩形，并且要提供一个计算其面积的area方法。
The start method creates the translucent rectangle and passes it to another object called a dragger.
start方法创建这个透明矩形并将其传递给另一个称为 dragger 的对象。
Finally, the done method, seen in Listing 7, removes the translucent rectangle, because the drag-and-drop process is now over.
最后，done方法(参见清单7)删除这个透明矩形，因为拖放过程现在已经结束。
It is calculating the area in one method, and it is returning a GUI representation of the rectangle in another method. This leads to some interesting problems.
在一个方法里它计算了面积，在另外一个方法了它返回一个表示矩形的GUI。
This paper gives a calculating method of the error of rectangle spline hob profile designed on the theory of plane engagement, with the errors of some hobs calculated.
此文给出了按平面啮合原理设计矩形花键滚刀齿形的误差计算方法，并计算了几种规格的滚刀的齿形误差。
But this is not object-oriented in its strict sense. A better approach would be to invoke a method on the Rectangle object rather than passing the object to a function.
但是这样做就不是一个严格意义上的面向对象了。
On this foundation, one simple supported rectangle steel beam model is presented as calculated example for the above-mentioned method application.
在此基础上，以简支矩形截面钢梁损伤识别为例，进行了实例应用研究。
This method scales the image as needed to make it fit in the specified rectangle.
这个方法将会缩放图形来适应指定的矩形。
This paper describes the application of finite element method for obtaining the TE mode′s cutoff wavelength and the field pattern of symmetric quadruple-ridged rectangle waveguide.
应用有限元分析方法计算了对称四脊矩形波导TE模式的传输特性，即截止波长和场结构图传输特性。
The hydrodynamic lubrication performance of rectangle, inclined plane, circular-arc, triangle, multi-arc and sine surface texture was researched with CFD method based on N-S equation.
采用基于N - S方程的CFD方法，研究矩形、斜面台阶形、圆弧形、三角形、多圆弧形以及正弦形织构表面的动压润滑性能。
Based on basic theory of maximum error minimum method, double arc parameters for normal tooth outline in rectangle spline hob are optimized to obtain tooth outline in workpiece with minimum error.
根据最大误差最小法的基本原埋，对矩形花键滚刀法向齿形的双圆弧参数进行了优化，使滚刀加工出的工件齿形误差最小。
One method about irregular shapes is approximately rectangle solution method based on regular shapes packing, the other method is to deal with the irregular shapes directly.
对不规则件的处理基本上是基于规则零件排样处理的矩形近似方法和对不规则零件直接处理两种方法。
This paper studies a calculation method for earth resistance of a single vertical steel rodin rectangle concrete of uniform dielectric.
对均匀介质中矩形混凝土竖直单根钢筋接地体的基础接地电阻的计算方法进行了研究。
The PDF method has been applied to investigate the premixed turbulent reactive flows past bluff-body in a rectangle combustor.
本文采用PDF方法对矩形燃烧室内钝体后的湍流预混火焰进行了数值模拟。
A method to calculate the section curvature ductility index of high strength concrete shear wall is induced by using stress-strain relationship of rectangle stirrup and plane section assumption.
利用矩形箍筋约束混凝土的应力一应变关系和平截面假定，建立了高强混凝土剪力墙截面曲率延性系数的计算方法。
First, the integral equation of an infinite phased array of rectangle waveguide with rectangle grid was deduced and its solution by moment method was presented either.
该文采用积分方程法及模式匹配法对矩形波导单元无限相控阵进行了分析与设计。
While profile, the cross section was composed of annulus and rectangle, was extruded, the flow mechanism the plastic melt in the die was analyzed and the design method of die land was given.
本文分析了异型(圆环型与矩形的组合)材成型时塑料熔体在模头中的流动机理，并给出了模口成型长度的设计方法。
The blank design method for ring with rectangle cross section is derived based on the ring rolling theory and practical experience.
基于环件轧制理论和实践经验，提出了矩形截面环件和外台阶截面环件的毛坯设计新方法，给出了具体的毛坯设计方案。
Based on the method, a calculation of two dimensions for a rectangle container has been carried out.
按照此方法对二维矩形容器问题进行了实际计算。
In this paper, the method of matrix analysis is used to the cross section of rectangle open caisson structure of the variable thickness, and exact results are worked out.
用矩阵分析的方法对变厚度矩形沉井结构横断面进行受力分析，求出了精确解。
The method Transform was originally written to deal with instances of the Rectangle class, and it does its job quite well.
变换最初编写方法对付矩形类的实例，它做得很好。
In this paper, ideal rectangle and Gaussian shape pulse act as radar echo signal model. Through simulation research, application of NMTI method in wideband radar systems is discussed in detail.
该文分别以理想矩形和高斯钟形脉冲作为雷达回波信号模型，通过仿真研究，详细讨论了NMTI方法在宽带雷达中的应用。
In this paper, a direct method for static voltage collapse point in rectangle coordinate is presented.
本文提出了在直角坐标系下静态电压稳定临界点的一种直接计算方法。
Calculation method of reinforced concrete isosceles trapezoid slab is experiential arithmetic which simplified isosceles trapezoid into rectangle slab to calculate.
在均布荷载作用下，对钢筋混凝土周边固支等腰梯形板的计算通常都是将其简化成周边固支当量矩形板进行计算。
Chapter 3, analyzes the traditional rectangle envelope method, points out its deficiency, which will result in plenty of wastes.
第三章，先对传统的矩形包络法进行了分析，并指出其中的不足，即会造成大量的原料浪费。
The method is qualified for measurement of groove depth and duty cycle simultaneously for the rectangle-shaped or similar profile of holographic grating mask.
对于要求同时检测矩形或接近矩形槽形的全息光刻胶光栅掩模的槽深和占宽比，该方法完全适用。
The method of extended ESO is improved in the aspect of design domain, which is extended from rectangle design domain to free boundary design domain.
将原来的改进进化论方法进行适当的拓展，即将原来的矩形设计域改变成自由边界设计域。
The method of extended ESO is improved in the aspect of design domain, which is extended from rectangle design domain to free boundary design domain.
将原来的改进进化论方法进行适当的拓展，即将原来的矩形设计域改变成自由边界设计域。
应用推荐