The thermal decomposition behavior of PPS fibers was analyzed using TG-DSC coupling technology in N2.
采用TG- DSC联用技术对聚苯硫醚（PPS）纤维在N2氛围中的热分解行为进行分析。
The effect of doping Ti on synthesis of magnesium nickel hydrogen storage alloys through XRD, TG-DSC and SEM was reported.
借助于XRD、TG - DSC和SEM等技术研究了掺钛对氢化燃烧合成镁镍储氢合金的合成条件及合金性能的影响。
The purification results could be contrasted and analyzed by modern test equipments, e. g. TG-DSC, XRD, Laser-Raman Spectrum.
并借助TG-DSC、XRD和激光拉曼光谱等测试方法对提纯前后的金刚石微粉进行对比分析。
Thermal behavior of modified coal tar pitch was analyzed with thermogravimetric and differential scanning calorimetry (TG-DSC).
采用热重和示差扫描量热技术(TG - DSC)对改性前后煤沥青的热解行为进行了分析。
UV-Vis, Energy dispersive spectroscopy, Element analysis, TG-DSC or TG-DTA indentify that surface of metal nanoclusters was decorated by C_(60);
紫外-可见光谱、微区能谱扫描、高分辨率透射电镜分析、元素分析、热重-差示扫描量热等分析证实了C_（60）对金属纳米团簇表面的修饰；
TG-DSC method was used to study the affecting factors of the reaction between Hexakis(methoxymethyl)melamine(HMMM)and rosin acids and its kinetics.
利用热重-差示扫描量热法（TG-DSC）对六甲氧基甲基三聚氰胺（HMMM）与松香树脂酸的反应进行了研究。
The pyrolysis behavior and characteristics of filled polytetrafluoroethylene (PTFE) are studied in the atmosphere of nitrogen with TG-DSC-FTIR and TG.
采用TG - DSC - FTIR、TG技术研究了填充聚四氟乙烯(PTFE)在氮气气氛下的热解行为与热解规律。
The structures and properties of colloids and coatings were characterized by XRD, SEM, EDS, TG-DSC, VIDAS imagine analyzer, 71model micro-hardness, granularity analyzed etc.
采用XRD、SEM、EDS、TG - DSC、VIDAS图像分析仪、71型显微硬度计以及粒度分析仪等测试手段对胶体和涂层的结构和性能进行表征。
The crystal structure and the electrochemical performance were characterized by XRD, SEM, TG-DSC, laser particle-size distribution measurement and electrochemical performance testing.
采用XRD、SEM、TG-DSC、激光粒度分布以及电化学测试等手段对该材料进行了结构表征和性能测试。
The structures, chemical components and properties of the acquired products at room temperature were characterized and analyzed by XRD, Element analysis, SEM, FTIR, TG-DSC and Spectrum analysis.
用常温下的X射线衍射谱、元素分析、扫描电镜、红外光谱、热分析及光谱分析对产物的常温结构、组分及性质进行了表征。
The mechanism of thermal expansion of hydraulic cement paste is also re searched with DSC/TG and XRD methods.
借助于DSC/TG和XRD测试手段，对水泥石的热膨胀性能变化规律进行了机理分析。
TG and DSC show the resin's stability is better than cellulose's and the hydrogel has good keeping-water property, in which the most water was nature water.
TG和DSC分析表明，吸水树脂比剑麻纤维热稳定性好，吸水凝胶中水绝大多数是以自由水的状态存在且高温保水性很好。
The deaquation, melting, decomposing apex temperatures and water content of ciprofloxacin hydrochloride monohydrate crystals were measured by DSC and TG techniques respectively.
采用DSC和TG技术分别分析了一水盐酸环丙沙星晶体的脱水、熔化、分解温度和晶体的水含量；
The copolymers were characterized by IR, DSC, TG, X-ray and solubility test in common solvents.
用红外光谱、X -射线衍射、差热分析、热失重和溶解性试验对共聚物进行了表征。
Applications of differential scanning calorimetry (DSC) analysis and thermal gravity (TG) analysis in the study on kinetics of annealing transformation of amorphous alloys have been discussed.
