Thus, the discharge and free surface profile can be adjusted simultaneously.
从而解决了同时调整流量和自由面的困难。
Their surface profile closely matches the raceway profile of the outer and inner rings.
它们的表面轮廓最接近内外圈滚道。
Thus, testing the surface profile in vacuum or environmental Chambers is of significance.
因而，在真空或特定气氛下进行表面形貌测试具有重要的意义。
The result achieved in this way agrees well with the surface profile of the object measured.
按该方法处理得到的结果与实际物体的形貌特征吻合。
The chemical character and surface profile of the polymer film was studied using FTIR and SEM.
利用红外光谱法(FTIR)、扫描电镜(SEM)对该聚合膜进行了化学成分和表面形貌的分析。
The principle of the new method is based on the phenomenon of light modulated by surface profile.
对光学针描法的理论基础， 如表面轮廓调制原理和光耦合区理论进行了较为深入的分析。
A new method for calculating the space surface profile error based on genetic evolution algorithm is proposed.
提出一种计算空间面轮廓度误差的新方法。
High energy, high resolution optical system put forward new demand for traditional analysis of surface profile.
高能量、高分辨力光学系统给传统的光学面形评价指标提出了新的要求。
This property provides a controlling of surface profile of micro(optical) elements fabricated with photoresists.
此特性使得该类抗蚀剂可用于微光学元件加工，并可对其表面形状进行控制。
The instrument is suitable to measure curved surface profile appearance of various parts of the rolling bearings.
该仪器适合滚动轴承各类零件曲面轮廓形貌测量。
The backwater surface profile of Chongqing section ends at Jiangjin after formation of the Three Gorges Reservoir.
三峡水库成库后，重庆河段回水曲线受库区水位影响，至江津才尖灭。
The methods for selecting penta prism and reducing the effect of surface profile error on detection are introduced.
介绍了选择五棱镜的方法和减小面形误差影响的方法。
A contact surface profile measurement system which is based on white-light interference measuring technique is proposed.
提出了一种基于白光干涉测量技术的接触式表面形貌测量系统。
Precise measurement of surface profile of liquid is one of key problems for fabrication of aspherical lens liquid micro-lens.
对液滴透镜面形的精确测量是用液滴法制作非球面液滴透镜的关键问题之一。
Study on error online measurement for complex curved surface profile error of skew roller based on error separation technique;
提出了一种基于遗传算法和自适应的计算平面线轮廓度误差的新方法。
The on-line measure of roll profile is the measure to the surface profile of roll under the condition that mill operates normally.
辊型在线检测是指在轧机正常运转的情况下，对轧辊的表面形状进行检测。
This paper describes a new method, Doppler heterodyne measurement method of surface profile, using a simultaneous phase comparator.
本文提出了一种新的方法，多普勒外差法测量表面面形，并首次提出和制作了同步相位计。
The mathematical models of surface profile as well as dividing the instrument error and the measurement interference are established.
本文还建立了表面轮廓和分离表面轮廓测量干扰及仪器误差的数学模型。
The mathematical expression for the surface profile was put forward based on the analysis on the mechanism of forming for shadow mask.
通过对荫罩成形机理的分析，提出了荫罩表面型面的数学表达式。
Steady water surface profile of gradually varied flow can be calculated using either a steady flow approach or an unsteady flow approach.
使用计算机计算明渠恒定渐变流水面曲线有两种分法：恒定流方法和非恒定流方法。
The definition of surface profile tolerance and the different measure method of surface profile tolerance error are introduced in this paper.
介绍了面轮廓度公差的定义及面轮廓度误差的各种测量方法。
The vibration characteristics of external plunge grinding and the ground surface profile error are investigated through experiments analysis.
在实验的基础上，对磨削过程振动特征以及由此产生的磨削表面形貌误差进行研究。
By the means of surface profile equipment, the machined surface was measured and the statistical parameter of surface topography was calculated.
通过表面轮廓仪测量加工试件表面形貌，采用自行研制的表面形貌参数表征系统进行表面形貌统计参数计算。
System structure and algorithm used in the measurement of 3d surface profile are presented while using the light bulb phase-shift interfering m...
提出了用白光相移干涉法进行三维表面轮廓测量应采用的系统结构和算法。
System structure and algorithm used in the measurement of 3D surface profile are presented while using the light bulb phase-shift interfering method.
提出了用白光相移干涉法进行三维表面轮廓测量应采用的系统结构和算法。
The phase signal of the surface profile is detected from the sinusoidal phase-modulating interference signal using a real-time phase detection circuit.
利用实时相位检测电路，从正弦相位调制干涉信号中解出被测量物体表面形貌的相位。
A sinusoidal phase-modulating (SPM) laser diode (LD) interferometer for real-time surface profile measurement is proposed and its principle is analyzed.
提出一种实时测量表面形貌的正弦相位调制半导体激光干涉仪。
The application of copying method in indirect measurement of positional tolerance and surface profile is introduced and several examples are given as well.
通过实例，简要介绍了印模法在间接测量形位公差及表面形态方面的应用。
The application of copying method in indirect measurement of positional tolerance and surface profile is introduced and several examples are given as well.
通过实例，简要介绍了印模法在间接测量形位公差及表面形态方面的应用。
应用推荐