Serial port: The connection for serial interface.
串联插口：连接串联接驳器的插口。
By connecting serial interface or something like that?
通过连接串行接口或类似的东西？
Communication is realized through IEEE488 and its serial interface.
通信由IEEE488接口板及其串口完成。
Using OXCF950 chip, serial interface is set by use of E2PROM within oxcf950.
选用OXCF950芯片，并利用该芯片内部的E2PROM对串口进行设置。
The article introduces a design method of a general serial interface clock chip.
介绍了一种通用串行接口时钟芯片的设计方法。
Most of single chip are limited in many applications, for it has only one serial interface.
大多数单片机只有一个串口，使其在许多场合的应用受到限制。
Additionally, since it is based on a serial interface, SAS allows for increased device support.
因为它基于串行接口，所以SAS允许增加设备支持。
This register defines the physical serial interface which will be used for data communications.
这个寄存器定义了将用于数据通信的物理串行接口。
The hardware connection drawing of serial interface between MCU AT89C52 and LCD is illustrated.
给出了单片机AT89C52与液晶显示器件的串行接口硬件连接图。
Programming for setup and control is accomplished using a 3-bit SPI-compatible serial interface.
设置与控制的编程利用3位SPI兼容串行接口来完成。
This DDS program-controlled sine signal generator system is based upon computer's serial interface.
本dds程控正弦信号发生器系统基于计算机串行接口。
It is helpful to the designer of serial interface communication program of the real time clock device.
该方法对于实时时钟器件串行接口通信程序的设计具有一定的借鉴作用。
The serial interface operates in internal clocking (master) mode, the AD7721 providing the serial clock.
串行接口在内部时钟(主)模式下工作，AD 7721提供所需的串行时钟。
The serial interface bus IEEE1394 with high performance has been used in multi-mainframe VXI test system.
高性能串行接口总线IEEE1394目前已用在多主机箱VXI测试系统中。
RS232 interface which is a standard serial interface mode has been widely used in computer communication.
RS232接口在计算机通讯中应用非常广泛，成为一种标准的串口通讯方式。
This controller system can link to PC by serial interface and can real-timely display data of all testing point.
该控制系统可以通过串口与计算机连接，实时显示各检测点数据。
If the serial interface is not able to generate an interrupt, set this value to any unused interrupt vector address.
如果串行接口是无法产生一个中断，将此值设置为任何未使用的中断向量地址。
The data communication through computer's serial interface is often involved in the design of distributing control system.
在集散控制系统设计中，经常会涉及到利用计算机串行接口进行数据通信。
If the instruments have a GPIB or serial interface, you can control them with a computer equipped with a similar interface.
如果设备具有通用接口总线或串行接口，你可以通过一个带有相似界面的计算机来控制。
The AD7656 has both a high speed parallel and serial interface allowing the devices to interface with microprocessors or DSPs.
AD 7656同时具有一个高速并行接口和一个高速串行接口，为器件与微处理器或DSP进行接口创造了条件。
Examples of devices at this layer include the SLIP driver over a serial interface or an Ethernet driver over an Ethernet device.
例如，包串口使用的SLIP驱动程序以及以太网设备使用的以太网驱动程序都是这一层的设备。
When in Serial interface mode the AD7656 has a Daisy Chain feature allowing multiple ADCs to connect to a single serial interface.
在串行接口模式下，AD7656允许多个ADC以菊花链形式连接至单个串行接口。
By using this technology, you can create interconnections that are more flexible than the serial interface supported by the MIDI standard.
利用这种技术，用户可以创建互连网络，比MIDI标准支持的串行接口更具灵活性。
NC program edit and management are realized, and receiving NC program edited in other computer by RS232 serial interface is also achieved.
实现了数控程序的编辑和管理，以及通过RS232串行接口接收用户离线编写的数控程序。
The microprocessor adopts 89c52, and serial interface has adopted RS - 485, can download and debug online, and connect with other equipments.
微处理器采用89c52，并且串行接口采用了RS- 485，可以进行在线下载和调试，以及与其它设备的连接。
The communication of the master computer and subordinative computer adopts RS232 serial interface, which adapt the long distance communication.
微机和下位机的通讯采用RS232串行接口，适用于远距离通讯。
SPCE061A duplexing asynchronous serial interface of communication can realize many machine communication, make up step type control system all.
SPCE061A的全双工异步通讯的串行接口可实现多机通讯，组成了步式控制系统。
MIDI controllers and synthesizers are connected using cables that allow the commands to be sent between devices using an asynchronous serial interface.
MIDI控制器与合成器通过电线相连接，利用异步串行接口可以在不同设备间传送命令。
There were two kinds of interfaces: parallel and serial interface mode, serial interface was mainly discussed and an example was given for designing.
接口控制形式有并行和串行两种，着重介绍串行接口控制，并给出设计实例。
There were two kinds of interfaces: parallel and serial interface mode, serial interface was mainly discussed and an example was given for designing.
接口控制形式有并行和串行两种，着重介绍串行接口控制，并给出设计实例。
应用推荐