Surface structured silica hollow microspheres were synthesized using the rape pollen grain as a biotemplate via a facile sol-gel method and a succedent calcinations process.
利用油菜花粉作为生物模板，通过溶胶在花粉颗粒表面包裹，再经高温烧结去除花粉颗粒的方法制备了具有特殊表面形貌的二氧化硅中空微球。
There are various methods to obtain antibacterial surface on stainless steels, such as chemical heat treatment, magnetron sputtering, ion implantation, Sol-Gel, and chemical deposition.
制备表面抗菌不锈钢的方法有化学热处理、磁控溅射、离子注入、溶胶-凝胶和化学沉积。
Objective To study the effect of heat treatment with sol-gel method on the surface of Ni-Cr alloy for PFM after ti coating.
目的探讨溶胶-凝胶沉积钛法中热处理过程对烤瓷用镍铬合金表面钛涂层的影响。
Transparent nano composite film on the surface of glass of hydrophobic property is prepared with sol-gel processing.
采用溶胶-凝胶法在玻璃表面制备出透明的憎水性纳米复合薄膜。
The results indicate the sol-gel prepared HAP has the better adsorbed property for its small and uniform particle size, high specific surface area and activity.
结果表明，溶胶-凝胶法合成出的羟基磷灰石颗粒细小均匀、比表面积大、活性高，具有很好的吸附性能。
For the synthesis of MEC, the novel heterogeneous catalysts have been prepared by dipping, sol-gel and surface-coating technique.
运用浸渍法、溶胶凝胶法和表面包覆法制备了多种的备选固体催化剂。
In this paper, silicon oxidation layer was fabricated on plastic surface using sol-gel method, and the fabricated SiO_2 layer was used to extract DNA.
本文用溶胶-凝胶法在塑料表面制作二氧化硅涂层，并利用制作的二氧化硅层来提取DNA。
Decoration film on glass surface doped with phthalocyanine blue was prepared by sol-gel process using tetraethoxysilane, isopropanol and water as the raw materials.
采用溶胶—凝胶法，以正硅酸乙酯、异丙醇、水为原料制备了掺杂有机颜料酞菁蓝的玻璃表面装饰膜。
Hydrophobic silica gel was prepared by sol-gel process using tetraethoxy silicone(TEOS) as raw material, then the surface was chemically modified by diethoxydimethylsilane(DDS).
以正硅酸乙酯为原料，经溶胶-凝胶过程制备二氧化硅溶胶，再利用二甲基二乙氧基硅烷（DDS）对其进行改性，制备了疏水性二氧化硅凝胶。
Super-hydrophobic silica-based thin films were prepared by sol-gel processing. Both surface energy and roughness were controlled using colloidal silica particles and fluoroalkylsilane.
溶胶— 凝胶法制备超疏水薄膜，加入胶体二氧化硅粒子和氟硅烷控制薄膜表面粗糙度和表面化学性质。
RESULTS AND CONCLUSION:The surface modification methods include plasma spraying, micro-arc oxidation, sol-gel and biomimetic methods.
结果与结论：在表面生物活性改性的方法中，主要有等离子体喷涂法、微弧氧化法、溶胶-凝胶法及生物仿生法等。
Anatase TiO 2 particles were prepared on viscose-based activated carbon fiber (ACF) felts surface via sol-gel method with tetra-n-butyl titanate as precursor and characterized by XRD and SEM.
采用钛酸四正丁酯为原料，用溶胶-凝胶法在粘胶基活性炭纤维(A CF)毡表面制备了锐钛矿型的二氧化钛粒子，并用XRD, SEM进行了表征。
We take a sol-gel-esterification process to get nanometric LiMn 2 O 4 powder which has good electronic and electronic and electrochemical performances with good crystality and surface characteristics.
我们工作中采用了溶胶-凝胶-酯化合成法，在一定的热力学重结晶条件下得到结晶度高、表面性能好的超细晶材料，它具有好的电化学和电学性能。
We take a sol-gel-esterification process to get nanometric LiMn 2 O 4 powder which has good electronic and electronic and electrochemical performances with good crystality and surface characteristics.
我们工作中采用了溶胶-凝胶-酯化合成法，在一定的热力学重结晶条件下得到结晶度高、表面性能好的超细晶材料，它具有好的电化学和电学性能。
应用推荐