Mount gearbox on housing, assuring that coup ling key slot accepts gearbox shaft key properly.
在壳体上安装齿轮箱,确保齿轮箱轴键妥当地固定在耦合键槽中。
With the input shaft key secured with a set screw, an input and output shaft key configuration delivers optimum positive connection for superior torque transmission.
输入轴键受到固定螺钉的保护,输入和输出轴键配置实现最佳的刚性连接以提供更好的扭矩传送。
The key technology of hollow assembled camshaft is joint between the shaft and the cam lobes.
中空装配式凸轮轴的技术关键为凸轮和轴体之间的连接。
The input power of motor and shaft power of pump are key measurements in field test of pumping stations.
电动机输入功率和水泵轴功率测试是泵站现场测试的重要内容。
Generally, two screws are placed in the hub: one screw bears on the key and the other bears on the shaft.
一般在轮毂内装有两个螺钉,一个螺钉压在键上,另一个则压在轴上。
Straightening of the shaft after heat treatment is a key process.
在轴杆类零件生产过程中,热处理后校直是一道关键工序。
The key to solve the problem lies in the optimal design of clearances between the insert rotary shaft and its bearing as well as the round insert fitted hole.
解决刀片回转不均匀问题的关键在于优化设计刀片回转轴与轴承、刀片内孔之间的配合间隙。
The crossing Angle between the driving shaft and the driven shaft is a key parameter that affects the performance of the pump.
万向节机构的输入轴和输出轴的夹角是影响泵性能的一个关键参数。
The fifth chapter studied the key shaft, linking brace and pole base of experiment platform, using the finite element analyzing software, providing the intension checking and structure optimizing.
第五章,利用有限元分析软件对实验台的关键件主轴、曲柄联接柱及长杆固定座进行有限元分析,并进行了强度校核和结构优化。
In this article, several key points in the reform of the shaft seal used in the rotary disc tower were analyzed.
本文分析了带旋转轴塔轴封改造中应注意的几个关键问题。
The unique locking bar system prevents the key on the output shaft from tipping in the keyway, eliminating the possibility for key and keyway damage that results in a loss of productivity.
独特的锁闭杆系统,防止输出轴上的键在键槽倾斜,消除了键和键槽损害的可能性及其可能会导致的生产力损失。
The principle and key design points of an instrument composed of an eddy-current transducer and an MCS-51 microprocessor for monitoring bow of heavy shaft are introduced in this paper.
本文介绍了由电涡流传感器和MCS-51单片机组成的大轴弯曲量监视仪的原理和设计要点。
The main shaft bearings of aircraft engine are key parts of plane, its reliability and life affect directly on the reliability and life of engine and even whole plane.
航空发动机主轴轴承是飞机关键部件的关键零件,其可靠性和寿命直接关系着发动机乃至飞机的可靠性和寿命。
The security of freezing wall is the key problem of freezing shaft sinking in deep alluvium.
冻结壁的安全性是深厚冲积层中冻结凿井的关键问题。
The crank shaft is a key part of the internal-combustion engine so that machining it with high efficiency and precision is the goal pursued by the manufacturers.
曲轴是各种内燃机的关键零件,高效、高精度加工曲轴一直是内燃机生产厂家追求的目标。
The utility model discloses a hinge for an insulating cover of a steel ladle, which comprises a fixed slot, a rotating slot, a rotating shaft, a pin key, a pin slot, and a supporting arm.
本实用新型公开了一种钢包保温盖铰链,该机构包括固定槽,转动槽、转动轴、销键、销槽支撑臂。
Study of the theory of choosing modification coefficient of double shaft move wheel gear is the key to the rational design of this mechanism.
研究双轴滑移齿轮机构变位系数的选择理论,是合理设计这种机构的关键问题。
The shear strength between soil and structure interfaces in high stress is one of key research in shaft lining fracture theory.
高应力下土与结构接触面抗剪强度研究是当前井壁破裂理论研究的关键之一。
The results have shown that the torque tube unbalance is not a key factor in high speed dynamic balance, but effects the power shaft.
结果表明:测扭基准轴的不平衡量虽然不是转子高速动平衡的决定性因素,但影响到传动轴的动平衡。
The prevention of freezing pipe breaks in deep shaft freezing has become a key technique in mine construction in China.
防止冻结管断裂在国内深井冻结中已成为关键技术。
The excavation speed of pilot shaft is one of the key difficulties for the excavation of shaft, high ones in special, of hydropower works.
水电工程竖井特别是高竖井开挖,主要难点体现在竖井导井开挖的速度上。
It includes driving shaft, helical spring, key way on the driving shaft, block, front stop unit, back stop unit, etc.
传动轴、螺旋弹簧、传动轴上的键槽、滑块、前限位和后限位等部分。
The inner part of a shaft end hole of the backstop is connected with a driven shaft through an expansion bush and a double flat key;
在逆止器的轴端孔内通过胀套和双平键与从 动轴连接;
Two ends of the motor shaft of the motor respectively extend to match and fix with an impeller inducer and a belt pulley through a key slot and a key.
此电机的电机轴两端伸出分别同一风叶和一皮带轮通过键槽和键相 配接固定;
The model can simulate operation conditions of the tunnel and solve key technical problems of ventilation shaft.
该模型通可以较好地模拟运营工况和解决通风风井部位的关键技术问题。
A stainless steel output shaft includes a captive key and stainless steel fasteners, and a single double-acting piston prevents overlap of the clutch and brake functions.
一个不锈钢从动轴包括一个被控制键和不锈钢紧固件,以及一个双作用活塞防止离合器和刹车功能重叠。
The paper reports the support technique of inclined shaft crossing surface soil with swelling and watering, in this case the stability of whole support system is key factor for successful control.
论述了斜井掘进穿越具有膨胀性的含水表土层过程中所采用的技术方案,指出支护结构的整体稳定性是支护成功的关键。
The wall submersion in the west air shaft of Zhangji Coal Mine, is the key engineering of ensuring the shaft to satisfy production use.
张集煤矿西回风井下沉井壁是钻井结束后确保井筒满足投产使用的关键工程。
The wall submersion in the west air shaft of Zhangji Coal Mine, is the key engineering of ensuring the shaft to satisfy production use.
张集煤矿西回风井下沉井壁是钻井结束后确保井筒满足投产使用的关键工程。
应用推荐