Sintering Machine design paperless design will greatly reduce the workload of workers.
烧结机的无纸化设计将大大减轻设计工作者的工作量。
The service life of the preformed block applied in igniters of sintering machine is 2 ~ 3 years.
该预制块应用在烧结机点火器上，使用寿命可达2 ~3年。
The main failure forms of fire bars in cycle type sintering machine are burning erosion and fracture.
环式烧结机炉箅条主要失效形式是烧蚀和折断。
CrMnN steel casting is the key for sintering machine to produce sintering mine in metallurgy enterprises.
铬锰氮钢铸件，是冶金企业生产烧结矿用烧结机中的易损重要备件。
The air leakage on sintering machine affects the technological and economical indexes of sintering process.
烧结机漏风问题直接影响烧结过程的各项技术经济指标。
Reducing the air leak rate is one of the most major methods to raise production capacity of sintering machine.
降低烧结机漏风率是提高烧结机产能的重要因素。
Therefore, the utility model is suitable for trolleys of sintering machines or burning machine in steel plant.
适用各钢铁厂烧结机或焙烧机台车上。
Several failures using ESP at the sintering machine tail are analysed, and the corresponding ways are put forward.
对烧结机机尾电除尘器在使用过程中经常出现的几种故障进行分析，并提出相应的解决方法。
The reasons of high energy consumption on sintering machine No. 2 at Xiangtan I&S Co were discussed from the results of heat balance test.
根据湘潭钢铁公司（以下简称湘钢）2号烧结机能耗现状和热平衡测试结果分析了该烧结机能耗高的原因。
Changes in sintering technology result in variation in working conditions for an electrical precipitator at the head of sintering machine.
随着烧结生产工艺的改变，机头电除尘器的工况条件也发生了变化，作为大型钢铁企业，排放达标对环保尤为重要。
The technical modifications for increasing sintering machine productivity conducted in Xingang sintering plant were presented in this paper.
介绍了邢钢烧结厂为提高烧结机的利用系数所进行的技术改造。
Central Iron and Steel Research Institute (CISRI) built the first electric spark sintering machine in China in 1979 and put it into production.
钢铁研究总院于1979年建成投产国内第一台电火花烧结机。
The paper introduced the characteristics, principles and running situations of equipment of the plane circulation sintering machine waster heat utilization.
介绍了平面循环烧结机余热利用装置的特点、原理和运行情况。
Feeding device of sintering machine is the key equipment in sintering process, Its distribution result has great effect on the output and quality of sinter ore.
烧结机头端布料器是烧结生产中的关键设备，其布料效果的好坏将直接影响烧结矿的产量和质量。
Distributing device distributes the sintering mixture mixed to platform of sintering machine in course of sintering according to production technology requirement.
烧结机布料装置是在烧结过程中按照生产工艺要求把混匀后的烧结混和料从混合料槽中布到烧结台车上面。
Aimed at the existing problem in electronic belt scale for sintering machine of TISCO., the author introduces a late - model technique and describes practical effect.
针对太钢烧结机配料电子皮带秤存在的问题，介绍了一种新型的技术方案，并叙述了实施效果。
With analysis of measured data, income and expense of mass and energy in sintering machine have been acquired comprehensively, and energy utilization has been studied.
通过对测试结果的分析，全面了解本烧结机的质量和能量收支水平。
The burden system of sintering machine and the retrofit of using PLC and host computer to replace the manual operation are described. The retrofit obtained good result.
介绍烧结机的配料系统采用PLC加上位管理机来改造原有手工操作，收到了较好的效果。
Some communly used heating ways of sintering machine for making diamond products are presented in the paper. Analysis and discussion are made on each of the heating ways.
本文介绍了磨料磨具行业中，金刚石制品烧结压机所应用的几种加热方式，并对每种方式进行了分析和综述。
The producing practice of sintering machine in recent years in Shaoguan Smelter is introduced, and the methods improving the sintering machine's efficiency are put forward.
介绍了近几年韶关冶炼厂烧结机的生产情况，分析了提高铅锌烧结机生产效率的途径，并提出了建议。
Its principle, characteristics, the difference between the circular sintering machine and the band sintering machine and the application in the production are mainly introduced.
介绍了它的工作原理、主要特点、环式烧结机与带式烧结机的比较及在生产中的实际应用。
The control system for heat-recovery process from circulating cooling of sintering machine is introduced. In this system small- sized DCS, PLC and variable frequency speed adjuster are composed.
介绍在烧结机环冷余热回收工艺中应用小型DCS、PLC与变频调速器所构成的控制系统。
According to the authors' accomplishments of research work and the domestic status quo, some ways and practical effectiveness of energy saving of sintering machine were introduced in this paper.
根据作者们近几年的科研协作成果，针对国内现状，介绍了几种烧结工艺节能的途径及应用效果。
The theoretical basis of the compression sintering is explained, and the technological schemes and the results of compression sintering at Baosteel no. 3 sintering machine are introduced as well.
阐述了加压烧结的理论基础，介绍了加压烧结在宝钢3号烧结机应用的工艺及其效果。
The research of ignition system in sintering machine, including smoothing raw material layer, low negative pressure ignition, igniting intensification, selection of igniting device, is introduced.
介绍了攀钢烧结厂为完善点火制度在铺平料面、低负压点火、提高点火强度、点火器种类的选择等方面所作的研究与应用。
The waste heat boiler of sinter ring cold machine was developed to recover sensible heat of sintering mine.
为回收烧结矿显热，研制出烧结环冷机余热锅炉。
This article introduces the design of a special man-machine interface to be used in vertical sintering furnace, to ensure safety in production and convenience in operation.
本文针对垂熔生产中的特殊问题，介绍如何设计一个专用的人机接口，满足生产安全和操作方便的要求。
This article introduces the design of a special man-machine interface to be used in vertical sintering furnace, to ensure safety in production and convenience in operation.
本文针对垂熔生产中的特殊问题，介绍如何设计一个专用的人机接口，满足生产安全和操作方便的要求。
应用推荐