After cemented carbide brazed is quenched and tempered, the strength of welding stam descend obviously.
硬质合金钎焊后进行淬火、回火处理，焊缝强度明显下降。
And there is a distinct difference between the shear strength of welding seams with different implantation fluence.
且注入剂量不同，其焊缝的剪切强度存在着较大差异。
Its results show that with decreasing the relative width of under-matching weld metal, the tensile strength of welding joint increase.
结果表明：随低强焊缝金属相对宽度变小，接头抗拉强度增大；
The paper discusses over the influence exerted by welding residual stress on the static strength, brittle fracture and stress-corrosion cracking of metal structure.
本文介绍了焊接残余应力对金属结构的静强度、脆性断裂以及应力腐蚀开裂的影响。
Therefore, the steel is mainly used for low temperature impact of the impact of the components, welding structure and other requirements of higher strength components.
因此，镇静钢材主要用于低温下承受冲击的构件、焊接结构及其他要求强度较高的构件。
The quality of resistance spot welding of low carbon steel and high strength low alloy steel is studied by looking into the dynamic voltage characteristics of the electrodes.
本文通过对电阻点焊电极电压动态特性的分析，研究了低碳钢及低合金高强度钢电阻点焊的质量问题。
Material for rail of crane is of strong strength because of high carbon content, but of poor weldability, which makes more cracks. Strict technique is required in such welding.
吊车轨道的材料由于其含碳量较高，强度大，可焊性较差，焊接时容易产生裂纹， 因此要严格按照工艺执行。
Electric welding machine cable [1] (YH cable) full of high strength rubber sleeve electric welding cable, commonly known as welding wire, is a YC cable (general rubber cable).
电焊机电缆[1]（YH电缆）全称高强度橡套电焊机电缆，俗称焊把线，是YC电缆（通用橡套电缆）的一种。
This paper analysed and calculated the dynamic yielding strength of plastic deformed metal in the bonding zone of explosive welding composite material in the condition of explosive welding.
用比拟的方法分析和计算了爆炸焊接条件下，爆炸复合材料结合区中塑性变形金属的动态屈服强度值。
The twice impulse process is employed to change the metallic structure of the resistance welding so as to improve the welding strength.
应用二次脉冲电流，改变电阻焊熔核的金属组织结构，达到提高焊接强度的目的。
The present paper mainly introduces the applied technologies of the high strength automobile sheets such as press forming, welding and surface treatment etc.
主要介绍诸如加工成形、焊接和表面处理等高强度汽车板的各种应用技术；
Laser welding thin wall bit is characterized by high welding strength of bit teeth, no falling out of the teeth and mass production by non water dry drilling.
激光焊接薄壁钻头的显著特点是钻齿焊接强度高，不掉齿，可以用于无水干钻，便于实现大批量规模化生产。
So it is essential to reinforce quality control and improve welding procedure in order to ensure the structural strength of bogies.
因此改善焊接工艺，加强质量管理，是保证焊接转向架结构强度的关键。
Suitable for welding of critical structures of low carbon steel and low-grade strength of low alloy.
用于焊接较重要的低碳钢结构和强度等级较低的低合金钢。
Interface bonding strength of clad transition joints welded in two different welding procedures is compared and a proper welding procedure is determined.
对两组不同焊接规范下复合过渡接头的界面结合强度进行了对比，确定了合适的焊接工艺参数。
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊。
The suitable welding material and the rational welding parameters were confirmed by welding procedure test of high strength weather resistant steel. It was successfully applied to the production.
通过对新型高强度耐候钢材进行焊接工艺试验，匹配合理的焊接材料，确定了合适的焊接工艺参数，并成功地应用于产品的焊接生产。
The effect of welding process on the microstructure and the strength of welded joint is discussed in the present paper.
探讨了焊接工艺过程对气压焊焊接接头显微组织及强度的影响。
Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.
硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用。
Through experiments in welding, the paper has proved its excellent properties from the effects of welding technology, mechanical strength to electric conductivity etc.
本文通过焊接试验研究，从焊接工艺效果、机械强度、导电性能等方面证明了这种新型钎焊料的优异特性。
The effect of electromagnetic force on the splash, joint strength and welding process of capacitor discharge projection welding is studied.
研究了焊接过程中焊接电流产生的电磁力对电容储能凸焊喷溅、接头强度及焊接工艺的影响。
Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.
铝锰，强度高，耐蚀。铝合金焊接用。
The effects of welding force and welding electric current on the tensile strength of mash seam welded joints in the interstitial-free (IF) steel have been studied.
研究了焊轮压力和焊接电流对无间隙原子钢(if钢)压平缝焊接头抗拉强度的影响。
But the mechanical properties of weld joint have influence on selection of welding technology and welding material, and on strength calculation of construction.
而接头性能直接影响着结构焊接工艺的选择和强度计算。
The results show the weld has good properties in strength and toughness satisfying the welding demands of pipeline.
研究结果表明，焊缝具有优良的强韧性匹配，焊接接头强度及冲击韧性均满足管线钢工程焊接技术条件。
In the design of thin-walled spot welding structures such as the automobile body structure, it is necessary to evaluate the fatigue strength of spot welding at the good accuracy.
在设计汽车骨架等薄壁点焊结构时，必须对薄壁构件焊点的疲劳强度进行精确评估。
Iron nickel high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron such as cylinder cap.
镍铁，强度高、塑性好。重要灰铸铁及球铁焊补用，如汽缸盖。
Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.
铝青铜，耐磨、耐蚀，强度高。铜合金焊接或堆焊用。
Silicon bronze, corrosion resistance high strength. Welding of copper, silicon bronze brass.
硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用。
The result of welding experiment and production practice show that the welded rear-axle housing have quality stability and high precision and fatigue strength.
通过试验和生产验证，所焊接的后桥壳体精度高、抗疲劳性能好、质量稳定。
应用推荐