To clean; remove bottom plug, seat spring, strainer and seat disc.
因此要清洗，拆卸底部塞、阀座弹簧、过滤器和阀座阀瓣。
Mainly by the pilot valve seat, valve, diaphragm, spring, adjusting springs and other parts.
导阀主要由阀座、阀瓣、膜片、弹簧、调节弹簧等零件组成。
I mounted the two Spring Grip Clamps on to the seat backs of two chairs. In the clips I mounted Nikon Speedlight SB-80DX and directed them against the white wall.
我将2只大力夹夹在了2个椅子的后面，并且在夹子上安装了SB-80DX，直射背景墙。
In this case a proportional solenoid is used to push a poppet against a seat via a spring.
在此比例电磁铁被用来推动一个锥阀芯通过一个弹簧压缩阀座。
When the handwheel is rotated toward the open position the upper stem is moved away from the diaphragms allowing the spring to push the lower stem away from the seat.
当手轮象开启位置旋转时，上阀杆离开横膈膜，弹簧推动下阀杆离开阀座。
Note: the seats and springs of the first and second check modules are not interchangeable. The heavier spring and smaller diameter seat belong with the first check module.
注：第一和第二止回阀模块的阀座和弹簧是不可互换的。较重的弹簧和较小直径的阀座属于第一止回阀模块。
This means that the operating mechanism must be able to move sufficiently far enough away from the valve to allow the valves to be fully closed against its seat by the valve spring.
这意味着操作机构必须离阀门足够远以允许阀门通过气门弹簧使其完全关闭。
The parallel seat gate assembly consists of two interchangeable spring loaded discs, a fully guided disc carrier, and retaining pins.
平行阀座闸阀由两个可互换弹簧负载阀瓣，一个全导向阀瓣托架和扣环销钉构成。
Standard seat with the spring structure, the seat into the sphere of low pressure to ensure a good sealing performance.
标准阀座采用弹簧结构，将阀座推向球体，保证了良好的低压密封性能。
Clutch spring, valve spring, spring for shock absorber, torsion bar for automotive seat, other kinds of high quality spring and key parts for automotive industry.
离合器弹簧、气门弹簧、减震器弹簧、汽车座椅扭力杆、其他各类汽车行业用高品质弹簧及关键部件。
The lower stem is physically pulled away from the seat instead of being lifted away by the spring.
下阀杆是被从阀座上物理地推开，而不是被弹簧举起来。
The invention discloses a different-pressure automatic shuttle valve, comprising valve body, through end cover, valve core ball, spring seat, spring, inlet end, outlet port .
本发明公开了一种压差式自动关闭阀，该阀包括阀体、通端盖、阀芯球、弹簧座、弹簧、进口端、出口端；
The valve consists of a guard cage, spring, valve disc, retaining ring and seat. It can be combined with pipe fittings such as reducing couplings, drain elbows, etc.
阀由警戒装置、弹簧、阀碟、扣环和阀座组成，可以和许多管件连接，如缩径管接头、排水弯头等。
Vertebral ring, spring, spring seat and clasp, auxiliary seals have "o" shaped rubber ring and PTFE wedge ring, quiet ring for graphite materials (M106K).
椎环、弹簧、弹簧座以及卡环，辅助密封圈有“O”形橡胶圈和PTFE楔形环，静环材料都为石墨(M106K)。
The pump valve has a structure of semi-spheric plunger with guide rod, and its seat and ball are aligned by means of a spring, and it is opened and closed in time.
泵阀件采用带导向杆的半球形柱塞结构，弹簧制动，精确控制阀球与阀座对中，启闭动作及时。
A spring on the valve stem tends to hold the valve on its seat (closed). The lower end of the spring rests against the cylinder head.
气门杆上的弹簧使气门保持在气门座上(关闭状态)。弹簧的下端抵在气缸盖上。
The three sets of mechanical seal components are as follows: actin ring, quiet ring, push the ring, spring, spring seat, auxiliary ring, ring, such as cards.
这三套机械密封都由如下部件组成：动环、静环、推环、弹簧、弹簧座、辅助密封圈、卡环等。
A spring on the valve stem tends to hold the valve on its seat (closed).
气门杆上的弹簧使气门保持在气门座上(关闭状态)。
The movable device mainly consists of the nut, bolt, lifting wedge, backseat, supporting seat of the clamp plate, spring and pressure plate and so on.
活动装置主要有螺母、螺栓、提升楔块、后座、座板支座、弹簧以及压板等组成。
Because the water pressure in spring assembly and valve body makes the conical compression core and seat seal automatically, the flow channel of valve is closed.
因弹簧总成和阀体中水流压力将锥形压芯和锥形压座自动压合密封，阀体水流通道关闭。
The lower stem is encased in a spring which forces the stem away from the seat when the valve is opened.
当手轮象开启位置旋转时，上阀杆离开横膈膜，弹簧推动下阀杆离开阀座。
The water path switching mechanism of the valve is composed of a push rod, a spring, a spring seat, a valve plug, etc.
阀的水路转换机构由推杆、弹簧、弹簧座、阀门塞等组成。
Seat Flip: spring back, also can be slow return spring plus damper body.
座板翻转：弹簧回复，也可做弹簧加阻尼慢回复机构。
The product is designed to have a seat like a spring rebound effect and the formation of double-flex seat, make sure the ball seal reliability.
该产品阀座设计成具有像弹簧一样的回弹作用而形成双挠性阀座，确保了球体密封的可靠性。
Valve Guide, Valve Seat, Valve Lock, Valve Spring Retainer, Casting Products.
气门导管，气门座圈，气门锁片，气门弹簧座，铸件系列。
One plane of the rear-floor strengthening beam is a rear spring supporting seat surface, the rear spring is installed at the lower surface of the rear spring supporting seat surface;
所述后地板加强梁上的一平面为后弹簧支座面，后弹簧安装在后弹簧支座面的下表面；
A kind of new forming technique to manufacture the back spring seat was proposed, called drawing-multi-step sinking with the cylindrical-forming process.
提出了一种生产后簧座的工艺方法：拉深—多步缩口—成形。
The invention discloses a vibrating screw feeder. A feed end of the screw feeder is provided with a spring seat and a dither motor.
本发明公开了一种振动式螺旋送料机，它是在螺旋送料机的进料端安装有弹簧座和高频振动电机。
The invention discloses a vibrating screw feeder. A feed end of the screw feeder is provided with a spring seat and a dither motor.
本发明公开了一种振动式螺旋送料机，它是在螺旋送料机的进料端安装有弹簧座和高频振动电机。
应用推荐