Inlet temperature distortion is one of the key factors effecting engine stability.
发动机进口温度畸变是影响发动机稳定性的关键因素之一。
A temperature distortion generator burning hydrogen in front of engine inlet produces thermal disturbance.
热扰动是由安装在发动机进口前的氢燃烧温度畸变发生器产生的。
Temperature distortion on inlet flow of engine is more important than pressure distortion for engine stability.
进口流场的温度畸变对军用飞机发动机稳定性具有比压力畸变更大的影响。
The influence of the pressure and temperature distortion to the engine stability is one of important target to evaluate aircraft engine.
压力和温度畸变对发动机稳定性影响的评定是当代航空燃气涡轮发动机适用性战术指标的重要内容之一。
The text introduce familiar disease and prevent measure of asphalt pavement such as high temperature distortion, split and water damage.
介绍了沥青路面常见病害，高温变形、开裂和水害的产生原因及防治措施。
Combined effective coefficient shows engine's capability to resist the combined distortion and the interaction between pressure and temperature distortions.
组合影响系数表示发动机抗组合畸变的能力以及压力畸变和温度畸变之间的相互影响。
The effect of combined distortion on engine stability is not a simple addition of pressure and temperature distortion effects, but a complex nonlinear relationship.
组合畸变对发动机稳定性的影响，不是压力畸变和温度畸变单独影响的简单相加，而是一种非常复杂的非线性关系。
Sensitive coefficients of engine circumference temperature distortion were derived. A group of temperature distortion parameters with most influence on steady operation was finally determined.
得到了发动机的周向温度畸变敏感系数，最终确定了对发动机稳定工作影响最大的一组温度畸变参数。
It exhibits high strength, rigidity, and good heat distortion temperature.
它具有高强度，刚度和良好的热变形温度。
If the temperature is too high, it means that infrared radiation increased, calligraphy and painting that would cause discoloration, fading and warping, distortion and even fragile.
如果温度过高，就意味着增加红外辐射，书法，绘画，将造成变色，褪色和扭曲，变形，甚至是脆弱的。
Impact heat distortion temperature and low; temperature impact strength.
提高热变型温度和代温冲击强度。
It combines flame retardant ability with an excellent balance of high strength, stiffness and heat distortion temperature.
它结合了火焰高强度优良的平衡，刚度和热变形温度阻燃能力。
A higher distortion temperature, elongation and fracture toughness, effectively preventing the production and use of products in the cracking, a fast curing the characteristics.
具有较高的热变形温度、断裂延伸率和冲击韧性，有效防止了制品在生产和使用中的开裂，同时具有固化快的特点。
The results showed that the tensile strength, thermal-oxidative stability, flame retardancy and heat distortion temperature of the composites are enhanced with increasing MHSH contents.
实验结果表明，复合材料的拉伸强度、热氧化稳定性、阻燃性能和热变形温度随着MHSH含量的增加而显著提高。
The cured system of epoxy resinlead benzoylate has high heat distortion temperature, but its dielectric properties at high temperature and heat ageing life deteriorate.
环氧-羧酸盐体系虽然热变形温度和热态强度较高，但高温下介电性能差，耐热老化性能也不好。
Aiming at the lost accuracy happened in HEL (hot embossing lithography) because of thermal distortion, room-temperature imprint lithography is proposed.
针对热压印光刻工艺中因热变形而导致精度丧失的问题，提出了冷压印光刻。
The linearity, wave distortion, temperature influence, and its compensation measure in detecting current during spot welding by hollelement are described in this paper.
论述了霍尔器件检测点焊焊接电流时的线性度、波形失真、温度的影响及其补偿措施。
During conventional hot extrusion processes, temperature and distortion of the billets change unevenly, so the dimension, shape, organization and capability of the profile will be deterioration.
在常规的铝及铝合金热挤压过程中，金属的温度和变形是很不均匀的，这将导致产品的尺寸、形状、组织和性能等质量方面的缺陷。
When the mould designed with the new equation is heated to molding temperature, the distortion meets the theoretical equation nicely.
按新方程加工的模具，当加热达到复合材料的成型温度时恰好变形到理论方程型面。
The space finite element analysis indicated that the prestressed concrete box girder's stress and the distortion are sensitive to the change of gradient of temperature pattern.
空间有限元分析表明，预应力混凝土箱梁的应力和变形对温度梯度模式的变化较为敏感。
This paper is an analysis and summary about the causes of distortion cracks, including those caused by contraction of concrete and variation of temperature, and uneven settlement of foundation.
本文主要对变形裂缝的成因及控制措施作了分析和总结，其中包括混凝土收缩和温度变化引起的裂缝，以及地基不均匀沉降引起的裂缝等。
The characteristics of dynamic welding angular distortions of aluminum alloy 5a12 with tig welding are investigated by self-made welding dynamic temperature and distortion measuring system.
利用温度与变形实时测量系统，对铝合金5a12薄板氩弧焊接动态角变形过程进行了试验研究，探讨通过特征值来描述角变形动态行为。
The company specializes in developing high temperature PPS material, the heat distortion temperature greater than 260 degrees, is a comprehensive performance of special engineering plastics.
本公司专业生产研发耐高温pps材料，其热变形温度大于260度，是一种综合性能优异的特种工程塑料。
Hence it is proposed that the temperature and the density of electrons in a rich cluster and the Hubble constant H0 may be determined from the observations of the IR-background distortion.
因此，通过对畸变的观测，可以确定富星系团内电子的密度和温度以及哈勃常数h_0。
Improved heat distortion temperature and low temperature impact strength.
提高热变型温度和低温冲击强度。
So accurate temperature field and thermal distortion field analysis is the key to resolve these problems.
对于输出窗准确的温度场和热形变场研究是解决热透镜效应的关键。
As the chlorine content of the product increased, the heat distortion temperature increased significantly, its targets have been increased mechanical strength, its wide range of applications.
该产品随着氯含量的提高，其热变形温度明显上升，其机械强度指标也相应提高，其应用范围十分广泛。
Its unique crystalline structure results in increased strength, stiffness, heat distortion temperature and performance under load as a homopolymer.
其独特的，增加了强度，刚度晶体结构的结果，热变形温度和负荷下表现为均聚物。
SiO2-JX could replace short glass fiber in the modification of PA6, improving the heat distortion temperature, removing the appearance of glass fiber, reducing shrinkage and the cost.
晶须矽可取代短玻纤使用，提高热变形温度、消除玻纤外露，降低收缩率及生产成本等。
SiO2-JX could replace short glass fiber in the modification of PA6, improving the heat distortion temperature, removing the appearance of glass fiber, reducing shrinkage and the cost.
晶须矽可取代短玻纤使用，提高热变形温度、消除玻纤外露，降低收缩率及生产成本等。
应用推荐