• Best upgrade for FF03 is metal spur gear mount!

    最佳FF 03升级金属齿轮芒!

    youdao

  • Drive with submersible motor via coaxial spur gear.

    潜水电机通过同轴齿轮驱动

    youdao

  • The relative sliding ratio formulas of an involute internal spur gear pair are developed.

    推导了渐开线齿轮相对滑动计算公式

    youdao

  • Experiments with 6105qa diesel engine spur gear cover have shown that the method is effective.

    6105QA柴油机正时齿轮罩盖实验表明其正确性。

    youdao

  • Laws of the deformation force during radial extrusion of spur gear are simulated by using UBET.

    利用上限(UBET)模拟了圆柱齿轮径向挤压过程变形规律。

    youdao

  • Used part of the rotor pump is a simple spur gear drive motor, electric screw fixation using pin.

    部分转子泵采用简单的直齿轮驱动电机电机采用地脚螺钉固定

    youdao

  • An Involute spur gear enveloping worm drive which is a new type of worm drive is described in this paper.

    本文所述渐开线齿轮包络蜗杆传动一种新型蜗杆传动。

    youdao

  • Spur gear (SGA) or compound bevel gear (BGA) attachments can be provided in any position shown in Figure 1.

    如果采用正齿轮(SGA)复合伞齿轮(BGA)附件,则可以1显示的各个位置安装手轮。

    youdao

  • Study on the new inner planar moving spur gear typed epicyclic gear transmission with few teeth difference;

    介绍一种新型斜盘式锥齿齿行星传动的传动比、角速度角加速度等分析计算

    youdao

  • Precision forging of spur gear is an important process used for manufacturing complex high-quality components.

    齿圆柱齿轮锻成形一种高精度的复杂成形工艺。

    youdao

  • The experimental results show that it is feasible to machining the spur gear with superplastic extrusion process.

    试验结果表明超塑挤压的方法加工圆柱直齿轮可行的。

    youdao

  • The graph of relation between inherent frequency of internal spur gear and its structure parameters are obtained.

    方法是分析齿轮固有频率相对齿轮结构参数的变化率。

    youdao

  • The high frequency induction hardening can't raise the surface microhardness of the cold precision forging spur gear.

    高频感应淬火不能达到硬化齿圆柱齿轮齿面的目的。

    youdao

  • This article describes an effective method to set up the three-dimensional model for spur gear, helical gear by CAXA.

    介绍了采用CAXA软件创建渐开线直齿轮齿轮模型有效方法

    youdao

  • The precise modeling method for spur gear rack is introduced with an example, and the design principle is also included.

    通过实例阐述了直齿轮齿条精确建模方法介绍了具体的设计原理,将生成的一对齿轮齿条进行标准安装生成啮合模型。

    youdao

  • In this paper, a method of using single laser — beam spiral scanning to treat the tooth surface of standard spur gear is proposed.

    提出标准直齿圆柱齿轮轮齿表面应用激光束螺旋扫描处理方法

    youdao

  • Following the rules of machining and outspread principle of involutes, the mathematical model of spur gear teeth profile is built.

    根据齿轮加工原理渐开线展开原理建立了齿轮齿数学模型

    youdao

  • The plan carrying on the fuzzy reliability optimization design to the spur gear drive will be more economical, reasonable and suitable.

    齿圆柱齿轮传动进行模糊可靠性优化设计,设计出的方案经济合理、适用。

    youdao

  • From the spur gear to the wheel nuts, this is the most efficient and powerful drivetrain available in electric touring car racing today!

    齿轮车轮螺母有效最强大的传动系统电动巡回赛车今天

    youdao

  • There are many methods to design the spur gear in UG, but the spur gear designed with three-dimensional parametric is the most accurate.

    UG环境下渐开线齿轮的三建模方法很多,其中参数化的渐开线三维齿轮建模最为准确方便。

    youdao

  • The cold forging of the spur gear is a complicated three-dimensional forming, and its process and precision are influenced by many factors.

    齿轮成形,属于复杂三维变形,多种因素影响齿轮的成形精度

    youdao

  • Unsuccessful corner filling and excessive deformation force are the main limitations of classical cold closed-die forging of straight spur gear.

    齿形充填不满成形过高齿轮闭式锻造典型方案缺陷

    youdao

  • The motor position is adjustable to accommodate different gears and to allow adjustment of the gear mesh between the pinion and its mating spur gear.

    电机位置可调节适应不同齿轮允许该小齿轮及其配对正齿轮之间的调整的齿轮的啮合。

    youdao

  • Modified gear can break through the limit of spur gear in using. But modified gear must be manufactured with special design tools in some conditions.

    变位齿轮可以有效突破标准渐开线齿轮存在使用局限性,某些情况下必须采用专门设计刀具加工

    youdao

  • The cavity dimension calculation of injection mold of plastic small-module precision cylindrical spur gear and its molding technology are introduced.

    介绍了精密塑料模数直齿圆柱齿轮模具型腔尺寸计算方法成型工艺

    youdao

  • According to the relative position of sub-gear axis parallel shaft spur gear drive, bevel gear drive shaft and intersecting cross-axis helical gears.

    齿轮轴线相对位置平行圆柱齿轮传动、相交轴圆锥齿轮传动交错螺旋齿轮传动。

    youdao

  • Straight bevel gear teeth actually have the same problem as straight spur gear teeth-as each tooth engages, it impacts the corresponding tooth all at once.

    齿锥齿轮齿轮存在同样问题----齿啮合过程中始终存在冲击

    youdao

  • Straight bevel gear teeth actually have the same problem as straight spur gear teeth-as each tooth engages, it impacts the corresponding tooth all at once.

    齿锥齿轮齿轮存在同样问题----齿啮合过程中始终存在冲击

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定