The new method is called welded line tangent method which forms a kinematics model for the robot operating in the bent degree based on the judgment of the tacking system.
该方法是根据焊缝跟踪系统判断焊缝的弯曲程度，确定机器人的运动学模型。
By converting test condition to the standard pressure condition, calculation accuracy of average pressure impulse coefficient method is superior to that of tangent method.
换算到标准压强条件下，平均压强冲量系数法的计算精度优于切线法的计算精度，并作出了计算验证。
Two methods have been presented in this paper to treat this case. They are tangent method and minimum equivalent linear damping method. Their relation has been found, too.
为此，本文提出了两种处理方法，即切线法和最小当量线性阻尼法，并找出了它们的关系。
When surveying major diameter and higher hanging pipeline, common trigonometric leveling can't meet precision requirement, but tangent method surveying can meet precision requirement.
在悬空管线测量中，对于管径大、悬空高的管线，用普通三角高程法测量很难满足精度要求，而用切线法测量则很容易达到精度要求。
On regular highway reconnaissance work the tangent offset method is the most common one on highway route center stake layout but this method is limited because of route tangent as baseline for offset.
在公路常规勘测设计工作中，切线支距法是一种常用的中桩放样方法，但该方法以路线切线为基线，使用条件受到限制。
Surface electroosmosis method can reduce coal tangent ial resistance but the pole distribution affects the result of reducing resistance.
表面电渗法可有效地减少煤的切向阻力，但电极分布对电渗效果有很大影响。
In this paper calculating method of lead angle of helical gear by measuring span length of length bar and base tangent length is put forward and lead angle calculating formula is deducel.
分析齿轮主要参数，提出用测量跨棒（）和公法线长度计算斜齿圆柱齿轮螺旋角的测绘方法，并推导出螺旋角的计算公式。
The advanced instrumented impact test equipment and the method for treating test data with the hyperbolic tangent function ensure the accuracy of results.
采用了仪表化冲击试验设备和双曲正切函数回归计算的数据处理方法，因而确保了实验结果的准确性。
By using improved variational method, the internal energy per plaquette and the specific heat curves of the Tangent action in SU(2) lattice gauge theory arc worked out.
利用改进变分法求出了正切作用量的四维SU_（2）格点规范理论的元格内能和比热曲线。
For the tangent plane can be achieved by running continuous power flow method only once, it's possible to realize the online calculation of the static voltage stability region.
由于利用文中方法只需通过一次连续性潮流计算即可获得稳定域边界上的切平面，使得稳定域的在线计算及可视化成为可能。
In this paper, we propose a dimension reduction method based on the tangent bundle.
本文提出了一种基于切丛的维数约简方法。
As an effective manifold-learning method, the local tangent space alignment (LTSA) algorithm is sensitive to outliers.
局部切空间排列(LTSA)算法是一种有效的流形学习方法，但该算法对孤立点的存在非常敏感。
Combining with tangent subdividing method, this method can correct the counting error, recognize the direction and subdivide the fraction of fringes displacement.
采用正切细分法，对不足一个信号周期的条纹位移，实现了正确的辨向和高倍数细分。
This paper introduces the theory and its application of the curvilinear guided survey methods in concealed excavation of tunnels, such as chord offset method and tangent offset method.
介绍暗挖隧道曲线导向测量方法——弦线支距法和切弦线支距法的原理及应用。
By the method of sawing and saw blade swing taking the line of saw-teeth of saw blade's working side for centre, saw blade always works toward the tangent of sawing curve.
采用锯机连同带锯条一起以带锯条工作边锯齿齿尖连线为中心作回转摆动的方法，实现带锯条始终沿着锯切曲线的切线方向进行锯切。
The existing algorithms include equivalent left and right curve Angle by definition, normal section line method and tangent projection etc.
有关的算法有根据定义的左右曲面角相等，法截面法和切向投影等。
Through improving the displacement loading control method based on the tangent stiffness, this paper has presented displacement loading control method based on the secant stiffness.
在基于切线刚度的位移加载控制法基础上进行改进，采用基于割线刚度的位移加载控制方法，并绘制了相应框图。
The damage potential and evaluation method of a tangent nonlinear packaging system with critical component was investigated under the action of rectangular acceleration pulse.
研究了正切包装系统的关键部件在矩形脉冲激励下的冲击破损评价方法。
The application of tangent-initial-displacement method in solving fabrication geometry is introduced.
介绍了切线初始位移法在求解制造线形中的应用。
This paper presents two kinds of new methods for setting out circular curve: free angle and tangent length method.
介绍了测设和检验圆曲线的两种新方法：任意角夹角法和任意切线长支距法。
An adaptive string method is proposed based on the string method. In this method, a moving mesh method is adopted to control the tangent movement of mesh points.
用移动网格方法控制网格点的切向运动，在弦方法的基础上提出了自适应弦方法。
The basic principle of this method is introduced, the recurrence formula for the tangent of secants is deduced and the flow chart of the correspondent program is presented.
介绍了该方法的基本原理，导出了割线斜率的递推公式，并给出了具体的软件实现方法。
In this paper, the tangent spectrum method is extended to account for solution of incremental dynamic equations of RC structures with general segmental linear hysteretic models.
对切线谱法进行拓展，使之适用于具有一般分段线性恢复力模型结构的非线性地震反应增量运动方程的求解。
There are many methods to measure the circular curved line in circuitry construction survey. Angle offset method and tangent offset method are usually used.
在线路施工测量中，圆曲线测设方法有很多，通常采用偏角法或切线支距法。
In this paper, the tangent vector loading method and the boundary element restrain method was presented.
采用了切线矢量加载和边界单元的约束方法建立分析模型。
Based on the tangent function transformation, a modified global base expansion method (MGBEM) is proposed.
基于正切函数变换，本文提出了改进型全域基展开法(MGBEM)。
In this paper, an approximate method of using three tangent arcs to substitute the involute gear profile curve is put forward.
提出用圆弧来代替渐开线齿形的近似方法，实现了渐开线齿轮三维实体造型的直接编程生成技术。
In this paper, an approximate method of using three tangent arcs to substitute the involute gear profile curve is put forward.
提出用圆弧来代替渐开线齿形的近似方法，实现了渐开线齿轮三维实体造型的直接编程生成技术。
应用推荐