Laser oxidizing for titanium surface hardening was studied.
研究了钛及其合金的激光渗氧硬化方法。
Experiment has shown that it has good effect on partial surface hardening.
试验证明这种发生器对材料的表面局部硬化非常有效。
Induction surface hardening of the workpiece material is usually carbon steel.
感应加热表面淬火的工件材料一般为中碳钢。
Now the surface treatment methods are surface hardening, tufftride, plasma CVD, etc.
目前常常用的表面处理方法有表面淬火、软氮化和等离子CVD等。
A new laser surface hardening technology of aluminium alloy was examined in this paper.
研究了一种新的铝合金激光表面强化工艺。
Under these circumstances there would always be some finite depth of surface hardening regardless of size.
在这种情况下不管零件尺寸如何，其表面总归有一定深度被硬化。
This paper introduces the applications of the very high power laser in the surface hardening of materials.
本文介绍大功率激光器在材料表面强化中的应用概况。
The Super carburization process can provide outstanding performance in the surface hardening of high-alloyed steel.
过渗碳处理可以有效提升高合金工具钢的表面特性。
This paper briefly introduces the principle, the advantages, and the use of plasma arc surface hardening technology.
本文首先简要介绍了等离子弧表面强化处理技术的原理、优点和用途。
Generally used in quenched and tempered state, can also carry on the carbonitriding and high-frequency surface hardening.
一般在调质状态下使用，还可以进行碳氮共渗和高频表面淬火处理。
Derusting, oxide skin removing and surface hardening for copper castings, sheet metal, stainless steel strips, aluminum castings.
铜合金铸件，薄板、不锈钢带、铝合金铸件除锈、除氧化皮及表面强化。
The al concentration distribution in aluminized layer, microstructure and some properties of surface hardening layer were studied.
用渗铝-内氧化技术对纯铜进行了表面弥散硬化处理。
The results indicated that using laser surface hardening could remarkably improve the wear resistance of Febased sintered materials.
结果表明，经宽带激光表面处理后，铁基烧结材料的耐磨性显著提高。
Process parameters were found to obtain optimum effect of surface hardening, according to material property and technology requirement.
可根据材料的特性及技术要求，通过改变工艺参数得到理想的加工表面。
Figure induction coil surface hardening of medium frequency current flowing through the great but will heat the surface of the workpiece.
表面淬火如图感应线圈流过很大的中频电流而将工件表面加热。
The grind-hardening is a new technology that integrates grinding and surface hardening and enhances material capability of workpiece surface.
磨削强化技术是利用磨削加工过程中产生的大量磨削热对工件材料进行表面热处理的新工艺技术。
In this paper, the xenon lamp radiation light beam surface hardening technology, which was developed abroad in the early 1990's, was summarized.
本文介绍了国际上90年代初新兴的氙灯辐射聚焦光束表面强化技术。
The most commonly used heat treatments on metals are softening annealing, quenching, normalizing, surface hardening treatment, precipitation hardening.
最常见的热处理包括软化退火、淬火、正火、表面强硬化、淀积硬化。
Effects of process parameters of plasma beam surface hardening treatment on hardening layer of boron cast iron and its microstructure and properties are investigated.
研究了等离子束表面硬化工艺参数对硼铸铁淬硬层及其组织与性能的影响。
The study shows that there exist remarkable Ti catalysis effects, which can increase the depth of a nitrided layer, enhance its surface hardening and nitrocarburize rapidly.
研究结果表明；钛催渗具有明显的催渗效果，可使氮、碳原子的渗入速度显著加快，提高渗层深度和渗层硬度。
The reasons causing distortion of machine tool slide guide during surface hardening was analyzed and the way to reduce distortion was offered and the good result is obtained.
对机床导轨表面淬火畸变的原因进行了分析，提出了控制机床导轨表面淬火畸变的措施，应用效果明显。
Against the machined parts and tools. companies of the two categories and more than 10 minutes surface hardening technology to ensure accurate meet the different needs of customers.
针对不同的被加工零件及工具，公司采用了两大类及十几种表面硬化技术，以保证准确满足广大不同需求的客户。
The dynamic process of metal cutting is simulated by using FEM software ANSYS. At the same time, the deformation graphics of surface hardening and its numerical solution are obtained.
利用有限元软件A NSYS模拟出了金属切削的动态过程，同时获得已加工表面的加工硬化变形图及其数值解。
The laser hardening technology used for crankshaft is introduced and the investigation on surface hardening of a nodular iron crankshaft was carried out by using a kW CO 2 laser system.
本文介绍了曲轴激光淬火强化技术，采用千瓦级快速轴流式激光器对球铁曲轴进行了激光淬火试验。
The paper also briefs the nozzle or moving blade surface hardening treatment technology, including plasma spraying and diffusion layer for preventing the nozzle and moving blade from SPE.
文章还介绍了为预防汽轮机喷嘴和动叶片免受固体颗粒侵蚀所采用的表面硬化处理技术，包括等离子喷涂层和扩散渗层在内；
The working principle, structure and parameters design of plasma arc generator for heat treatment are described. Experiment has shown that it has good effect on partial surface hardening.
论述了用于金属材料表面热处理的等离子弧发生器的工作原理、结构特点和参数设计。试验证明这种发生器对材料的表面局部硬化非常有效。
Grinding hardening, the technology of hardening steel piece surface with grinding heat instead of high or medium frequency induction hardening heat, can integrate grinding surface hardening.
磨削强化处理技术是利用磨削热替代高、中频感应淬火热源对钢件表层进行强化处理，将磨削加工与表面强化合为一体。
Processing technology to shore up the axle, the right rail Induction surface hardening is a key process, quenching determines the quality of care dealing with the use of effects and life axle.
在托轮轴的加工工艺中，对钢轨表面的中频感应淬火是一道关键工序，淬火处理的质量决定了托轮轴的使用效果和寿命。
Processing technology to shore up the axle, the right rail Induction surface hardening is a key process, quenching determines the quality of care dealing with the use of effects and life axle.
在托轮轴的加工工艺中，对钢轨表面的中频感应淬火是一道关键工序，淬火处理的质量决定了托轮轴的使用效果和寿命。
应用推荐