The result shows that the testing conditions are feasible.
结果表明，试验条件是可行的。
In this paper, the best testing conditions of modified refined super-iron battery were confirmed.
实验结果得出最佳的改性精制高铁电池电池测试条件。
Under all testing conditions the inter-granular corrosion was not observed on the magnesium anode.
在上述试验条件下没有发现镁阳极出现晶间腐蚀。
Under static thermal stability testing conditions, the color degradation proceeded with the time of oxidation.
静态热安定性试验条件下，喷气燃料的颜色随氧化时间呈相对稳定的加深趋势；
The factors affecting adsorption result were analyzed; moreover, the optimal testing conditions were confirmed.
分析了各因素对等温吸附实验结果的影响原因；
Even under ideal testing conditions, at least 20% of colon cancers can be missed by stool occult blood screening.
即使是在理想的检测环境下，也至少有20%的结肠癌在粪便潜血检查过程中被漏诊。
In this paper, the testing conditions and computing formula of DQE is presented for digital X-ray imaging devices.
本文论述了描述X线数字成像设备性能的参数—量子检出效率（DQE）的测试条件和计算公式。
The effect of testing conditions on test results of acid oxygenous groups on carbon black has been studied detailedly.
详细讨论了测定条件对炭黑表面酸性含氧基团测定结果的影响。
In the course of testing testing conditions have requirements, such as the environmental temperature and humidity test.
在测试过程中对检测条件也有要求，如测试环境温湿度等。
Testing conditions and main results of the wind tunnel test of the model of Shanghai South Railway Station are introduced.
介绍了上海铁路南站模型风洞试验概况和主要试验结果。
With full testing conditions, the positional errors and the diameter error results obtained by beth methods are consistent.
在保证测试条件的前提下，两种方法所求得的刻线位置误差及由它得到的直径误差结果趋于一致。
The effects of crude oil properties, the structure of PPD and the testing conditions on pour point depression were discussed.
讨论了原油的性质、降凝剂的结构及试验条件对降凝效果的影响。
Besides its novelty, a synthetic steroid's chemical stability under testing conditions also affects its chances of detection.
除了新颖性之外，在检验条件下的化学安定性，也攸关著合成类固醇能被筛检与否。
The parameters of the sample and testing conditions can be filled in the interface, all these can be printed in the test report.
软件设置界面可以填写试样材料的各种参数及设定试验条件，并通过打印报告输出试验结果。
Standard testing conditions: Officially specified conditions under which paper is tested: 50%relative humidity and 23 degree Celsius.
标准测试环境：正式指定的测试纸张环境；相对湿度50%，温度摄氏23度。
This is advantageous for making the lighting device robust to large power dissipation, especially under high current testing conditions.
这有利于使得照明设备对大功耗特别是在高电流试验条件下具有鲁棒性。
This in turn indicates that to optimize testing conditions test medium renewal should if possible be conducted if running the full life cycle study.
这转而表明，如果是在进行完整生命周期研究，想要优化测试条件的话，最好更新测试媒介。
Sometimes, owing to the limitation of specimens or testing conditions, etc., the measurement for the exact travel time of a wave phase is very difficult.
有时，由于样品和试验条件等方面的限制，准确测定波动的走时很困难。
However, it is important to note that because this is not a formal benchmark for JAX-RS frameworks, varying loads and testing conditions might cause different results.
但是应该注意一点，由于这不是正式的JAX - RS框架基准测试，改变负载和测试条件可能会导致不同的结果。
Low-level-light(LLL)weapon sight measurement technologies based on multiple environments testing conditions are always concerned by military equipments manufacturers.
基于多环境试验条件下的微光枪瞄检测技术一直是军备生产所关注的问题。
AC electrical dynamometer is an important device for engine test with easy-controlled testing conditions, easy-collected and managed parameters as well as high measuring precision.
目前，交流电力测功机是进行发动机性能试验的重要装置，其优点在于试验条件容易控制，参数便于采集处理，测量精度较高。
The orthogonal test was used to study the different factors that influence the solvent extraction of tobacco, and then the optimum testing conditions of extraction were determined.
对分子蒸馏分离烟草提取物的溶剂进行了研究。利用正交试验设计研究了影响溶剂萃取的各种因素，并确定了较合理的萃取条件。
Some common materials used in PCB surface coating were compared under specified standard testing conditions, and useful information was provided for the selection of coating for PCB.
对国内外几类常用的PCB表面防护涂料在规定的标准测试条件下三防性能的比较，从而有助于三防涂料在PC B组件产品应用上的优选。
When in comparison of statistic value the testing conditions have to be same with a reasonable tolerance considered and a proper quality control level chosen to gain the best result.
用统计值作对比时，应注意试验条件的一致性，合理考虑误差，恰当地选定质量控制水平，才能发挥更好的效果。
Where relevant, microbial challenge testing under testing conditions that, as far as possible, simulate patient use should be performed during development and documented in this section.
相应地，开发过程中应进行检测条件下的微生物挑战性试验(尽可能模拟病人使用情况)并写入本部分的文件。
It is pointed out that the testing conditions of plastics properties should near the production and application conditions as far as possible by taking melt flow rate (MFR) for an example.
以熔体流动速率为例，阐述塑料性能测试条件应尽量接近生产和使用条件。
It is pointed out that the testing conditions of plastics properties should near the production and application conditions as far as possible by taking melt flow rate (MFR) for an example.
以熔体流动速率为例，阐述塑料性能测试条件应尽量接近生产和使用条件。
应用推荐