The formulation design, processing characteristic and material choice of winding without filling in epoxy resin cast dry-type transformer are introduced. The warnings in cast process are presented.
介绍了环氧树脂浇注干式变压器无填料绕组浇注的工艺特点、材料的选择和配方设计，提出了浇注过程中应注意的事项。
The performance of the resin latex film was not only dependent on its formulation and the molecular chain structure of the polymer inside, but also the film formation process of the polymer.
树脂乳胶膜的性能不仅与涂料的配方和其中聚合物的分子链结构有关，而且与聚合物的成膜过程密切相关。
Find out the better formulation of the matrix resin and good processing technology.
找出了较好的基体树脂配方和良好的施工工艺。
The preparation of resin for waterborne over-rust corrosion protective coatings and formulation of the coatings has been described.
介绍了水性带锈防腐涂料用树脂的合成方法及水性带锈防腐涂料的配制方法。
Resin synthesis, Paint formulation and paint performance are introduced. This paint had been used on passenger train for two years. The result of application is disclosed.
简述厚浆环氧酯防锈涂料的配方设计、树脂合成以及涂料性能。并且介绍了厚浆防锈涂料用于铁路客车运行两年后的情况。
This paper studied the raw material selection and formulation design of the alkaline batteries conductive antisepsis coatings. The selection and dosage of resin is important.
研究了碱性电池导电防腐涂料中原材料的选择、配方的设计，其中树脂的选择和用量至关重要。
The formulation and manufacturing process of hydroxyl acrylic resin and polyester oligomer were given.
介绍了羟基丙烯酸树脂、聚酯齐聚物的配方和制法。
This paper introduces the formulation and technique of glass fiber reinforced polyarylester resin (GFRPAR).
介绍玻璃纤维增强聚芳酯（GFR PAR）树脂的配方、工艺。
A formulation based on nontoxic silicate as antifouling agent and acrylic resin as binder was given.
本文介绍了以无毒硅酸盐为主要防污剂、丙烯酸树脂为基料的无毒防污涂料的配方。
The formulation and production process of this coatings were given, and factors influencing the film properties, such as level of urea - formaldehyde resin and acid curing catalyst were discussed.
介绍了该涂料的配方和配制工艺。讨论了脲醛树脂用量和酸固化催化剂对涂膜性能的影响。
The formulation design, manufacture process and product performances of the resin and coatings thereof are introduced.
介绍了该树脂及涂料的配方设计、生产工艺和产品性能。
The formulation and performance of a kind of new environmentally friendly water-dispersed epoxy resin paint are introduced.
介绍了一种新型环保改性水分散型环氧树脂涂料的配方及性能。
This paper studied the thermosetting acrylic resin with high solid and low viscosity in terms of its formulation, performance and the influential factors upon resin-polymerization.
研究了高固体分、低粘度热固性丙烯酸树脂的配方和性能，影响树脂合成的因素。
Hot melting road-marking resin is produced with gum rosin and other raw materials by our special formulation and proceeding, which is specially used for road-marking paints.
热熔性道路标线涂料树脂是应用独特的配方和工艺流程，由脂松香及其它原料改性而成的一种专用于道路标线涂料的树脂。
The better formulation of visible light-curing adhesive and composite resin were obtained through orthogonal experiment.
通过正交实验获得了可见光固化胶粘剂及复合树脂的较佳配比。
Proper selection of the resin, pigments and fillers and additives, Especially, a special additive T and formulation lead to the average reflectance ratio is up to 80.
通过所用树脂、颜填料和助剂的选择和搭配，尤其针对本研究体系的特殊性，采用了一种特种助剂T，使研制的涂层在可见-近红外波段的反射比达到80。
This paper introduced the preparation of a new corrosion resistant unsaturated polyester resin from PET waste. The formulation and reaction temperature were defined.
介绍了用PET废料制备新型耐腐蚀不饱和树脂工艺，确定了配料及反应温度。
Formulation, process conditions, curing time and flow behavior of phenolic resin for injection molding with excellent flowability and fast-curing characteristic were described.
介绍了一种高流动性快速固化酚醛注塑料的配方、制备工艺及其成型时间和流动特性。
The polysiloxane glue in the formulation may be replaced by commercial silicone oil, silicone rubber and silicone resin for improved high temperature performance in the air.
也可用各种商品的硅油、硅橡胶和硅树脂代替本配方的聚硅氧烷胶料从而提高它们在空气中的耐高温性能。
The polysiloxane glue in the formulation may be replaced by commercial silicone oil, silicone rubber and silicone resin for improved high temperature performance in the air.
也可用各种商品的硅油、硅橡胶和硅树脂代替本配方的聚硅氧烷胶料从而提高它们在空气中的耐高温性能。
应用推荐