Product Notes: single-stage regulator valve for the high pot.
产品备注:为单段调节气阀高速锅。
Regulator valve and return to heat pipe will solve this problem.
稳压阀和回热管将解决这一问题。
Jiangyin City Oulei si will be your The best regulator valve repair business!
江阴市欧雷斯将是您最佳的调节阀维修商!
It also allows you to adjust the output pressure using an included gas-regulator valve.
它还允许您调整输出压力使用包括气体调节阀。
Whenever the oil pressure exceeds the maximum pressure, the regulator valve opens to reduce the pressure.
每当油压力超出最大压力时,打开调节阀,以减少压力。
Design study carried out 5 times and was informed that the regulator valve to control the client and output pressure ratio should be below 3.
进行5次设计研究,得知稳压阀的控制端和输出端压力比应在3以下。
The system employs the variable speed regulation of electrically driven feed pump and the regulator valve to fulfill the control of water level.
该系统采用电动给水泵变速调节和调节阀共同完成水位控制。
The United States VTON Granville shield imported pneumatic multi-stage step-down regulator valve, using the sleeve guide, pressure balanced valve.
美国VTON威盾进口气动多级式降压调节阀,采用套筒导向,压力平衡式阀芯。
Jiangyin City Oulei si professional regulator valve regulating valve repair technologies and equipment maintenance and application of research and development.
江阴市欧雷斯专业从事调节阀修理技术与调节阀维修设备的研究开发与应用。
Several kinds of shutdown valves were compared. Then it focused on the features and related concepts of the regulator valve. It can be referenced for the selection of valves in HVAC system.
比较了几种常见的关断作用阀:重点介绍了调节作用阀的相关概念及特性,可为暖通空调系统中阀门的选择提供参考。
Main structured items are: JDQM full face mask, air supply valve, pressure regulator valve, backboard, pressure gauge, alarming whistle, medium pressure tube, carbon fiber composite cylinder, etc.
主要结构有:JDQM全面罩、供气阀、减压阀、背板、压力表、报警哨、中压管、碳纤维复合气瓶等。
Close the shutoff valve upstream of the regulator.
关闭调节阀上游的关断阀。
Install the Watts regulator in the supply line to the boiler with the arrow on the valve body pointing in the direction of flow to the boiler.
在锅炉的供水管道上安装美国瓦茨调节阀,将调节阀阀体上的箭头指向锅炉的水流方向。
Use a pressure reducing regulator or separate control valve to safely discharge gas from cylinders. Use a check valve to prevent reverse flow into the cylinder.
使用减压调整器或单个的控制阀来安全地从钢瓶中排出气体。采用止回阀,防止回流入钢瓶。
Pressure gauge, valve, pressure regulator for panel mounting.
压力表、阀、压力调节器均为面板安装。
Oxygen flows through the pressure reducing regulator and shut off valve to the masks.
氧气通过减压调节器和关断活门流向氧气面罩。
The Model 1600a precision vacuum regulator features control sensitivity of 1 water column and a balanced supply valve for high precision.
示范1600a精密真空调节器控制1敏感性水柱和高精度供求平衡的阀门。
This output can be modified by operating the special regulator incorporated in the valve (see the last pages for a description of how to regulate the valves).
气体输出量可以通过调节电磁阀上特殊调节器操作。
In front of the feed water regulator, split, economizer, superheater export, between superheater outlet and main steam valve, to heat the import and export, all should be installed pressure gauge.
在给水调节阀前、可分式省煤器出口、过热器出口、过热器出口与主汽阀之间,再热气进出口、都应装设压力表。
The T&P valve shall be a Watts Regulator Company Series 40, 140, 240 or 340.
这些温度压力安全阀应该是美国瓦茨公司系列40, 140, 240或340温度压力安全阀。
Tube, Tube fitting valve, Regulator, Gage.
管件,管件阀门,调节器,计量器;
Install a shutoff valve upstream of the regulator.
在调节阀上游安装一个关断阀。
If uneven pressure should cause the regulator to pulsate, its action can be stabilized by throttling the valve.
如果不稳定的压力导致调节阀波动,则这种波动通过对阀门节流将稳定下来。
Each gas regulator includes a sealable valve that defines an input and an output, with each valve including a piston having a cylinder and a rod.
每个气体调节器包括可密封阀,所述阀限定输入和输出,且每个阀包括具有活塞缸和活塞杆的活塞。
Solenoid valve, hand wheel, valve position switch, air filter regulator and so on.
电磁阀、手轮机构、阀位开关、空气过滤减压器等。
Equipped with flow regulator in system, electro-hydraulic proportional speed regulating valve can decrease leveling time in high speed gear, and ensure leveling accuracy in low speed gear.
系统中设有流量调节环节,电液比例调速阀在快挡可以缩短整个调平时间,在慢挡可以保证调平精度。
With the regulator adjusting knob turned fully counterclockwise, place both hands on the cylinder valve and open it slowly, allowing the pressure to rise gradually in the regulator.
调整器的调节钮逆时针旋死后,两只手放在钢瓶阀门上,慢慢地开启,使调整器内的压力逐渐增加。
At the end of the shift or work day, close the cylinder valve and bleed the pressure off the regulator and torch equipment.
在下班或工作日结束的时候,关闭钢瓶阀门,放出调整器和吹管设备内的压力。
At the end of the shift or work day, close the cylinder valve and bleed the pressure off the regulator and torch equipment.
在下班或工作日结束的时候,关闭钢瓶阀门,放出调整器和吹管设备内的压力。
应用推荐