Study on Strategy of Secondary Voltage Control in Power System;
研究了一种新的提高系统电压稳定性的方法——二次电压控制。
This paper studies a new approach, secondary voltage control, to improve voltage stability.
研究了一种新的提高系统电压稳定性的方法——二次电压控制。
At last, the application course was illustrated by analyzing secondary voltage of ignition system.
最后以发动机点火系统的次级电压为例，说明这种方法的应用过程。
There are some problems about the secondary voltage switching between voltage transformers of double bus.
针对双母线电压互感器二次电压切换存在的问题，提出了电压软切换的新方法。
A novel fuzzy logic secondary voltage controller based on polar fuzzy logic rule is designed in this paper.
设计了一种新型的基于极坐标二值模糊逻辑规则的模糊逻辑二级电压控制器。
When intersected with electric line, the coating of the pipeline will be aging due to secondary voltage inducted.
管道与电力线交叉时，由于感应二次电压而使管道防腐层老化。
The basic idea of CSVC (coordinated secondary voltage control) is surveyed firstly and a novel CSVC model is presented.
总结了协调二级电压控制(CSVC)的基本思想，提出了一种新的CSVC模型。
PT secondary voltage step-down is one of the reason which causes the comprehensive error of the electric energy metering equipment.
而PT二次压降又是引起电能计量装置综合误差的直接原因之一。
The on-site test results indicate that energy meter's neutral point virtual connection has a great effect on PT secondary voltage drop.
基于对称分量法，对电能表中性点虚接后的电压互感器二次压降进行了分析，得出了正确接线前后的计量误差变化量。
It has been shown that a primary input voltage can be transformed to any desired open-circuit secondary voltage by a suitable choice of turns ratio.
通过选择合适的匝数比，一次侧输入电压可任意转换成所希望的二次侧开路电压。
Secondary Voltage Control is a new way of voltage control, firstly the power system is divided into many control areas whose electric distance is remote.
二级电压控制是一种新型的电压控制方式，它首先是将整个电力系统分成若干彼此电气距离较远且相互近似解耦的控制区域。
In the voltage correction the voltage variation of tie-line nodes is considered and is added into the traditional secondary voltage control as the feedback.
在电压校正中，考虑了区域联络线节点的电压变化，并以此作为反馈添加到传统的二级电压控制中。
The secondary voltage response is analysed, At the same time, the parameter of up pressure and recoil pressure and recoil pressure resistance method are discussed.
同时，讨论了影响上冲电压和反冲电压的多数以及对反冲电压的抑制措施。
As an example, Finite element analysis and optimization design are made to a voltage transformer of rating primary voltage 35KV, rating secondary voltage 100V, rating frequency 50HZ.
并以额定一次电压35KV，额定二次电压100V，额定频率50HZ的电压互感器为例，进行了有限元分析计算和优化设计。
The numerical simulation for proposed secondary voltage control system on classical New England power system is executed, and simulation results show that the proposed design scheme is effective.
最后用经典的新英格兰系统进行了数字仿真，仿真结果表明了文中所提设计方案的有效性。
There are some problems about the secondary voltage switching between voltage transformers of double bus. To solve these problems, a new method, soft switch of voltage, was proposed in this paper.
针对双母线电压互感器二次电压切换存在的问题，提出了电压软切换的新方法。
The operation situation of ESP is identified by the main items such as inservice rate of electrostatic fields, inservice rate of equipment, and acceptable rate of secondary voltage and current, etc.
用电场投入率、设备投入率、二次电压合格率、二次电流合格率等主要项目表征电除尘器运行状况的优劣。
Ignition coil primary winding. Current flow through the coil produces an electromagnetic field, which is used to induce a high voltage in the secondary coil.
点火线圈初级绕组。电流通过线圈，产生一个电磁场，用来在次级线圈中产生高电压。
A new method for calculating secondary arc current and recovery voltage on double-circuit transmission lines by twice-model transformation was proposed.
提出了利用二次模变换计算同杆双回输电线路潜供电流与恢复电压稳态值的方法。
The machine can perform two-wire, three-wire and multi-wire parallel winding or flat copper wire winding to completely resolve the mechanical winding of voltage transformer secondary coils.
该机可进行双线、三线多线并绕或扁铜线绕制，使电压互感器二次线圈采用机械绕制的问题得到彻底解决。
For the electric welding machine two secondary side wiring and electrode holder, welding connection cable, its characteristic is high, low voltage resistance.
用于电焊机二次侧接线及连接电焊钳、电焊机的专用电缆，其特性是电阻大、电压低。
After the partition results being achieved, a secondary control strategy of the OLTCs is implemented depending on the voltage quality and energy loss reduction in the period of specified interval.
在优化分段的基础上，根据各控制时段内不同时刻的网损及电压质量，再决定是否用OLTC进行二次调节。
On a distributor system, the secondary HT voltage produced by the coil is allocated to the appropriate spark plug via the contacts inside the distributor cap.
对于一个分接器系统，次级高压电被引到了合适的火花塞，通过在分电器内部的接触。
The paper presents the inspection method of the non - voltage in secondary side output fault, the electrical test and the judgment of the capacitor voltage transformer.
对电容式电压互感器二次无电压输出故障的检查方法、电气试验及判断作了说明。
The primary circuit is the low-voltage side of the system and controls the secondary circuit, which is the high-voltage side of the system.
初级回路是系统的低压端，并控制这次级回路，而次级回路是系统的高压端。
The computation of residual voltage offers the theoretical foundation to the design of automatic secondary reclose, and it is also the analysis basis for capacity braking.
残压计算为自动二次重合闸装置的设计人员提供了理论依据，也是分析异步电动机电容制动过程的基础。
An electric transformer changes the alternating voltage applied to it in proportion to the Numbers of turns in its primary and secondary windings.
变压器其交变电压的改变与初级线圈及其次级线圈的匝数成正比。
The secondary system consists of step-down transformers and secondary circuits at utilization voltage levels.
二次配电系统是由降压变压器和满足最终用电设备电压等级的二次电路组成。
The distributor's second job is to distribute each high-voltage surge to the correct spark plug at the correct time by means of the distributor rotor and cap and secondary wiring.
分电器的第二个作用是通过分火头，旁电极和辅助线路，将高压电流准时分配给相应的火花塞。
The distributor's second job is to distribute each high-voltage surge to the correct spark plug at the correct time by means of the distributor rotor and cap and secondary wiring.
分电器的第二个作用是通过分火头，旁电极和辅助线路，将高压电流准时分配给相应的火花塞。
应用推荐