Changes in the spring performance will directly affect the mechanical seal face pressure.
弹簧性能的发生变化将会直接影响机械密封端面比压。
It is of built-in type, double seal face, multi-spring, unbalanced type and drive sleeve transmission.
内装式、双端面、多弹簧、非平衡型、传动套传动。
Double seals: Material code for the secondary seal is directly followed by the product seal face codes.
注：双端面机械密封的型号表示方法为：在产品型号规格的后面书写两组材料代号，用横线相连。
ANSI flange sealing principle is very simple: bolt two seal face mutual extruding flange gaskets and formed the seal.
ANSI法兰的密封原理极其简单：螺栓的两个密封面相互挤压法兰垫片并形成密封。
Compared with any other processing methods, laser technology is a unique way to produce micro-pores on the seal face.
对各种加工方法进行比较可知，在机械密封端面上加工微孔，激光表面处理技术是惟一有效的加工方法。
Have resolved the leakage problem through improving quality of seal face, adding diameter of O-ring and other measures.
通过提高密封表面的质量、增加O型圈的直径等措施，解决了渗漏问题。
Mechanical seal type XM31A has a single seal face and multi-spring unbalanced structure, and is driven by screw transmission.
XM31A型机械密封为单端面、多弹簧非平衡型结构。采用传动螺钉传动。
Seal face geometry parameters can be optimized by analyzing regulation of their effect on opening force and liquid film stiffness.
通过分析端面结构参数对密封开启力和液膜刚度的影响规律，可得到端面结构的优化参数。
The parametric study demonstrates that substantial hydrostatic pressure can be produced on the seal face with partial micro-pores.
研究表明在部分密封端面上加工微孔可有效增大端面静压。
Impeller with against pine device, Mechanical seal face material USES silicon carbide - silicon carbide, durable, safe and reliable.
叶轮具有防松装置，机械密封端面材质采用碳化硅-碳化硅，经久耐用、安全可靠。
The inner mechanical seal shall be constructed with a solid block carbon rotating seal face and a solid block silicon carbide stationary seal face.
内置的机械密封结构应该采用一块整体结晶碳旋转密封面和一块整体结晶碳化硅固定密封面。
The outer mechanical seal shall be constructed with a solid block silicon carbide rotating seal face and a solid block silicon carbide stationary seal face.
内置的机械密封结构应该采用一块整体结晶碳旋转密封面和一块整体结晶碳化硅固定密封面。
So the means cannot control leak the material, then possibly is the graphite pad or the copper collar wears (for example seal face not to be smooth seriously, gap big).
如此办法不能控制漏料，则可能是石墨垫或铜环磨损较严重(如密封端面不光滑，间隙大)。
Mechanical seal: seal face, gasket and shaft seal, etc parts must be undamaged, otherwise will result in over leakage, sure to change parts with wear and tear or damage.
机械密封：密封面、密封垫及轴封等元件必须完好，否则将导致过度泄漏，对有磨损或损伤的元件必须更换。
The result of transient state analysis indicated the thermal-mechanical effect on seal face during loading, the seal surface parameter dropped steadily during unloading.
理想瞬态分析实例表明，加载过程中密封端面产生热机效应，稳定减载过程中端面参数平稳下降。
The seal is processed in the high tech, which makes the hardness of seal face up to HRC57-60. It is endurable in high temperature, resistant in abrasion and antifriction.
采用高科技手段加工“密封副”，使密封面的硬度高达HRC57 - 60，具有耐高温、耐腐蚀、耐磨损等特性。
It is of built-in type, single seal face, single spring and unbalanced type with hook spring transmission, and the direction of rotation of spring depending on that of axis.
内装式、单端面、单弹簧、非平衡型，带钩弹簧传动，弹簧旋向与轴旋向有关。
Many studies were carried on the technologies and properties of laser cladding on the seal face of valve, but lack of contrast data with plasma spraying Alloy applied at present.
气门密封面激光熔覆的工艺和性能研究较多，但激光熔覆的合金组织和性能与现在气门密封面生产应用的等离子喷焊合金的对比数据较少。
The calculation results show that the pressure distribution shape is a convex parabola and the increase of the radial taper of the seal face can decrease the friction coefficient.
计算结果表明，机械密封端面压力分布呈凸抛物线状，增加密封端面锥度可降低摩擦系数。
For motor frame size 180 and above, the inner mechanical seal shall be constructed with a solid block carbon rotating seal face and a solid block silicon carbide stationary seal face.
用于尺寸180以上的电机机架，内置的机械密封结构应该采用一块整体结晶碳旋转密封面和一块整体结晶碳化硅固定密封面。
The main contents and achievements are summarized as follow:1. A theoretical model has been developed to investigate hydrodynamic effect of mechanical seals with a laser-textured pores seal face.
主要研究内容和结论如下：1。建立了激光加工多孔端面机械密封的流体动力学分析模型，根据假设，一个孔栏上的液膜压力分布可表征整个密封面上的液膜压力。
The crimped head design, prevents solids from dislodging the seal face, allows the seal to withstand higher pressure and rotational speed and eliminates the metal shell from contacting the seal ring.
波纹式头部设计，防止固体颗粒从密封面上撞出，使得密封能够抵抗更高的压力和旋转速度，避免金属壳接触到密封环。
His face lighted, and he confronted the ragged candidate with this question, "Where lieth the Great Seal?"
他的脸上露出喜色，随即问那衣衫褴褛的候补国王：“国玺在什么地方？”
I've seen people do breath control with gas masks whose rubber edges conform to the face and seal well, regulating the bottom's access to air through the breathing hose.
我见过一些人戴防毒面具，密封完好，施虐方通过控制面具下方的呼吸管来进行游戏。
The seal of the respirator on the face should be fit-checked prior to wearing in the work area.
在佩带至工作区域前，应对在脸上的呼吸器的密封作适应性检查。
The results of calculation indicates that the static axial stiffness of fluid film in double spiral groove face seal is improved due to the pressure loss through feeding holes.
计算结果表明， 供液小孔所产生的压力损失提高了双列螺旋槽机械密封的静态轴向刚度。
Seal chamber pressure of a new double spiral groove face seal working under high velocity and pressure conditions may probably be disturbed in operation, which affects the seal stability.
一种用于高速高压等极端工况下的新型双螺旋槽端面密封在实际运行过程中密封腔压力会出现波动，从而影响密封稳定性。
Seal chamber pressure of a new double spiral groove face seal working under high velocity and pressure conditions may probably be disturbed in operation, which affects the seal stability.
一种用于高速高压等极端工况下的新型双螺旋槽端面密封在实际运行过程中密封腔压力会出现波动，从而影响密封稳定性。
应用推荐