Spray cooling is an efficient method for high heat flux removal.
喷雾冷却是一种高效的高热流密度散热方式。
Using these experimental results, heat transfer performance in spray cooling can be optimized.
根据以上实验结果可以最优化喷雾冷却性能。
To this question, this study paper is to do air temperature accumulation and spray cooling in Chongming tunnel.
针对这一问题，本文对隧道内空气累积温升进行深入的研究，并提出在隧道内采用喷雾降温。
Cross flow is widely used in spray cooling, spray dust, spray drying, spray silencers and other industrial fields.
横向流雾化广泛应用于喷雾冷却、喷雾除尘、雾化干燥和喷雾消声等工业领域。
In cutting principle and actual application, the spray cooling has better effect in cooling and has value to generalize.
从冷却原理及实际应用效果两方面都说明，喷雾冷却具有较好的切削区冷却作用和推广价值。
On this basis, the key completed tank foam fire extinguishing system design and area oil spray cooling system design area.
在此基础上，重点解决了油罐区泡沫灭火系统设计和油罐区喷淋冷却系统设计。
Water Spray cooling of the high temperature plat plate was presented by using Finite Element Coupling numerical simulation.
利用有限元耦合场数值模拟计算方法进行了高温平板纯水喷雾冷却的模拟。
Essentials in design and development of instrument and automatization in this set of spray cooling system are introduced...
根据本人的设计经历，简要介绍这套喷雾冷却系统中仪表和自动化方面的设计开发要点。
A centralized spray cooling system for farm buildings was developed and tested under a practical production condition in summer.
研究开发了一种用于农业建筑的集中雾化蒸发降温系统，进行了实际生产条件下的夏季降温试验。
The metallurgical parameters of the conventional recirculating water cooling and the spray cooling molds have been calculated respectively.
并数值计算了普通循环水冷结晶器与喷淋冷却结晶器的冶金参数。
The utility model relates to a spray cooling tower for resolving the problem of current spray cooling tower as poor heat insulation effect.
本实用新型涉及一种喷雾式冷却塔，解决的是现有的喷雾式冷却塔，围板隔热效果差的问题。
Spray cooling is an efficient cooling techniques, which offers the ability to remove high heat fluxes, and provides uniform device temperatures.
喷雾相变冷却是一种高效的冷却技术，具有高热流密度的冷却能力和严格的温度控制能力。
Both the thickness of liquid film and the reverse movement of steam and liquid droplet influence the effect of heat transfer during spray cooling.
喷雾冷却时，液膜厚度过大和蒸汽与液滴的逆向运动都会影响沸腾的换热效果。
Traditionally, the mathematical model for the specifications and optimization of spray cooling in continuous casting of steel is based on the effective conductivity model.
通常制定和优化二冷制度的数学模型基础是有效导热凝固模型。
In this paper, with high speed camera, the visualization experiments for the heat transfer characteristics of spray cooling on rectangle capillary microgroove groups surface were carried out.
本文利用高速摄影仪对具有矩形毛细微槽群结构的加热表面进行喷雾冷却的传热特性进行了可视化实验研究。
A spray cooling system is thus set up for simulation in lab to test the step signal from the conventional, integral separated and fuzzy self-adaptive PID controllers and the simulated casting.
因此，设立一个喷雾冷却系统模拟实验室测试的阶跃信号的传统，积分分离模糊自适应PID控制器和模拟铸造。
Critical areas of wide slab caster design will be examined including mould steel flow conditions, mould design, strand guide support design, secondary spray cooling design and caster automation.
宽板坯连铸设计的关键在于结晶器内的注流状况，结晶器、铸坯导向段的支撑和二冷喷淋的设计以及连铸自动化。
The utility model can spray cooling liquid into the vortex compressor in the process of the operation of the vortex compressor, the reliability and the efficiency of the compressor can be improved.
本实用新型可以实现在涡旋压缩机工作的过程中，向涡旋压缩机中喷入冷却液，提高压缩机的可靠性和效率。
Air -, spray - and conduction cooling build options are possible to allow deployment in the harshest military and aerospace environments.
空气、喷雾和传导冷却方案让它们可在恶劣的军事航空航天环境中部署运行。
Applications include: Dust control, spray drying, humidification, odor control, product coating, product cooling, and gas cooling.
应用包括：尘埃控制、喷雾干燥、加湿、气味控制、产品涂层、产品冷却和气体冷却。
This paper calculates the temperature of inlet air, and analyzes precedence of gas turbine inlet air-cooling by water spray evaporative cooling in Xinjiang area.
对进气空气的温度进行分析计算，并通过计算的结果分析在我国新疆地区燃气轮机采用喷雾蒸发冷却方式冷却进气空气的优越性。
Advanced air mist cooling technology is adopted and the original control system is modified in order to remedy the unsatisfying part of the spray water control system of the imported caster.
针对原进口连铸机喷淋水控制系统的不足之处，采用先进的气雾冷却技术，对原有的控制系统进行改造。
Ways of designing and calculation on the fixed Extinguishing cooling water spray system of spherical tanks, based on formulas summarized in the design work.
结合在工作中稚导的计算公式，介绍了球罐固定消防冷却水喷雾系统的设计步骤与计算方法。
It is an adiabatic, humidification, and cooling process for gas turbine inlet air by water spray evaporative cooling.
对燃气轮机的进气采用喷雾蒸发冷却的方式降温是一个绝热加湿冷却过程。
It is an adiabatic, humidification, and cooling process for gas turbine inlet air by water spray evaporative cooling.
对燃气轮机的进气采用喷雾蒸发冷却的方式降温是一个绝热加湿冷却过程。
应用推荐