The whole experimental process can be displayed in both computer and the simulation experiment interface at the same time.
整个实验过程可同时在计算机上和模拟实验板上直观的展现出来。
The simulation results show that the system can realistically demonstrate the simulation process of the robot, and besides, it meets the real time requirement of system simulation.
仿真结果表明，该视景系统能够逼真地表现出地面移动机器人的仿真过程，并满足系统仿真的实时性要求。
The simulation process is similar to real time signal analysis of practical reconnaissance system by means of memory copy technique which refreshes display signals.
本系统使用内存拷贝技术对显示信号进行动态刷新，使仿真过程更接近侦察系统的信号实时分析。
The system can simulate the executive process of nc programme files, and realize the simulation of speed and acceleration curve, and process time and distance with the unit of controlling period.
该仿真系统不仅可以用于仿真NC程序文件的执行过程，而且实现了以控制周期为单位，对速度、加速度曲线以及加工时间、加工距离的仿真。
The calculating simulation model was used to simulate the assembling process of the passenger and to find the maximum assembling passenger of railway passenger station and the time it appears.
计算模拟模型用来模拟旅客的聚集过程，从而找到车站最高聚集人数和该值的出现时间。
The process simulation scheduling strategy is introduced and the aggregate-project model, time model, resource model, queue model and task-delay model are setup.
提出了仿真过程的多项目集合模型、时间模型、资源模型、队列模型和任务延期处理模型以及基于任务状态的仿真策略。
The article also presents the design theory and implement of molding process control, simulation and machine - time estimation. finally, the control software with above functions is developed.
论文也对成型加工过程进行了较为细致的分析，并在此基础上，提出了成型过程式控制制、成型过程模拟及成型时间预测功能的设计原理和方法。
During the modeling process, there are some simplifications for some of the details of real car, thinking about the simulation time and computer hardware problems.
在建立仿真模型过程中，考虑到仿真时间与计算机硬件问题，对实车部分细节做出相应的简化。
Simulation results illustrate that LM algorithm speed up learning process and reduce training time greatly. The identification effect is very good.
仿真结果表明LM算法可大大地提高学习速度，缩短训练时间，且辨识效果很好。
The computer simulation results show that the control system can enhance control accuracy, shorten overshoot and static error and cut down time of adjustment process.
仿真结果表明，该控制系统提高了控制精度和减小超调量及静态误差，缩短了调整过程时间。
The using of the process simulation software can cut the design cost and shorten the design time.
使用工艺模拟软件不仅能够节约设计成本，还能缩短设计的时间，已越来越多的受到用户的青睐。
Services in the simulation process, by increasing the value of the flight service counters and service ahead of the opening value, reducing the waiting time of queuing;
在模拟的服务过程中，上航通过增加值机服务柜台和提前开通值机服务，减少了旅客排队等待的时间；
Computer simulation of the process suggests, however, that several smaller moons may have formed at the same time.
然而，计算机模拟显示，还有若干小型“月球”也在此过程中形成了。
In the process of groundwater numerical simulation, groundwater withdrawal is always treated as certain sink item for long time.
地下水数值模拟过程中，人工开采量大都被当作确定项处理。
Otherwise, in order to provide a effective simulation platform for control algorithm, this paper make the design of a real-time industry process simulation platform as another content.
同时为了为算法设计提供良好的实验平台，本文将设计工业过程实时模拟平台作为另外一项重要的研究工作。
This paper describes the process that establishes the coherent clutter video signal module and the design and realization of real-time simulation system in radar multi-target simulation system.
阐述了在雷达多目标仿真系统中杂波相干视频信号模型的建立过程和实时仿真系统的设计及实现。
An efficient and simple calculation method is pro-posed for the simulation of the startup process with base load, which can greatly save computation time.
提出一种简单有效的方法计算带压仓负荷的开机过程，能大大节省计算时间。
The details of real-time data acquisition, control of tension process simulation and online performance analysis of the simulative testing bench are further illustrated.
在此基础上，文章进一步说明了系泊锚机张力仿真试验台的实时数据采集、仿真过程控制和在线性能分析等功能的实现细节。
Self collision detection is the most time consuming process in deformable object simulation. In this paper, a novel algorithm is presented for performing self collision using graphics hardware.
自碰撞检测是可变形体模拟过程中最耗时的环节，提出一种使用图形硬件的快速算法。
At the same time, 3D-FEM simulation of the whole process was performed using DEFORM-3DTM software. And the load-stroke curve, effective stress and strain distribution, and so on were obtained.
用三维有限元数值模拟软件DEFORM-3DTM进行了数值模拟研究，得到了锻造载荷-行程曲线以及整个成形过程的应力和应变分布等，并与传统的均匀加放余量法进行了比较。
This paper introduces dynamic real-time simulation training system for the whole process of the third PTA plant of Yangzi chemical plant with an annual production capacity of 450 kilotons.
介绍扬子化工厂PTA三线年产45万吨对苯二甲酸全流程仿真培训系统的开发过程。
At the same time, the thesis research the convolution coding and decoding theory in detail, as well as present the process of research on theory and simulation of this viterbi decoder.
同时，文章对卷积编译码的理论和方法进行了较为细致的研究，并给出此设计方案的理论仿真分析。
Through comparative study and repeated experiments, this thesis gives the key technology and core algorithm of the real-time filter, and confirms its feasibility through the simulation process.
通过反复的研究比较和实验，论文给出了采集系统实时滤波器设计的关键技术和核心算法，并通过仿真验证其可行性。
Finally, we make computer simulation for the cooling process and obtain the temperature as a function of the cooling time.
最后对冷却的物理过程进行了理论计算，从而得到了冷却过程中温度随时间的变化曲线。
The article makes a example with a weapon simulation test system and puts forward a kind of practiced and workable ways for process space-time of weapon system half-real simulation test.
详细分析了时空不一致产生的因素；并以某型武器模拟试验系统为例，提出了武器系统半实物仿真试验中处理时空一致性几种实用且可行的方法。
In the simulation result analysis and evaluation process, this paper studied form equipment processing queue, production process time, equipment utilization ratio and production bottleneck analysis.
在仿真结果分析和评价方面，从设备加工队列、产品加工时间、设备利用率和生产瓶颈分析等方面进行阐述。
At the same time, the coal pyrolysis simulation process and the results were analyzed and provided basic reference to coal pyrogenation process development and optimization.
同时，对煤热解模拟过程及结果进行了分析，给煤热解过程的工艺开发和工艺优化提供了参考依据。
For a long time, computer simulation drilling process has been used by domestic and foreign scholars, especially in recent years a great progress has been made.
长期以来用计算机数值模拟钻井过程一直受到国内外学者的重视，特别是最近几年来已经取得了很大的进展。
For a long time, computer simulation drilling process has been used by domestic and foreign scholars, especially in recent years a great progress has been made.
长期以来用计算机数值模拟钻井过程一直受到国内外学者的重视，特别是最近几年来已经取得了很大的进展。
应用推荐