China Auto Repair welding the first brand!
中国汽修焊机第一品牌！
Also suitable for repair welding of cast bronzes.
很适合于修理铜铸件。
For repair welding on general grey cast iron weldment.
用于强度要求不高的灰口铸铁件的焊补。
Detailed description is done on repair welding technology.
对补焊工艺作了详细说明。
Mainly used for various hardened iron blade repair welding.
主要用于各种淬火后铸铁的刃口修补焊接。
For repair welding of grey cast iron which requires less strength.
用于球墨铸铁、高强度铸铁件加工面和非加工面的补焊。
The vibrating mechanism of surfacing for repair welding of shaft is developed;
设计了用轴类零件修复的频率和振幅均可调的振堆焊机构。
The repair welding technology and inspecting method after welding are mainly discussed.
重点讨论了补焊工艺及焊后检查方法。
This paper deals with the procedures, steps and precautions for repair welding of the bucket rod and the rack.
文章介绍了斗杆、齿条焊修的程序、步骤和注意事项。
The repair welding of TA15 titanium alloy with flux is a mending method which can obtain high quality repairing bead.
采用活性剂对钛合金可以进行多次补焊并能够获得高质量焊缝。
A new procedure for repair welding of white cast iron roller is presented and analysis is carried out to the results.
介绍了白口铸铁轧辊焊接修复新工艺，并对其结果进行了分析。
The old roller machine to use for half a year would need to open the repair, replacement or repair welding roller body.
而旧型对辊机使用半年就需拆开大修、更换辊体或进行补焊。
Copper nickel, good machinability bad crack resistance. Repair welding of shole gray cast iron machined surface subject to no load.
镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊。
The causes of resulting in the cracks are discussed and the proper techniques of repair welding the cracks are presented in this paper.
本文就裂纹产生的原因和如何正确安排焊补工艺进行讨论。
Iron nickel high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron such as cylinder cap.
镍铁，强度高、塑性好。重要灰铸铁及球铁焊补用，如汽缸盖。
Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.
镍铁，强度高、塑性好。重要灰铸铁及球铁焊补用，如汽缸盖。
Copper nickel good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊。
The invention realizes preheating before repair welding, and the strength of a repair welding joint is more than that of the deposited metals.
本发明实现了补焊前的预热，补焊接头强度大于熔敷金属自身的强度。
Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.
镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊。
The quality of computer spring machine rotor imbalance can repair welding, riveting, cementing way to add with computer spring machine quality;
对电脑弹簧机旋转体的不平衡质量可以用补焊、铆接、胶结等方法来加配电脑弹簧机质量；
Pure nickel, excellent general properties. Used to weld thin cast iron part repair welding machined surface, such as guided way of machine tool.
纯镍，综合性能好。铸铁薄件及加工面补焊用，如机床导卫。
The article introduces a repair welding technology which prevents the worn axis from residual deformation and assures the repaired axis normally running.
介绍了一种防止磨损轴在焊补过程中出现残余变形，以保证修复轴正常运转的轴磨损无变形焊补工艺。
WC-cored electrode is a repair welding electrode with high hardness and high wear resistance, which has been widely used in circumstance with violent wear.
WC型管状焊条是一种高硬度、高耐磨性的堆焊焊条，广泛用于强烈磨损的零件上。
At present, it's widely used in the production of steel made furniture, stainless products, theft-proof door, kitchen fitting AD repair welding of wire lath.
目前广泛用于钢制家具，不锈钢制品，防盗门生产，厨房设备及钢丝网片补焊等。
By comparison with manual arc welding, it is found that the thermit welding is a efficiency, energy saving and high quality process for repair welding of steel ingot die.
根据对比铝热焊与手弧焊修复工艺，阐明了用铝热焊修复钢锭模是一种高效、节能、焊接质量好的新方法。
Particularly suitable for repair welding of bronze statues. For multilayer welding on steels, pulsed arc welding is recommended. For large work pieces preheating is recommended.
特别适合铜雕像修复的焊接，建议在钢材多层焊时使用脉冲电弧焊，用于大焊件时建议预热。
The selections of repair welding technology are compared, and the repair welding technology using handwork gas tungsten arc welding is detailed. The result with good effect is got.
对补焊工艺方法的选择作了比较，具体阐明了采用手工钨极氩弧焊的补焊工艺方法，实践证明，效果良好。
Repair measures of large reducer with housing cracking are introduced by examples. Analysis is carried out on weldability. Detailed description is done on repair welding technology.
结合实例介绍了箱体断裂的大型减速机的修复措施。对可焊性进行了分析；对补焊工艺作了详细说明。
This paper introduces the repair welding procedure for repairing an alumal casting piece of an oil pump cylinder, This method covers the shortages of AC argon arc weld and gas welding.
介绍了对油泵机缸体铝锰合金铸造件缺陷补焊修复的技术工艺，且弥补了若采用交流氩弧焊和气焊施焊时存在的不足。
The repair welding method comprises the following steps: firstly, preparing a protectant for repair welding and deposited metals according to material compositions of a large forged piece;
本发明的补焊方法，包括以下步骤：首先根据大型锻件的材质成分，制备补焊用保护剂和熔敷金属；
应用推荐