Test results showed that the optimized pickling process could clean oxide skin of weld surface in effect and improve pitting-resistance property greatly.
研究结果表明，采用本文中的酸洗工艺可以有效清除不锈钢焊缝表面的氧化皮，并改善其耐点蚀性能。
This test method covers the resistance to the formation of pills and other related surface changes on textile fabrics using the random tumble pilling tester.
本标准主要描述了乱翻滚式测试仪，对纺织品材料抗起球性能和有关织物表面变化趋势的评价。
The specimen after test can be judged the resistance by the loss or surface.
可依重量损失或表面磨损状况判定耐磨等级。
The test indicates that contact fatigue life and wear resistance of surface quenched casting steels and Bainite quenched spherical cast iron are increased largely.
试验表明：经过表面淬火的铸钢和经过贝氏体淬火的球墨铸铁，其接触疲劳寿命和耐磨性大幅度提高。
The test results showed this material had proper hardness, free of ridging defect on the surface, and had a stronger corrosion resistance to chloride than that of SUS430 steel.
试制结果显示该材料的硬度适中、抗皱性好并且抗氯化物腐蚀能力比SUS430钢强。
Often, the purpose of the contact resistance test is to determine whether contact oxidation or other surface film buildup has increased the resistance of the device under test.
通常，测试接点电阻的目的是确定接触点氧化或其它表面薄膜积累是否增加了被测器件的电阻。
Surface temperature on gear teeth was measured by dynamic thermocouple method. A test gear construction consisting of three pieces and electric resistance was designed.
用动态热电偶法测量齿面闪温分布，设计制造可测出全齿面闪温的三片组合带电阻式齿轮结构。
Through permeability resistance test, sulfate corrosion test and abrasion resistance test, the relationship of construction techniques, concrete surface quality and durability was reached.
通过混凝土抗渗性试验、抗硫酸盐腐蚀试验和耐磨性试验，得出施工工艺和混凝土表面质量与混凝土耐久性的关系。
The salt spray test results of piston rods with different surface qualities showed that superfinish process of piston rods before plating can improve corrosion-resistance of piston rods significantly.
不同表面质量的连杆盐雾试验对比表明：镀前对汽车减振器连杆进行表面超精加工可显著提高连杆的耐蚀性。
Salt spray test machine for a variety of surface materials by electroplating, anodizing, painting, rust-proof oil, anti-corrosion treatment, testing its products on the corrosion resistance.
盐水喷雾试验机针对各种材质之表面经电镀、阳极处理、喷涂、防锈油等防腐蚀处理后、测试其制品之耐腐蚀性。
Very low residue and few causticity, with high-surface insulation resistance value, no need to wash it also can reach the excellent ICT test value.
焊接后残留物少，腐蚀性小，具有极高的表面绝缘阻抗值，无需清洗即可达到极佳的ICT测试性能。
The method is presented to test DC contact resistance of shielding materials' surface.
提出了材料表面接触电阻的测试方法，测试了几种典型材料的表面接触电阻；
The results show that the laser surface melting treatment improves greatly the homogenization, compaction and the corrosion resistance of rare earth permeating layer under the condition of test.
结果表明，在一定条件下，激光熔凝处理可进一步提高纯铁渗稀土层组织的致密性与均匀性，显著提高稀土渗层的耐蚀性。
The surface condition (roughness) of corrosion test sample has a pronounced influence on the pitting resistance of the base metal.
腐蚀试样的表面状态（粗糙程度）对母材金属的耐点蚀性能有明显的影响。
Corrosion resistance of aluminum tube surface with silane-rare earth composite coating was studied by electrochemical means, weight loss and salt spray test respectively.
采用电化学、失重和盐雾实验对铝管表面硅烷稀土复合膜的耐蚀性进行考察。
The thermal shock resistance test indicates that the surface modification cladding is very stable and shows firm adherence.
热稳定性测试表明表面改性层非常稳定并具有良好的结合性。
The thermal shock resistance test indicates that the surface modification cladding is very stable and shows firm adherence.
热稳定性测试表明表面改性层非常稳定并具有良好的结合性。
应用推荐