Six combination screw mould, stainless steel mould and rivet mould are products with more stable quality.
六片组合模、不锈钢模具、铆钉模具更是精诚质量优为稳定的产品；
Disign principle, structure and size of steel mould bamboo plywood form and bamboo plywood form are presented summarily.
本文综述了钢竹模板和竹胶板模板的设计原则、模板结构、模板规格及计算方法。
The technics of chemical etching, chemical polishing and chromium electroplating for stainless steel mould were studied.
研究了不锈钢模具板的化学蚀刻、化学抛光和电镀铬工艺。
The technics of chemical etching, chemical polishing and chromium electroplating for stainless steel mould were studied.
采用化学蚀刻法测定了氚在不锈钢材料中的纵向分布。
The article introduces specifically the gravity darn adopts the construction technology of large scale steel mould and the operational main points.
具体介绍重力坝混凝土采用大型钢模板施工工艺及操作要点。
On the other hand, simulate the interference fitting process to get the deformation distribution of the mould cavity by steel mould correlation method.
另一是用钢模比拟法对扁挤压筒预紧装配过程进行模拟，获得了挤压筒内孔型腔变形规律。
About half of all aluminium castings are made using high-pressure die-casting (HPDC), in which a molten aluminium alloy is injected under pressure into a steel mould, or die.
大约有一半的铸铝工艺是高压模铸(HPDC)，在这种工艺中，通过压力将液态铝合金注入钢模，或模具。
My company mainly produces various specifications grilled bending, hydraulic and crafts stainless steel mould, lamp cover mould, washbasin mould and glass furniture mould.
我厂主要生产各种规格烤弯、油压和手工艺不锈钢模具、洗手盆模具、灯饰热弯模具、家私玻璃模具。
Problems: the primary stress to which the surface of the mould is exposed are thermal shock, abrasion and chemical reactions between the liquid alloy and the iron in the steel mould.
问题：压铸模具表面主要面临的问题有热冲击、磨损、液态合金与模具钢的化学反应等。
Based on the three dimensional Finite Element Method (FEM), the temperature and microstructure variations of large scale P20 steel mould during quenching in 3 different processes were studied.
通过建立合适的三维有限元模型，研究了P 20钢大型模具按3种工艺进行淬火时的温度组织变化。
To solve the problem of short service life and poor performance of low melting point alloy mould manufactured by arc spray forming, the manufacturing of stainless steel mould has been presented.
为了解决低熔点材料电弧熔射成形模具使用性能差、寿命低等问题，提出电弧熔射成形制作不锈钢模具的方法。
A stop block is arranged at the base Angle of one side wall of every single-body U-shaped steel mould, and gaps between the stop blocks and the single-body U-shaped steel moulds are equidistant.
每一个单体U型钢模一侧壁底角处，均设有限位块，每个限位块与每一个单体U型钢模一侧壁的间隙均等距。
Imported original axis flow fans, 316l stainless material mould press shaped drying box, real never rust steel from Japan which guaranteeing the running characteristic of whole machine.
日本进口原装轴流风机，316L不锈钢材料模具压形的烘干箱，真正永不生锈，保证了整机的运转性能。
The major equipments are the ladle and the mould. a ladle is a container to hold the molten steel tapped from the steel making furnace.
主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。
So less gas is. given off in the mould than with rimming steel, but enough bubbles form at the top of the ingot to counteract most of the shrinkage.
所以，在钢锭模内析出的气体没有沸腾钢多，但又在钢锭头产形成足够的气泡抵消大部分钢的收缩。
This paper studied liquid steel flow property in mould of super low head slab CC with hydraulic model and mathematics model.
本文应用水力学及数学模型的方法研究了超低头板坯连铸结晶器内钢水流动特征。
The cracking causes of the die casting mould of SKD61 steel were analyzed by chemical composition analysis, mechanical property testing, microstructure examination and fracture analysis.
通过化学成分分析、力学性能测试、金相检验以及断口分析等方法对SKD61钢压铸模具开裂原因进行分析。
Simulating different solidification cooling rate with step-metal mould and sand mould, the effect of solidification cooling rate on microstructure and properties of high boron steel were studied.
利用阶梯型腔金属模和砂型模拟不同的冷却速度，研究了冷却速度对高硼钢凝固组织和性能的影响。
Manufacturing engineer and manager review and approve Mould Block Purchasing Order and Big Tessera Steel Purchasing Order.
制造工程师和制作部经理则分别在<模胚订购清单>和<大肉钢材订购单>审核、批准；
High speed milling of hardened mould steel can not only ensure the quality of the surface that has been processed, but also achieve a high efficiency of production.
模具淬硬钢高速铣削加工既可以保证加工表面的质量，又可以获得较高的生产效率。
The steel in the mould is covered by a thick layer of unreacted flux and these results in favorable thermal conditions in the meniscus area of the mould.
结晶器中的钢液面上覆盖一层厚厚的未反应保护渣导致结晶器弯月面区域处于良好的热状态之中。
The new process of feeding compound aluminum wire to produce the aluminum steel in mould for slab was introduced.
介绍了板坯结晶器喂复合铝丝生产含铝钢的新工艺。
The paper detailedly introduces application technique and tool set-up mould of lincoln weld in steel reel pipe welding.
详尽介绍了埋弧自动焊在钢卷管焊接上的应用技术及工装胎具装置。
Critical areas of wide slab caster design will be examined including mould steel flow conditions, mould design, strand guide support design, secondary spray cooling design and caster automation.
宽板坯连铸设计的关键在于结晶器内的注流状况，结晶器、铸坯导向段的支撑和二冷喷淋的设计以及连铸自动化。
The new technologies include tundish metallurgy, quick-change tundish, steel stream control in mould and soft reduction etc.
采用的新技术包括中间罐冶金、中间罐快速更换，结晶器内钢水流动控制、轻压下等工艺。
The composition of molten steel, cast speed and mould level changing are thought to be main reasons of causing surface longitudinal cracks by analyzing producing data.
对生产数据进行分析，认为钢水成分、拉速和结晶器液面波动等是造成连铸坯表面纵裂的主要原因。
The improvement of slab equiaxed crystal ratio by electric pulse on liquid steel in continuous casting mould at Pan steel slab castor No.
从结晶器施加电脉冲输入能量、钢液过热度、电极间距三方面，探讨电脉冲处理提高铸坯等轴晶率的效果。
The finite element mould of the cast steel cooling stave of blast furnace was established and the initial conditions and boundary conditions were determined.
建立了高炉铸钢冷却壁的有限元模型，确定了冷却壁温度场模拟的初始条件和边界条件。
The finite element mould of the cast steel cooling stave of blast furnace was established and the initial conditions and boundary conditions were determined.
建立了高炉铸钢冷却壁的有限元模型，确定了冷却壁温度场模拟的初始条件和边界条件。
应用推荐