For example, a date can be passed in the message using a fixed-size string representation of YYYY-MM-DD.
比如，可使用YYYY-MM-DD 这样的定长字符串表示来传递日期。
The implant consists of a tiny panel, 3 by 3.1 mm in size, containing a 38 by 40 array of 1,500 light-sensitive microphotodiodes.
这个被植入的薄片，大小是3乘3.1毫米，由一组38乘40的1500个光敏微成像二极管组成。
They differ in their size (80 and 92 mm), their rotational speed and the airflow generated.
他们在规模(80和92毫米不同)，其转速和气流产生的。
Size error should be less than 1 mm.
规格尺寸误差应小于1毫米。
Honda carry unique "MM" design, the new Fit for a limited size, creating the largest space.
秉承本田独有的“MM”设计理念，新飞度在有限的尺寸里创造了最大的空间。
On the lateral panel we have one fan (standard size 200 mm) with air filter.
关于横向小组，我们有一范（标准尺寸200毫米）与空气过滤器。
Clean sand requirement, there should be no sawdust, stones and other sundry, particle size between 1 ~ 2 mm, Fried dry before use.
砂粒要求洁净，不应有木屑、石块等杂物，粒径在1 ~2毫米之间，使用前要炒干。
We require 32 mm and very other size carbon rods. Kindly contact to us.
我们求购32毫米和其他尺寸的碳素棒，请联系。
The minimum feature size for printing with Metals is 3 mm.
用于金属打印的最小特征尺寸为3毫米。
The investigators reported that components larger than 50 mm had a lower risk for failure than the smaller components, with men and women having similar risks of failure after adjusting for size.
调查者门报道了对于使用小球头的男性，大于50毫米的的球头更不容易失败；
The minimum feature size for printing with SLS Nylon is 1 mm.
使用SLS尼龙打印的最小特征尺寸为1毫米。
With the fan, the whole unit will extend to 114 mm in height. The weight of the unit is moderately light considering its size.
加入风扇，整个高度上提升为114毫米，重量也都非常适中搭配整个散热器尺寸。
玻璃珠大小2毫米。
The minimum feature size for printing with High Detail Resin is 1 mm.
高精度树脂打印的最小特征尺寸为1毫米。
Condensed file size, now MM USES less storage space than ever!
简明文件的大小，现在的MM使用的存储空间比以往任何时候都少！
Currently, only 15% of lung tumors are found when they are small solitary pulmonary nodules in the 9-14 mm size.
当前，只有15%的肺癌患者能够在肿瘤实体大小为9 ~ 14毫米的时候发现。
The mean size of these lesions was 14 mm and 54% were nonpalpable.
这些病变的平均大小为14mm，54%是无法触诊的。
Best size of the case is: 470 mm as length, 350 mm as width and 590 mm as height.
该箱体的最佳尺寸是：长度为470毫米、宽度为350毫米、高度为590毫米。
For everyone to the commodity cognitive more different, if you are to quality, color, size is very exquisite mm, build you to generally have outlets shop purchases.
因每个人对商品的认知多有所不同，如果您是对品质、色差、尺码很讲究的MM，建您到一般有门市的店购买。
In general, MEMS devices are mm size in overall and um size in local. Thus, the testing technical is required to have high spatial resolution and large field of view.
一般来说，MEMS器件具有毫米级的整体尺寸和微米级的局部尺寸，因此，测试技术要求尽可能同时具有大视场、空间分辨率高的性能。
The maximum size of the work is restricted to A5 (210x150 mm).
工作的最大尺寸的限制，以A 5 (210x150毫米)。
The size of the hole away from the plate edge should be not less than 40 mm, all the hole diameter should be greater than the bolt diameter, heat bilges cold shrink to fit the board.
孔离板材边缘的尺寸应不少于40mm，所有钻孔直径应大于螺栓直径，以适应板的热胀冷缩。
When bolt size are M30 and over, metric fine screw threads of 3 mm pitch series shall be used.
如果螺栓尺寸为m 30或以上，公制螺纹螺旋间距应为3mm。
For charcoal gasifier, charcoal with size ranging from 10x10x10 mm to 30x30x30 mm is quite suitable.
对于气化炉木炭，木炭大小不等，从10x10x10毫米至30x30x30毫米，是相当适合的。
Results. The optimum element size was 2 mm.
结果：最佳元素大小是2mm。
This new method is greatly improved the reading distance(more than 1 000 mm), and can be cooperated with large size of oscillation coil.
此方式大大的提高了读卡距离，配合大尺寸的振荡线圈读卡 距离超过了1 000 mm。
Four interchangeable outer collimator helmets with beam channel diameters of 4, 8, 14, and 18 mm are available for irradiating different size volumes.
有四种可互换的平行盔状平行光管粒子管道可形成不同尺寸的治疗区域，它们的直径分别为4,8,14,18毫米。
Referral for polypectomy during OC was offered for all CTC-detected polyps of at least 6 mm in size.
在OC筛查中息肉切除的参考指标为CT C检测息肉至少为6mm体积。
Referral for polypectomy during OC was offered for all CTC-detected polyps of at least 6 mm in size.
在OC筛查中息肉切除的参考指标为CT C检测息肉至少为6mm体积。
应用推荐