The main reaction mechanism was determined by XRD and TG-DTA analysis.
通过XRD,TG - DTA分析确定了合成反应的主要历程。
The macromolecular polymer was characterized and analysed by IR and TG-DTA.
用红外光谱和热分析方法对聚合物进行了表征和分析。
Drying Properties of low cement refractory castable were examined by TG-DTA.
本文采用热重一差热分析法，检测了低水泥浇注料的干燥特性。
The crystal structure and reaction progress were investigated with XRD and TG-DTA.
借助XRD和TG - DTA等测试手段对材料的晶体结构和反应过程进行了分析。
The crystallization of the stoichiometric cordierite was studied by using TG-DTA and XRD.
采用TG - DTA、XRD分析了理论化学组成的堇青石微晶玻璃的晶化行为。
The thermal decompose progress and calcined temperature of precursor was determined by TG-DTA.
用TG - DTA法确定前驱体热分解过程及煅烧温度。
The primary pyrolysis mechanism of the polycarbosilane was explored by IR and TG-DTA technique.
文中还利用IR、TG—DTA 等手段对该先驱体的热解机理进行了初步探讨。
The sintering procedure is confirmed by differential thermal analysis and thermal gravimetric analysis(TG-DTA).
烧结制度是经过差热-热重分析（TG-DTA）来确定的。
TG-DTA and IR spectra indicated that the precursor was alkaline and the weight loss during calcination was 28.06%.
由TG - DTA和IR光谱分析表明，合成的沉淀为碱式碳酸盐，煅烧过程中失重为28.06%。
Their general molecular formula were characterized with elemental analysis, ir, UV, XRD, TEM, TG-DTA and TPR techniques.
通过元素分析、IR、UV、XRD、TEM、TG DTA、TPR等测试手段对其组成、结构、颗粒大小、热稳定性以及表面性能进行了表征。
Finally, pyrolysis, ceramic yield and structure evolution of the soluble PMS and modified PMS were studied through IR, TG-DTA and XRD analysis.
最后利用IR、TG - DTA、XRD等分析手段对可溶性PMS及其改性产物的热分解过程、结构变化、陶瓷收率进行了研究。
UV-Vis, Energy dispersive spectroscopy, Element analysis, TG-DSC or TG-DTA indentify that surface of metal nanoclusters was decorated by C_(60);
紫外-可见光谱、微区能谱扫描、高分辨率透射电镜分析、元素分析、热重-差示扫描量热等分析证实了C_（60）对金属纳米团簇表面的修饰；
The phase transformation of xerogels during heat treatment and the process of nonhydrolytic sol-gel reaction are studied by TG-DTA, XRD and FT-IR.
应用TG-DTA、XRD和FT-IR等测试手段研究了凝胶热处理过程中的相变化以及非水解溶胶-凝胶的反应过程。
The products have been characterized using laser scattered particle analyzer, specific surface areas measuring and testing instruments, XRD, TEM and TG-DTA.
通过激光粒度仪、比表面测定仪、XRD、TEM和TG-DTA对样品粒度、比表面、晶型、形貌、失重情况等进行分析表征。
The influence of thermal decomposition conditions on the morphology of the zinc oxide powder product was systematically investigated by means of TG-DTA, XRD and tem.
利用TG DTA、XRD、TEM等多种手段进行了系统研究，论述了热分解条件对沉淀-热分解二步法制备纳米氧化锌时对其产品结构和形貌的影响。
The sample powder characterization is tested by XRD, TG-DTA, and Raman spectrometer in respect of its particle size, physical phase, thermal stability and Raman feature.
利用XRD、TG - DTA、拉曼光谱仪等仪器分别对样品的粒度、物相、热稳定性及拉曼特征峰进行了表征。
The crystal structure and outward appearance, IR property and thermal stability of the organic-anion-pillared hydrotalcites have been studied by XRD, TEM, FTIR and TG-DTA.
