Profilometer - a tool that is used for measuring surface topography.
表面形貌剂-一种用来测量晶圆片表面形貌的工具。
Finally, the problem of characterization of surface topography is analysed.
本文最后分析了表面形貌的表征问题。
The more regular is surface topography of fracture 2, 5, 6, the smaller is fractal dimension.
断口2、断口5和断口6外观形貌较规则，分形维数较小。
Focus detection method is one of the primary non-contact measurement methods of surface topography.
聚焦探测法是表面形貌非接触测量中的主要方法之一。
During the simulated experiment of gears running-in, the surface topography of samples are changed.
本文通过齿轮副跑合的模拟试验，得出了齿轮副在跑合过程中表面形貌的变化规律。
Precisely and reasonably modeling for milling process is the key to study milled surface topography.
精确合理的铣削过程模型是研究铣削加工表面形貌的关键。
Wettability and surface topography of modified PU films were measured by contact angle meter and SEM.
用接触角测量仪和扫描电镜观察聚氨酯膜改性前后的表面润湿性和表面形貌的变化；
Atomic force microscope was used to observe the surface topography with different ssDNA concentration.
利用原子力显微镜观察不同浓度的DNA吸附在金膜上的表面形貌。
In this paper, the surface topography of resin bonded grinding wheel was measured by laser 3d scanning.
采用激光三维扫描方法，对树脂结合剂砂轮的表面形貌进行了测量。
Groundwater sapping is the geomorphic reworking of surface topography induced by water seeping out from an aquifer.
地下水出流侵蚀是由含水层中的地下水的涌出所造成的地貌变化。
The surface topography of grinding wheel has great influence on the quality of workpiece and the grinding efficiency.
砂轮表面形貌对磨削表面质量及磨削效率有很大的影响。
But, when relative waviness comes into roughness, only the amplitude effect of surface topography should be considered.
当相对波度为高频的粗糙度时，只需考虑表面形貌的幅值效应。
Our present study was to investigate the corneal posterior surface topography in different clinical stages of keratoconus.
目的分析各期圆锥角膜后表面的形态特点，为完善圆锥角膜形态特点的描述提供参考。
The surface topography of viscoses changed obviously, and the grooves disappeared gradually as the degree of crosslinking increasing.
随着交联程度的增加，纤维的表面形貌变化比较明显，黏胶纤维表面的凹槽逐渐消失。
The fractal theory is introduced and variations of running-in surface topography are characterized by fractal parameters in this paper.
本文引入分形理论，用分形参数表征磨合表面的形貌变化。
Analytical model that used to study the generation of surface topography is based on the principle of swept surface during cutting operation.
解析模型是基于刀具切削刃包络面形成的原理来研究零件表面形貌的形成。
Theoretical calculation results show that real contact area increases with the increases of the load when the surface topography is constant.
理论计算结果表明，表面形貌一定时，真实接触面积随着载荷的增大而增大；
Wettability could be controlled in a rational manner by individually and simultaneously manipulating surface topography and chemical structure.
润湿性能不仅受材料本身性能的影响，同时也受材料表面结构的重要影响。
By the means of surface profile equipment, the machined surface was measured and the statistical parameter of surface topography was calculated.
通过表面轮廓仪测量加工试件表面形貌，采用自行研制的表面形貌参数表征系统进行表面形貌统计参数计算。
So in order to provide the theoretical foundation for the design of rigid disk, it is necessary to research the surface topography of rigid disk.
因此有必要研究硬盘磁盘磁头之间的接触状态，以便为硬盘设计提供理论依据。
Based on the analysis of test results, the effect of both the surface topography and loading frequency on the joint closure behavior is discussed.
通过对试验结果的分析，获得加载频率和表面形态对节理闭合变形性质的影响规律。
It is shown that the fractal parameters are simple and effective to characterize the variations of surface topography during running - in process.
研究表明，磨合表面变化的分形参数表征是简单有效的。
The surface topography and composition of normal coating and spot were investigated by scanning electron microscope and energy dispersion spectrum.
采用扫描电镜结合能谱的测试方法，对热处理前后含铬绝缘涂层中正常涂层和斑点的表面形貌及成分进行了分析。
The research status of surface topography measurement apparatus and characterization methods were introduced, and the development tendency of them was pointed out.
对国内外表面形貌测量仪器、表征方法研究情况进行了阐述，并指出了其发展趋势。
The overlap coefficient experiment of ablation craters is done, then proper overlap coefficient for getting uniform dressing surface topography of wheel is chosen.
进行单脉冲烧蚀凹坑的重叠系数试验，选择出合适的重叠系数，能够使修锐效果均匀。
By applying computer simulation technology, influences of above factors on milling vibration and 3d surface topography of workpiece are analyzed quantificationally.
利用计算机仿真技术，定量分析了上述因素对铣削加工振动和工件三维表面形貌的综合影响。
Results showed that there was not much change on surface topography after modification, just the colour of titanium sheet surface changed from argentite to aureate.
细胞实验结果表明改性后形成的二氧化钛凝胶层能促进细胞在材料表面的伸展和早期黏附。
They were supplemented with surface topography and cross section images by atomic force microscopy and high-resolution transmission electron microscopy, respectively.
他们均附有表面的地形和截面图像原子力显微镜和高分辨率的透射电子显微镜，分别。
Characterization and evaluation of machined surface topography has always being one of the most vital and appealing issues in the area of surface metrology and tribology.
机械加工表面形貌表征和评价一直都是表面计量学和摩擦学领域最重要的课题之一。
Characterization and evaluation of machined surface topography has always being one of the most vital and appealing issues in the area of surface metrology and tribology.
机械加工表面形貌表征和评价一直都是表面计量学和摩擦学领域最重要的课题之一。
应用推荐