Mainly by the main control box, the electrical control box, show boxes, stepper motor, close to the switch, Switching itinerary, and other related component parts.
系统主要由主控制盒、电机控制盒、显示盒、步进电机、接近开关、行程开关等相关部件组成。
Stepper motor driver head the list of output devices.
步进马达驱动器在输出设备中排在首位。
A stepper motor, which can be turned a degree at a time, would twist the wand back and forth as needed.
至于一次可以转一度的步进马达，会在必要的时候来回推动百叶窗的控制杆。
In this paper, microcontroller, stepper motor driver chips, character LCD and keypad array, build a set of stepper motor controller and driver as one of the stepping motor control system.
本文应用单片机、步进电机驱动芯片、字符型LCD和键盘阵列，构建了集步进电机控制器和驱动器为一体的步进电机控制系统。
This paper discusses a minimum of parameters to determine the trajectory of a circular interpolation method and the method of frequency control stepper motor.
文中讨论了一种以最少参数确定一条圆弧轨迹的插补方法和步进电机变频调速的方法。
The odometer is mechanical, driven by a stepper motor .
里程表为机械式，由一个步进马达带动。
The odometer is mechanical, driven by a stepper motor.
里程表为机械式，由一个步进马达带动。
Stepper motor is a motor controlled by digital signal, which converts pulse signal into Angle displacement. The wheeling speed is controlled by the frequency of pulse signal.
步进电机是一种数字控制电机，它将脉冲信号转变成角位移，电机的转速由脉冲信号频率决定。
The scanning mechanical device, including a bracket and the rotation axis, driven by a stepper motor.
扫描机械装置包括支架和旋转轴，由一个步进电机驱动。
The device creates dynamic air supply with stepper motor driving flow distribution plates.
该装置用步进电动机带动分流板产生动态风。
The operation of the stepper motor control the speed of paper, stepper motor if the device is not in place, the same will lead to abnormal paper speed.
步进电机的运转操控着走纸的速度，步进电机假如装置没有到位，同样会到致使走纸速度反常。
It's introduced that the controlling system in raising and reducing speed of stepper motor that is based on core controller, TMS320LF2407A, communicates with PC, as well as the method of programming.
本文介绍了以TMS320 LF 2407a为核心控制器的步进电机自动升降速控制系统与PC机的通讯及程序设计方法。
Finally, the stepper motor control system application examples.
最后给出了步进电机控制系统的应用实例。
Stepper motor control system has been developed using the software and hardware co-simulation method, can effectively reduce the system development cycle and cost.
步进电机控制系统的开发采用了软硬件协同仿真的方法，可以有效地减少系统开发的周期和成本。
A type of software allotting pulses method for stepper motor has been presented in the paper.
本文介绍了一种步进电机软件脉冲分配的方法。
Stepper motor drivers head the list of output devices.
步进马达驱动器在输出设备中排在首位。
It can be optional equipped with photocell correction device, imported stepper motor traction and image - character register to optimize packing grade.
可另配光电检测校正装置，配进口步进电机牵引，图文对版印刷包装，优化包装物档次。
Proficient in PLC programming (Siemens), human-machine interface touch screen, frequency converter, servo driver, stepper motor.
精通PLC编程（西门子、三菱），人机接口触摸屏、变频器、伺服驱动器、步进电机。
This paper introduced the design of one stepper motor driver using dedicated chip L6506.
介绍了一种采用专用芯片L6506的步进电机驱动器设计。
It has profound significance in the development, research and application of the digital valve which USES stepper motor as its driver.
这对于用步进电机作为驱动装置的数字阀的开发研究与应用具有深远的意义。
In this paper, the study for the two-phase hybrid stepper motor as a position sensor is investigated.
针对二相混合式步进电机固有的特点，对其作为连续角位移测量传感器进行了深入的研究。
The thesis analyses the work principle and operating characteristics of hybrid stepper motor.
论文分析了混合式步进电动机的工作原理和运行特性。
With the stepper motor and gear train of the fault, should be clean, remove foreign bodies, refuel it.
碰到步进马达和轮系的这些故障，都应进行清洗，清除异物，重新加油才行。
In this design, the lead screw and stepper motor assembly of the connection, as well as the painting is an important place.
在这个设计中，丝杠与步进电动机的连接以及装配图的绘画都是重要的地方。
Based on the design of the stepper motor control MCU.
本设计为基于单片机的步进电机的控制。
On this base, introducing the stepper motor subdivided drive circuit simply.
在此基础上对步进电机细分驱动电路作了简单的介绍。
This paper introduces a kind of stepper motor driver with the key of MCU C8051F020.
介绍一种利用C8051F020单片机为控制核心的步进电机驱动器。
Rotate frequency conversion regulating speed, drive servo motor or stepper motor, drive ball screw.
旋转变频调速，驱动伺服电机或步进电机，传动滚珠丝杆。猈。
Rotate frequency conversion regulating speed, drive servo motor or stepper motor, drive ball screw.
旋转变频调速，驱动伺服电机或步进电机，传动滚珠丝杆。猈。
应用推荐