论述了示差扫描热分析(dsc)和热重分析(TG)在研究非晶态合金退火转变动力学方面的应用。
The product structure was evaluated by DSC-TG elemental analysis, IR, 1H NMR and MS methods, moreover the sensitivity were normally measured.
通过DSC-TG、元素分析、IR、1HNMR和MS等方法，对其结构进行了鉴定，并进行了常规的感度测试。
The heat resistant poly(lactic acid) was studied, the structure and properties were characterized by FTIR, DSC, TG, X-ray diffraction, heat shrinkage and breakage strength.
研究了一种耐热聚乳酸，并对其进行了红外光谱、示差扫描量热分析、热重分析、X-射线衍射、热收缩及断裂强力等测试。
Then the tetra-coordinate silicon monomer and co-polymer were characterized by FT-IR, TG, DSC, GPC etc.
最后对合成的四配位硅单体及共聚物进行了IR、TG、DSC、GPC结构表征。
Heat resistance, curing reaction, and morphology of the modified phenolic resin system were characterized by TG, DSC, SEM and tem.
借助TG、DSC、SEM和TEM对改性酚醛树脂体系的耐热性能、固化反应和微观形态进行了表征。
The effect of organ-metallic compound OME on the combustion and thermal decomposition of ammonium dinitramide (ADN) was investigated by burning rate measurement, DSC and TG.
通过燃速测定、差示扫描量热技术（DSC）和热失重技术（TG）研究了有机金属化合物（OM E）对二硝酰胺铵（ADN）单元推进剂的热分解和燃烧性能的影响。
The thermal properties and crystallization behaviors were studied by means of differential scanning calorimetry (DSC), thermogravimetry (TG) and polarizing optical microscopy (POM), respectively.
用示差热分析（DSC），热重分析（TG）和偏光显微镜（POM）研究了材料的热性能和结晶行为。
To provide basic data for application of ammonium phosphomolybdate, it is characterised by means of XRD, IR, DSC and TG.
利用XRD、IR、DSC和TG对所制备的磷钼酸铵进行了表征，为磷钼酸铵的应用提供了理论基础。
The latent curing acceleration of the rareearth organometallic compound (MrAn) for the anhydride/epoxy resin system was studied by DSC, TG and rotation viscometer, etc.
结果表明，这种稀土化合物是酸酐／环氧树脂体系较为理想的潜伏性促进剂。
Catalyst of the organo-metallic compound (OME) on the combustion and thermal decomposition of HNIW monopropellant was investigated through burning rate measurement, DSC and TG thermal analysis.
通过燃速测定、差示扫描量热技术(dsc)和热失重技术(TG)研究了有机金属化合物催化剂(ome)对六硝基六氮杂异伍兹烷(HNIW)单元推进剂热分解和燃烧性能的影响。
Differential Scanning Calorimetry (DSC) was used to study glass transition and determine the Tg, some examples were given to in this article.
介绍了差示扫描量热法(dsc)测定玻璃化转变温度在食品中的一些运用。
The precursor was thermally analyzed by DSC-TG.
用DSC - TG对前躯体进行了差热分析。
Analysis methods such as SEM, DSC, TG were applied to characterize the composites.
利用扫描电镜SEM、差示扫描量热法(dsc)、热失重(TG)对这些材料进行了表征分析。
Amine-pillared lanthanum niobates with different chains length as pillars were characterized with XRD, TG and DSC.
用不同链长的有机胺柱撑镧铌酸，采用X射线衍射、热重、差热等分析方法对合成的各种产物进行表征。
The stabilization of the synthesized polymer and the relation of structure and fluorescent function were represented by DSC, TG, infrared spectroscopy and fluorescent spectroscopy.
通过DSC、TG、红外光谱、荧光光谱等手段研究了合成聚合物的热稳定性，及结构与荧光性能的关系。
The stabilization of the synthesized polymer and the relation of structure and fluorescent function were represented by DSC, TG, infrared spectroscopy and fluorescent spectroscopy.
通过DSC、TG、红外光谱、荧光光谱等手段研究了合成聚合物的热稳定性，及结构与荧光性能的关系。
应用推荐