In this paper, SIMULINK simulation model of gain self-regulative neuron two-degree-of-freedom PID control is established, which is based on S-function. Also the simulation results are presented.
该文通过编写S函数的方法建立增益自调整的神经元二自由度pid控制的SIMULINK仿真模型，并给出仿真结果。
According to BLDC mathematical model and the movement principle, a simulation model of BLDCM control system by the SIMULINK and PSB block of software MATLAB is built in this paper.
根据无刷直流电机的数学模型和运行原理，通过MATLAB软件的SIMULINK和PS B模块，搭建了电机及整个控制系统的仿真模型。
The paper applies the fuzzy control system toolbox based on MATLAB (SIMULINK) language, through the application of the electrical generator output voltage fuzzy control, supplies a simulation method.
运用了基于MATLAB (SIMULINK)语言的模糊控制系统工具箱，通过对发电机输出电压模糊控制的实现提供一种仿真方法。
Controller was designed in MATLAB fuzzy logic toolbox, and fuzzy controller and taxiing model were used in SIMULINK condition, and the whole simulation model was set up.
在MATLAB模糊逻辑工具箱中对控制器进行设计，并将模糊控制器与滑跑模型应用于SIMULINK仿真环境，建立整体仿真模型。
The result of simulation in MATLAB/SIMULINK indicates that the controller evidently improves the dynamic property of control system. The controller is easily realized and applied in engineering.
进行MATLAB/SIMULINK仿真，仿真结果表明，该控制器明显地改善了控制系统的动态性能，易于实现，便于工程应用。
Combined with MATLAB software, the two methods MATLAB language programming, the combination of FIS editor and SIMULINK are used to realize this kind of controller design, analysis and simulation.
结合MATLAB软件，用MATLAB语言编程及FIS编辑器与SIMULINK相结合两种方法实现了这种控制器的设计、分析与仿真。
By using PID control, through the iterative learning algorithm, the PID control simulation is realized by using SIMULINK.
采用PID控制，通过迭代学习算法，在SIMULINK下实现了PID控制仿真。
According to the principle of material balance in well bores the method of dynamic simulation to describe the changing rules of submergence depth is established in the paper based on SIMULINK.
在现有研究基础上，根据井筒内物质平衡原理，建立了基于SIMULINK下沉没度变化规律的动态仿真方法。
A dynamic analysis method using simulation technology for intermittent rotary sheet transfer mechanism was put forward. The process of mechanics simulation based on SIMULINK was introduced.
提出了运用仿真技术对间歇旋转式造纸机构进行动力学分析的方法，介绍了在SIMULINK下的机构仿真过程。
SIMULINK toolbox which can simulate the linear or nonlinear, continuous or discrete, or both of the hybrid systems, nonlinear system of complex simulation of the effect becomes more apparent.
其中的SIMULINK工具箱可以模拟线性或非线性、连续或离散或两者的混合系统，对复杂的非线性系统仿真模拟的效果更为明显。
In simulation, this paper makes use of the most popular scientific software, MATLAB, and develops the corresponding simulating system with the SIMULINK in it.
在进行仿真的时候，本文采用了广泛应用的Matlab，使用Simulink功能开发了相应的仿真系统。
The simulation model of induction motor is derived in MT axis, the simulation model of voltage source SPWM inverter is derived too, Both of their realization are presented by SIMULINK.
根据MT坐标系下交流电机的数学模型推导出它的仿真模型，同时得出SPWM逆变器的仿真模型，并在SIMULINK中实现。
The paper builds an integrated simulation model including respective subsystems for three phase shunt power active harmonic compensation system based on SIMULINK function of MATLAB.
本文在基于MATLAB的SIMULINK为三相并联型电力有源谐波补偿系统建立了一个包括各个子系统在内的整体仿真模型。
Regarding to the time lag of air supply system software MATLAB / SIMULINK were utilized to create the simulation model of fuel cell dynamic output performance as power level changes.
