Extra high shear resistance and adhesion, can bear great force.
极高的抗剪切强度和粘接强度，可承受很大的外力。
The research on the shear resistance of SRSHC columns is carried out.
研究了钢骨超高强混凝土框架柱的抗剪承载力。
High shear resistance, no edge warp, using structural separating paper.
高抗剪切力，不会翘边，使用结构型离型纸。
Very short flow variability, low viscosity, transparent, heat shear resistance.
极短流变性，黏度低，透明，耐热耐剪切性。
Furthermore, the contribution of flanges to the shear resistance of the wall was analysed.
同时还分析了翼缘对墙片的抗剪承载力的贡献。
The drop number reflects the shear resistance property of liquid bridge between solid particles.
生球落下强度大小体现了固体颗粒间联接桥抗剪作用的强弱。
Making use of the theoretical formula of shear resistance, the shear mechanism of general beams is analyzed.
利用理论抗剪公式，分析了一般梁构件的抗剪机理。
Generally, it's no need to design fixture for concrete filled steel tubular columns in shear resistance expressly.
一般情况下，不需要专门为钢管混凝土柱进行抗剪配筋设计。
These are discussed on present test method for masonry shear resistance, and on relative improvement for reference.
本文分析了目前砌体抗剪强度试验方法的现状，论述了如何改进砌体抗剪强度试验方法，以供参考。
There is not composite enhancing effect to shear resistance of reinforced concrete beams between steel fiber and stirrups.
钢纤维与箍筋之间在提高钢筋混凝土梁斜截面承载力方面不存在“藕合增强效应”。
It is pointed out that punching shear of plate and shear of oneway plate are two special cases of shear resistance of plates.
本文指出双向平板的冲切问题与单向板的抗剪问题是平板抗剪问题的特殊情况。
Based on the experiments, the effect factors of the shear resistance and hysteretic behavior of compound bearing walls are analyzed.
并以试验为基础，对复合承载墙体的抗剪承载力的影响因素和滞回性能进行了分析。
The shear resistance of bolted joint can be obviously improved by higher ratio of bolt section to bolted joint area and inclined bolt.
倾斜锚杆加固的节理抗剪强度比垂直锚杆大，提高锚固面积比能显著提高节理抗剪强度。
Through pullout tests for shear resistance of the adhesive steel bar in the metal tube, the bond principals and failure modes of adhesives are studied.
通过对钢筋与金属套筒之间采用植筋胶粘结的拉伸抗剪试验，探讨了植筋胶的粘结机理和拉伸抗剪破坏模式。
Thus, when reinforcing the multi-span simply-supported T-beam by this method, enhancing the shear resistance of beam at intermediate support must be conducted yet.
建议在采用此方法加固多跨简支T梁的同时应对中间支点梁的抗剪能力进行加固。
The results show that the plate strip influences the shear resistance of walls lightly based on a detailed parametric study using nonlinear finite element analysis.
对墙体进行了参数分析，结果表明：墙体的横向钢带拉条对墙体抗剪承载力影响不大；
According to the test, the Steel-Fibre Reinforced concrete has good properties, such as stretching, shear resistance, cracking resistance, earthquake resistance and so on.
试验表明，钢纤维混凝土具有优良的抗拉、抗剪、抗裂、抗震等性能。
The numerical simulation and analysis of shear resistance behavior of two-side connected steel-plate shear wall (SPSW) was carried out by the finite element software ANSYS.
采用ANSYS有限元程序对两边连接钢板剪力墙进行数值模拟分析。
With the FRP strengthening system, performances of masonry structures increase obviously in terms of seismic resistance, shear resistance and flexural capacity out of plane.
FRP加固砌体结构可以提高砌体结构的抗震、抗剪和平面外抗弯性能；
Due to difficulties with quantitative analysis in theory on shear resistance of reinforced concrete composite beam, numerical simulation becomes a direct and efficient approach.
钢筋混凝土叠合梁的斜截面承载力，从理论上定量分析存在着较多困难，但数值模拟分析是一种直接有效的途径。
Strong adhesion, high shear resistance, no residue left when removed, using structural separating paper. It's used for mounting photo sensitive resin plate on printing roller or resin sleeve.
高粘性，高抗剪切力，揭处不留残胶，使用结构型离型纸，固定感光树脂版于印刷辊筒及树脂套筒上。
The peculiar solution structure makes that solution have high-effect merit such as increasing viscidity, temperature resistance, salts tolerance, shear resistance, he overall propulsion nature.
这种特殊溶液结构使该溶液具有高效增粘性、抗温耐盐性、剪切恢复性以及整体推进等特点。
Base on an engineering, this text introduce the application of technology for strengthening with carbon fiber reinforced polymer laminate in concrete frame beam strengthened for shear resistance.
本文根据工程实际情况，简要介绍了碳纤维片材加固技术在混凝土框架梁抗剪加固工程中的应用。
The test results show that the reinforced porous brick wall similar tO normal reinforced brick wall on aseismic design, shear resistance of the bar cannot be used very much when using lap joint...
试验结果表明，配筋多孔砖墙与配筋普通砖墙具有相近的抗震性能，水平筋采用搭接接头时不能发挥钢筋的抗剪作用以及端部锚固钢筋具有提高承载力和约束砌体作用等。
The paper analyzes the sliding range and sliding surface of an old landslide by investigating an old sliding slope. In addition, back analysis is used on shear resistance parameters of slide surface.
通过对某顺层古滑坡的现场调查，分析判断了古滑坡的滑动范围、滑动面，并对滑动面抗剪强度参数进行了反分析计算。
Axial compressive ratio is advantageous to seismic behavior of staggered joints. It can improve joints first crashing loads, shear resistance capacity and reduce the sliding displacement of beam bars.
轴压比对节点的抗震性能有利，它可以提高节点的初裂荷载、抗剪承载力、减小节点中梁筋的粘结滑移量。
The correlation between cyclic liquefaction resistance of undisturbed and remolded saturated loose silts was studied using the cyclic triaxial apparatus with measurements of shear wave velocity.
采用剪切波速与振动三轴联合试验装置，研究了具有松散结构的原状和重塑饱和粉土抗液化强度之间的相关性。
Should have the high resistance to emulsion and the good shear stability, favors with the extension working life.
应具有较高的抗乳化性和良好的剪切稳定性，以利于与延长工作寿命。
By adjusting the starch milk concentration, temperature and drum speed to adjust the product capability of resistance to shear stress, the drying process of aging and viscosity.
通过调节淀乳浓度、滚筒温度及转速来调整产品承受剪切力的能力、干燥过程中的老化及粘度等性能。
By adjusting the starch milk concentration, temperature and drum speed to adjust the product capability of resistance to shear stress, the drying process of aging and viscosity.
通过调节淀乳浓度、滚筒温度及转速来调整产品承受剪切力的能力、干燥过程中的老化及粘度等性能。
应用推荐