ECAP is an effective method realizing pure shear deformation.
ECAP是实现材料纯剪切变形的有效方法。
The effect of shear deformation and rotary inertia are considered in the paper.
文中考虑了剪切变形和转动惯量的影响。
In this paper, initial parameters method for the bending problem of thick beam with shear deformation is presented.
提出了考虑剪切变形时深梁弯曲问题的初参数法。
This already became an important feature and universal laws of ore-control in the shear deformation zone in the area.
此已成为该区剪切变形带内控矿的重要特征和普遍规律。
Cracks form in the regions, where shear deformation is larger, after the plastic deformation accumulates to some degree.
裂纹于塑性变形积累到一定程度之后，在切变变形较大的区域表面形成。
The experiment and analysis results show that frame model with truss transfer storey has partial bending shear deformation.
试验和分析结果表明：带桁架转换层框架呈局部弯剪型的变形特性。
The transfer matrix method for the bending and stability of the variable section beams with shear deformation is presented.
提出了考虑剪切变形时变截面梁弯曲和稳定计算的传递矩阵法。
The effect of diffusion controlled interfacial sliding on the transverse shear deformation of fibrous composites is studied.
研究了扩散控制的界面滑动对纤维复合材料的横向剪切变形行为的影响。
The effect of transverse shear deformation is considered and Angle of rotation of surface normal for each layer is different.
这类板的横向剪切变形效应必须予以考虑，因而层板不同层的表面法线的转角是不同的。
In this model, besides considering bending and shear deformation, the axial deformation of columns has also been taken into account.
这个模型除考虑竖杆的弯曲和剪切变形外，还考虑了轴向变形。
The shear deformation, as in a nonlinear constitutive relation, is the most principal deformation mode for plain woven textile composites.
对于平纹机织复合材料，剪切变形是最主要的变形形式，其本构关系具有非线性的特征。
The examples show that the critical load of composite shells of revolution will decrease when considering the transverse shear deformation.
数值算例表明，对于复合材料旋转壳，横向剪切变形使其临界载荷降低；
In last Indonian-Yenshan Stage, They also underwent left-slipping ductile Shear deformation and metamorphism along Wuchuan-Sihui fault belt.
印支末期—燕山期又遭受了吴川—四会断裂带的左行走滑韧性剪切变形、变质作用。
The natural frequencies of the intelligent beam with the rotary inertia and shear deformation of the beam are lower than that without those.
考虑梁的转动惯量和剪切变形时，智能阶梯梁的频率比没有考虑时的要低。
The middle Xuefeng mountain is a regional shear deformation zone, there are many Au deposits which connect with the shear zone in the district.
雪峰山中段为区域性剪切变形带，区内分布了众多与剪切带有关的金矿床（点）。
It is shown that the fiber can considerably resist the matrix creep along the axial direction, but not so for transversely and shear deformation.
研究表明，纤维在轴向对基体的蠕变起到明显阻止作用，而在横向和剪切变形下的作用较小。
Based on parameters studies, it was proposed that the critical value of lid is 8 beyond which the shear deformation can be ignored in common cases.
通过参数分析，提出在常见桩土参数情况下可以将剪切效应忽略不计的界限长径比约为8。
The effects of bending-torsion coupling, warping stiffness, shear deformation and rotary inertia are taken into account in the present formulations.
在本文研究中考虑了弯扭耦合、翘曲刚度、转动惯量和剪切变形的影响。
The effect factors for wetting deformation in wetting test, such as time, pause-shear deformation and the deformation steady criterion, are investigated.
对湿化变形试验中影响试验结果的时间、停机变形及变形稳定标准进行了深入研究。
The nonlinear dynamic stability of viscoelastic plates with finite deformations and takingaccount of higher-order shear deformation effects is discussed.
建立了有限变形条件下，粘弹性基础上考虑高阶横向剪切效应粘弹性板的动力学行为的数学模型；
A model for gold prognosis and regional brittle-ductile shear deformation transition was set up by study of the known large-and middle-scale gold deposits.
据现有大中型金矿研究建立了区域脆-韧性变形转换带结构模式和金矿预测模式，可有效指导找矿勘探。
An element tangent stiffness equation was derived based on the secant stiffness equation of stability function elements with shear deformation effects considered.
以考虑剪切变形影响的稳定函数单元的割线刚度方程为基础，导出了单元切线刚度方程。
The shear stress is the main power source for mineralization, and activation, overlapping and enrichment of ore-forming fluid occur in each shear deformation phase.
剪切应力，是成矿的主要动力来源，各剪切变形阶段，均有矿液的迁移、叠加和富集。
The analysis and the spot measure data prove the deformation of composite soil nailed wall include shear deformation, bend deformation and total deformation of soil.
由实测和理论分析表明复合土钉墙的变形是由剪切变形、弯曲变形以及墙底基底以下土体变形组成。
The Gaussian radial basis functions and first-order shear deformation theory are presented to calculate the natural frequencies of generally laminated composite plates.
采用高斯径向基函数和一阶剪切变形理论对普通复合材料叠合板的固有频率进行了计算。
The results show that the solution of differential equations' MWR is successful, and the precision of the shear deformation theory of cylindrical shells is satisfactory.
结果表明：本文提出的控制微分方程的加权残值法解是成功的；而且圆柱壳的剪变形理论有满意的精度。
The effects played by transverse shear deformation, panel geometric parameters, total number of plies, fiber orientation, and initial geometric imperfections are studied.
讨论了横向剪切变形，曲板几何参数，铺层数，铺展方式和初始几何缺陷等各种参数变化的影响。
There is a gradual decrease in tectonic superimposed hydrostatic pressure from compressional deformation zone through shear deformation zone to extensional deformation zone.
处在挤压变形带、剪切变形带到引张变形带(及地域)中岩石所承受的构造附加静水压力有逐次变小的规律性。
Based on the first order shear deformation theory and Hamiltonian principle, the governing equations and boundary conditions of rotating multi-layer annular plate were derived.
基于一阶剪切变形理论和哈密顿原理，建立了旋转层合圆板动力学运动方程和相应的边界条件。
Based on the first order shear deformation theory and Hamiltonian principle, the governing equations and boundary conditions of rotating multi-layer annular plate were derived.
基于一阶剪切变形理论和哈密顿原理，建立了旋转层合圆板动力学运动方程和相应的边界条件。
应用推荐