在考虑空气系统的时间滞后基础上，基于集总参数模型利用MATLAB /SIMULINK软件平台建立电池的瞬态响应仿真模型。
The system simulation is done in SIMULINK. The design is done based on FPGA. With An optimized scheme which reuses multiplication and uses CORDIC algorithm is proposed.
通过三相锁相环在不同参数量值下和不同电网情况下的仿真分析了影响三相锁相环性能的参数，并对三相锁相环的系统性能做了分析、优化设计。
A fast simulation environment has been developed using MATLAB and SIMULINK for behavioral level simulation of spread spectrum clock generator based Fractional-N frequency synthesizers.
提出了一种展频时钟生成的方法，使用MATLAB和SIMULINK开发出了快速模拟基于分数N型频率合成器的展频时钟生成器的环境。
The mathematical models of propulsion, lifting systems and hovercraft hull are built in the paper. The simulation model is established based on MATLAB/SIMULINK with the method of system simulation.
建立了某型全垫升气垫船推进、垫升系统及船体的数学模型，采用系统仿真的方法，建立了基于MATLAB/SIMULINK仿真平台的仿真模型。
This paper introduced the principle of direct torque control and the algorithm of simulation. The simulation model of permanent magnet ac servo system is designed and studied based on MATLAB/SIMULINK.
本文介绍了直接转矩控制原理和仿真算法， 并在MATLAB／SIMULINK下设计永磁交流伺服系统的仿真模型，进行仿真研究。
Finally, according to the inertia of the disc brake electricity mathematical model analysis, the use of MATLAB software SIMULINK tool of inertia system simulation.
文章的最后根据对盘式制动器电惯量模拟的数学模型的分析，使用MATLAB软件中的SIMULINK工具箱对电惯量模拟系统进行仿真。
In this paper SIMULINK, a dynamic simulation tool in MATLAB software, is used to establish the simulation model of the asynchronous motor starting process, and simulation results...
利用MATLAB软件中的动态仿真工具SIMULINK建立了异步电动机起动过程的仿真模型，仿真结果验证了判据的正确性。
Through the application of Matlab in Simulink toolbox of chaotic lu system simulation analysis shows that impulse control is an effective stabilization of chaotic systems by perturbation method.
通过应用Matlab中Simulink工具箱对lu混沌系统进行仿真分析，说明脉冲控制是有效的镇定受扰动混沌系统的方法。
The simplified simulation model composed both of the circuits of the rupture test and the Rogowski coil is centered on the SIMULINK environment of the MATLAB softwar…
仿真和实验表明，本文的优化方法可行，所得试验和检测回路参数可确保爆破试验成功和传感器的良好动态特性。
The computer language of MATLAB has many merits on simulation and analysis of control system. In this article the method of the SIMULINK model on MATLAB is introduced.
MATLAB语言在控制系统仿真与分析方面具有众多优点，文章具体分析了基于MATLAB语言的SIMULINK模型的仿真求解方法。
To reduce the wind disturbance error, the wind disturbance regular pattern is studied using a missile simulation system based on the SIMULINK.
为了减小再入段风干扰造成的误差，利用在Simulink中建立的数字打靶平台对它进行了研究。
A dynamic simulation tool, SIMULINK software package in MATLAB, is taken as the development tool, and applied in the dynamic response computation of the hydraulic servo closed-loop control system.
以MATLAB中动态仿真工具SIMULINK软件包为开发工具，将其应用于该液压伺服闭环控制系统的动态响应计算中，针对上述两种闭环控制系统，给出了考虑干扰量情况下的SIMULINK仿真方法。
A dynamic simulation tool, SIMULINK software package in MATLAB, is taken as the development tool, and applied in the dynamic response computation of the hydraulic servo closed-loop control system.
以MATLAB中动态仿真工具SIMULINK软件包为开发工具，将其应用于该液压伺服闭环控制系统的动态响应计算中，针对上述两种闭环控制系统，给出了考虑干扰量情况下的SIMULINK仿真方法。
应用推荐