The proposing value of service life of design was 50 of rubber bearing.
橡胶支座的设计使用寿命建议值为50年。
High damping rubber bearing is starting to be used in bridge engineering in China.
目前高阻尼橡胶支座在国内桥梁工程建设中使用尚处于起步阶段。
The nonlinear earthquake response of large-scale aqueduct with the lead rubber bearing is studied.
开展对设置铅芯橡胶支座的大型渡槽非线性地震响应研究。
With special raw material (raw rubber bearing) and small friction coefficient; electricity -saving.
含特殊原料原橡胶轴承，摩擦系数小，更省电。
The development of the software is very helpful to the popularization of the rubber bearing isolation tec...
该软件的研制成功对橡胶垫隔震技术的广泛推广起着良好的促进作用。
The development of the software is very helpful to the popularization of the rubber bearing isolation technology.
该软件的研制成功对橡胶垫隔震技术的广泛推广起着良好的促进作用。
Under earthquake, the sway movement of lead-rubber bearing base-isolated structure with soft soil base is more obvious.
地震作用下软土地基—铅芯橡胶支座隔震结构的摇摆运动较明显。
Therefore, the main topic of this study is to dealing with the seismic behaviors of the skew bridge with rubber bearing.
本文主旨为探讨装设橡胶支承垫之斜桥，在地震作用下的行为反应。
In this paper, by considering the contact between hollow slab and rubber bearing to study the stress concentration issue.
本文通过考虑橡胶支座与板端底面之间的接触问题来研究板端应力集中现象。
This article describes the improved shear modulus can increase the profiled rubber bearing, and puts forward a new bearing.
本文介绍了改进后能提高抗剪弹性模量的异型板式橡胶支座，并在此基础上提出新型支座。
In this paper, a new aseismic rubber bearing, which was developed recently by the authors, and its properties are described.
本文简要介绍了作者最近研制的新型减震橡胶支座及其滞回阻尼性能。
In this paper, smart base isolation system consisting of rubber bearing and MR damper is applied to structural vibration control.
本文将磁流变(MR)阻尼器与普通橡胶隔震支座相结合，组成智能基础隔震系统应用到结构控制中。
The rubber bearing base isolation as one of the effective control of damping systems has been widely used in the actual projects.
橡胶垫基础隔震技术作为一种有效的减震控制之一，在实际工程中得到了广泛的运用。
This paper develops a type of finite element model of rubber bearing to analyze the simulator of rubber bearing in storey isolated structure.
如何模拟单元之间的隔震垫是层间隔震结构有限元分析的关键。
Slowly parameter, nonlinear time response analysis and energy approach can be used to obtain the dynamic behavior of lead rubber bearing (LRB).
利用慢变参数、时程分析和能量分析方法，探讨了铅芯橡胶减震支座（LRB） 的非线性动力性态。
The results show that the seismic response of curved beam bridge and the influence of curvature radius can be reduced by using lead rubber bearing.
结果表明：铅芯橡胶支座不仅可以有效地降低曲线梁桥的地震响应，还有助于减少曲率半径对曲线梁桥地震响应的影响。
In order to improve the effect of shock absorption and applied scope of base - isolated structure with lead rubber bearing and study its optimum parameter.
目的为改善铅芯橡胶支座隔震结构的减震效果和适用范围，并确定结构的优化参数和控制装置优化布局。
It shows non-linear TMD damping-isolation technology in the super high-rise structure on the basis of research results of rubber bearing and tuned mass damper.
结合橡胶支座基础隔震和调谐质量阻尼器的研究成果，提出了在超高层结构中应用非线性＂调谐质量阻尼器＂的减震技术。
The deflection of double-pitch hipped-plate grid structure increased significantly after earthquake, and the part of anchor bolts of rubber bearing were cut off.
某双坡折板式网架结构在地震作用下出现结构挠度大幅度增加、部分橡胶支座锚栓被剪断的破坏特征。
Using ABAQUS to build the finite element model of reinforced concrete hollow slab and rubber bearing, simulate contact effect between them by set contact property.
运用有限元软件ABAQUS建立钢筋混凝土桥面板与橡胶支座的有限元模型，设置接触属性来模拟二者之间的接触作用。
When the basement is on fire, such as the role of convection, radiation will make laminated rubber bearing at a high temperature environment with the increasing temperature.
当地下室发生火灾时，随着温度的升高，对流、辐射等作用会使叠层橡胶支座处在一个高温的环境中。
Kinematic model is an issue exists in suspension rigid body does not take into account the deformation of the deformation of rubber bearing gap between the various structures.
运动学模型中存在的一个问题是未考虑悬架刚体的变形、橡胶支承的变形及各结构之间的间隙。
It is also found that there exists a maximum isolation period, at which, the limit ratio is zero or the horizontal displacement of the rubber bearing exceeds the allowable value.
研究还发现，存在一个最大的隔震结构周期使高宽比限值等于零或隔震层位移超过容许值。
It is also found that there exists a maximum isolated structure period at which the height width ratio is zero or the displacement of the rubber bearing exceeds the allowable value.
研究还发现，存在一个最大的隔震结构周期使高宽比限值等于零或隔震层位移超过容许值。
In this paper, using ANSYS software, establish the three-dimensional solid model of laminated rubber bearing, take advantage of changes in model parameters to simulate the bearing damage.
本文利用ANSYS有限元计算软件，建立了板式橡胶支座的三维实体模型，讨论了利用模型单元参数的改变来模拟橡胶支座受损的可行性。
The serial isolation system consisting of laminated rubber bearing and R/C column has been applied in practical building, but without the corresponding codes for calculation and design yet.
将叠层橡胶支座和R／C柱的串联机构作为隔震系统的做法在实际工程中已有应用，但至今尚无规范化的设计计算方法。
In this paper, based on the simplified analysis and dynamic tests, the problems related to the stability of laminated rubber bearing in the design of seismic-isolated buildings are discussed.
文章基于简化分析和动力实验，讨论了在隔震建筑设计中与叠层橡胶支座稳定性相关的问题。
In this paper, the seismic isolation technique is used in seismic-releasing of the single-storey industrial building by use of laminated rubber bearing as link member between roof and column.
结合单层工业厂房的构造特点，将夹层橡胶垫隔震技术引入到单层工业厂房的设计中，并探讨了橡胶垫的减震效果和减震机理。
The text main study is a non_metallic guide bearing of turbine instead of the rubber one here.
本文着重研究的是一种替代橡胶轴承的非金属水轮机导轴承。
Function description: quicken the cooling of rubber mould; shorten the interval time of using the mould (increase the output); reduce the high-temperature bearing time (lengthen the service life).
功能描述：加快橡胶模具的冷却、减少模具再次使用的间隔时间(提高产量)、减少高温承受时间(使用寿命更长)。
应用推荐