The impeller material, in addition to considering the centrifugal force under the action of mechanical strength, but also consider the material resistance to wear and corrosion resistant performance.
选择叶轮材料时，除了要考虑离心力作用下的机械强度以外，还要考虑材料的耐磨和耐腐蚀性能。
Some high chromium steels can be hardened by heat treatment and are used where resistance to wear, abrasion, and corrosion are required.
一些高铬钢能通过热处理硬化，可用于抗磨坏，抗磨损，抗腐蚀需求的地方。
While its disadvantages of low hardness, low wear resistance and easy to occur inter crystal corrosion affect its application ranges and life-span.
但铝和铝合金硬度低、不耐磨、易发生晶间腐蚀，这些缺点影响了其应用范围和使用寿命。
Due to dense structure, high tensile strength, excellent wear-ability, anti-crack and corrosion resistance against acid and alkali, it can be used as integral anti-corrosion coat and block coat.
由于其结构致密，具有较高的抗拉强度且耐磨、抗裂、抗酸碱腐蚀性能优异，宜用于防腐蚀整体面层和块材面层的铺砌材料。
Different according to the medium, its temperature, corrosion and wear resistance are also different levels of requirements.
根据输送介质的不同，对其耐温、耐腐蚀和耐磨性能也有不同程度的要求。
Surface modification can be used to improve wear-corrosion resistance and biocompatibility of titanium alloy implants in body.
在生物医学领域中，表面改性可以改善钛植入体的耐磨性、抗蚀性和生物相容性。
Engineering ceramics feature resistance to high temperature, corrosion, wear and hot impact.
工程陶瓷材料具有耐高温、耐腐蚀、抗磨损及抗热冲击等优点。
The hardness, Young's modulus, wear resistance, and corrosion resistance of the coating are higher due to the recombination action of amorphous and inter-metallic compounds.
在非晶相和金属间化合物复合作用下，复合涂层具有高的硬度、弹性模量、耐磨性和耐蚀性。
Adapt to a wide range of its products with high strength, low elongation, wear resistance, corrosion resistance, smooth, soft and easy to operate and so on.
其产品适应范围广，具有强力高，伸长低，抗耐磨，耐腐蚀，光滑柔软，便于操作等优点。
The results showed that the addition of oxidizing gas as well as later stage oxidizing and salt bath processing were beneficial to increase the wear resistance and corrosion resistance.
试验结果表明添加氧化气及进行后期氧化盐浴处理均有利于耐磨性和抗蚀性能的提高。
Titanium nitride coating has great application in industry owing to its superior properties, such as good wear and corrosion resistance, low friction coefficient and good thermal barrier properties.
氮化钛涂层因具有良好的耐蚀性、耐磨性及低的摩擦系数在工业上得到广泛应用。
Results show that iron tungsten alloy deposit obtained is similar to chromium deposit in appearance, and has good resistance to corrosion, heat and wear.
所得镀层外观与铬镀层相近，具有良好的耐蚀、耐热和耐磨性能。
Magnesium alloys are promising structural materials because of their lightweight. However the wide application of magnesium alloys is limited due to inferior corrosion and wear resistance.
镁合金是一种极具发展潜力的轻质结构材料，但镁合金的耐蚀、耐磨性较差成为阻碍镁合金推广应用的重要问题。
So proper surface modification to improve the corrosion and wear resistance of magnesium alloys is of great importance.
表面处理是提高镁合金耐蚀、耐磨性能的重要途径。
SEM (scanning electronic microscope) was adopted to observe the morphologies of the oxidized alloys. The wear resistance and corrosion resistance property were assessed.
采用扫描电子显微镜对膜层进行了形貌分析，并对氧化处理前后样品的耐磨性和耐蚀性进行了测试分析。
A method for treating a substrate (such as the gears of a gear set) to provide the substrate with both wear protection and corrosion resistance is disclosed.
公开一种向基材提供防磨损和耐蚀性能的基材(例如齿轮组中的齿轮)处理方法。
This review details the state of corrosion mechanism of the magnesium alloy and surface modification technologies applied to improve its corrosion and wear resistance.
综述了镁及其合金的腐蚀原理和表面氧化技术的研究现状。
Powder plasma-arc surfacing, as one of the surface modification processes, is utilized widely to increase the wear and corrosion resistance on the surface of components.
粉末等离子弧堆焊技术作为表面强化技术手段之一，可显著提高零部件表面耐磨损耐腐蚀性能。
With good wear resistance and corrosion resistance, micro-cracks criss-cross network to strengthen the film's adhesion.
纵横交错的微裂纹网络，增强油膜的附着能力。
With good wear resistance and corrosion resistance, micro-cracks criss-cross network to strengthen the film's adhesion.
纵横交错的微裂纹网络，增强油膜的附着能力。
应用推荐