通过XRD、TEM、FTIR、TG-DTA等多种表征手段分别对有机阴离子柱撑水滑石的晶相结构及其影响因素、晶体形貌、红外性能、热稳定性进行了研究。
Based on such analytical means as chemical analysis, XRD, IR, SEM and TG-DTA, the author carried on the research on the main mineral of Shoushan stone from Gaoshan district.
应用化学分析、X射线衍射、红外光谱、扫描电镜、差热热重等分析手段对高山寿山石进行了主矿物的研究。
Pyrite roasting process was studied by using TG-DTA thermal analysis. The effects of sample size, heating rate and roasting atmosphere on the roasting process were discussed.
用TG - DTA热分析法研究黄铁矿在不同粒度和不同升温速率及不同气氛中的焙烧过程。
Their heat stability difference were compared by X-ray crystal structural analysis and TG-DTA analysis. The results showed a similar crystal structure and different heat stability.
X 射线晶体结构分析与TG DTA分析表明，镍铁与镁铁水滑石晶体两者结构相似，但热稳定性存在一定差异。
The firing process for fly ash sintered brick with high additives has been systematically studied through tests of XRD, TG-DTA, SEM and physical mechanical properties for material.
通过XRD、TG -DTA、SEM及材料的物理力学性能等试验，较系统地研究了高掺量粉煤灰烧结砖煅烧过程。
The effects of preparing conditions on surface modification of graphite were introduced. The morphology observation, contact Angle determination and TG-DTA analysis were carried out.
介绍了包覆条件对石墨表面改性的影响，对改性后的石墨进行了形貌观察、接触角测定、差热-热重分析。
XRD, TG-DTA, SEM, TEM, and elementary analysis were used to characterize the structure, particle morphology, characteristic, and chemical composition of the synthesized layered compounds.
通过XRD、TG - DTA、SEM、TEM和元素分析研究了合成产物的结构、形貌、性质和化学组成，探讨了合成条件对水热反应产物的影响。
Synthesis condition and method of hexagonal calcium aluminate hydrate are described. The synthetic hexagonal calcium aluminate hydrate is characterized through chemical, TG-DTA and XRD analysis.
叙述了六方水合铝酸钙的合成条件和方法，并通过化学分析、TG - DTA分析和XRD分析对所合成的六方水合铝酸钙进行了表征。
The main influence factors on thermal decomposition of medical waste, such as sample type, heating rate, sample mass, end-temperature and heat-insulation time, were investigated by using TG-DTA.
用TG - DTA差热热重联用分析仪对影响医疗垃圾热解特性的主要因素，包括垃圾种类、升温速率、试样质量、实验终温和保温时间等进行了实验研究。
The roasting process of copper sulfide concentrate in the presence of calcium carbonate is studied by using the differential thermal analysis (DTA), thermogravimetric (TG) and X-ray diffraction.
通过DTA和TG结合X 射线衍射分析的方法，将硫化铜精矿加碳酸钙焙烧与硫化铜精矿焙烧的反应机理进行了对比研究。
Objective: To study the application of thermogravimetry (TG) and differential thermal analysis (DTA) in incompatibility of drugs.
目的探讨热重(TG)、差热(DTA)分析技术在药物配伍禁忌研究中的应用意义。
Some significative conclusions were drawn with the systematic test of the macroscopical and microcosmic physical property of the material by the DTA-TG, XRD, BET and SEM.
运用DTA - TG、XRD、BET和SEM等测试手段对材料的宏观和微观性能进行了测试并得出了一些有意义的结果。
The determination of particle size, together with SEM, XRD, IR, DTA, TG, inverse gas chromatography (IGC)and BET multi-layer absorption techniques were used to characterise kaolin samples.
采用粒度分析、SEM、XRD、IR、DTA和TG、反气相色谱（IGC）和BET多层吸附等测试方法对干粉磨高岭土进行分析测定。
Systematic studies on the mineral compositions and characters of the bentonite from Guangfeng were conducted by means of chemical analysis, XRD, SEM, IR and DTA-TG.
本文应用了红外光谱、X -射线衍射等现代分析测试手段对广丰膨润土矿的矿物组成及其特征进行了系统分析。
应用推荐