The paper discusses the effect of flame-resistance pine woods of flame-resist and its basic flame-retardant mechanism by the TG and DTA plots obtained from DTA instrument.
通过差热天平仪对阻燃松木样作TG曲线及DTA曲线分析阻燃剂在松木中的阻燃作用和基本阻燃机理。
The roasting process of copper sulfide concentrate in the presence of calcium carbonate is studied by using the differential thermal analysis (DTA), thermogravimetric (TG) and X-ray diffraction.
通过DTA和TG结合X 射线衍射分析的方法，将硫化铜精矿加碳酸钙焙烧与硫化铜精矿焙烧的反应机理进行了对比研究。
The determination of particle size, together with SEM, XRD, IR, DTA, TG, inverse gas chromatography (IGC)and BET multi-layer absorption techniques were used to characterise kaolin samples.
采用粒度分析、SEM、XRD、IR、DTA和TG、反气相色谱（IGC）和BET多层吸附等测试方法对干粉磨高岭土进行分析测定。
The thermal stability of these two series complexes was studied by TG, DTA, IR spectra and X-ray powder diffraction.
并利用TG、DTA、IR光谱和x射线粉末衍射等手段研究了两系列稀土杂多配合物的热稳定性；
The effect of products powders on thermal decomposition kinetics of AP was investigated by thermogravimetry (TG) and differential therm analysis (DTA).
采用差热分析法（DTA）和热重法（TG）研究了产物对AP热分解的影响。
The structure and the thermal properties of the monomers and phthalocyanine polymers were characterized and evaluated by IR, DTA, TG.
以IR、DTA、TG等对单体和酞菁聚合物的结构和热性能进行了表征和研究。
XRD, IR, DTA, TG and spectrophotometric analysis were used in the research of the composition and structure of the products.
用x -衍射、红外光谱、差热、热重、分光光度等方法对其组成和结构进行了研究。
The data of DTA, TG, DTG, T and sample temperature can be displayed on CRT, and the required results can be printed and plotted.
由CRT实时显示所采集的差热、热重、微商热重和样品温度四种参量的数据，并能打印和绘制出所需要的结果。
The process of dehydration for a group of metal ion-exchanged montmorillonite has been studied using DTA, TG, XRD and TPD-GC methods.
用DTA，TG，XRD以及TPD-GC等方法系统地研究了一组金属离子交换蒙脱石的脱水过程。
All the samples obtained were examined with X-ray diffraction, isothermal adsorption of water, DTA, TG, IR, TEM, and chemical analysis, and were identified as L-type molecular sieve.
产物经X射线衍射，水的等温吸附、差热分析、红外图谱，透射电镜以及化学分析等测定证实为L型沸石。
The mechanisms of stability of the sols and film formations were discussed. The evolutions of the structure of films after heat treatment are discussed by means of TG DTA and IR analysis.
并讨论了溶胶稳定和成膜的机理，通过TG- DTA和IR分析探讨了固体薄膜在热处理过程中的结构变化。
Phase and microstructure changes of silica ultrafine particles in sintering were studied with FT-IR, XRD, DTA/TG and TEM et al.
并用FT-IR、XRD、DTA/TG和TEM等手段研究了二氧化硅超微细粉在煅烧过程中的物相和显微结构的变化。
Their heat stability difference were compared by X-ray crystal structural analysis and TG-DTA analysis. The results showed a similar crystal structure and different heat stability.
X 射线晶体结构分析与TG DTA分析表明，镍铁与镁铁水滑石晶体两者结构相似，但热稳定性存在一定差异。
The reaction process of PCS fibers in air was investigated by TG - DTA and kinetics calculation methods. Effects of curing conditions on weight gain and curing degree of PCS fibers were researched.
利用TG-DTA和动力学计算方法对聚碳硅烷纤维在空气中的反应过程进行了研究，探讨了不熔化工艺条件对纤维增重及其不熔化程度的影响。
The macromolecular polymer was characterized and analysed by IR and TG-DTA.
用红外光谱和热分析方法对聚合物进行了表征和分析。
Synthesis condition and method of hexagonal calcium aluminate hydrate are described. The synthetic hexagonal calcium aluminate hydrate is characterized through chemical, TG-DTA and XRD analysis.
叙述了六方水合铝酸钙的合成条件和方法，并通过化学分析、TG - DTA分析和XRD分析对所合成的六方水合铝酸钙进行了表征。
The firing process for fly ash sintered brick with high additives has been systematically studied through tests of XRD, TG-DTA, SEM and physical mechanical properties for material.
通过XRD、TG -DTA、SEM及材料的物理力学性能等试验，较系统地研究了高掺量粉煤灰烧结砖煅烧过程。
Pyrite roasting process was studied by using TG-DTA thermal analysis. The effects of sample size, heating rate and roasting atmosphere on the roasting process were discussed.
用TG - DTA热分析法研究黄铁矿在不同粒度和不同升温速率及不同气氛中的焙烧过程。
The thermal decompose progress and calcined temperature of precursor was determined by TG-DTA.
用TG - DTA法确定前驱体热分解过程及煅烧温度。
Objective: To study the application of thermogravimetry (TG) and differential thermal analysis (DTA) in incompatibility of drugs.
目的探讨热重(TG)、差热(DTA)分析技术在药物配伍禁忌研究中的应用意义。
The effects of preparing conditions on surface modification of graphite were introduced. The morphology observation, contact Angle determination and TG-DTA analysis were carried out.
介绍了包覆条件对石墨表面改性的影响，对改性后的石墨进行了形貌观察、接触角测定、差热-热重分析。
XRD, TG-DTA, SEM, TEM, and elementary analysis were used to characterize the structure, particle morphology, characteristic, and chemical composition of the synthesized layered compounds.
通过XRD、TG - DTA、SEM、TEM和元素分析研究了合成产物的结构、形貌、性质和化学组成，探讨了合成条件对水热反应产物的影响。
Systematic studies on the mineral compositions and characters of the bentonite from Guangfeng were conducted by means of chemical analysis, XRD, SEM, IR and DTA-TG.
本文应用了红外光谱、X -射线衍射等现代分析测试手段对广丰膨润土矿的矿物组成及其特征进行了系统分析。
TG-DTA and IR spectra indicated that the precursor was alkaline and the weight loss during calcination was 28.06%.
由TG - DTA和IR光谱分析表明，合成的沉淀为碱式碳酸盐，煅烧过程中失重为28.06%。
The phase transformation of xerogels during heat treatment and the process of nonhydrolytic sol-gel reaction are studied by TG-DTA, XRD and FT-IR.
应用TG-DTA、XRD和FT-IR等测试手段研究了凝胶热处理过程中的相变化以及非水解溶胶-凝胶的反应过程。
Some significative conclusions were drawn with the systematic test of the macroscopical and microcosmic physical property of the material by the DTA-TG, XRD, BET and SEM.
运用DTA - TG、XRD、BET和SEM等测试手段对材料的宏观和微观性能进行了测试并得出了一些有意义的结果。
The main reaction mechanism was determined by XRD and TG-DTA analysis.
通过XRD,TG - DTA分析确定了合成反应的主要历程。
The sample powder characterization is tested by XRD, TG-DTA, and Raman spectrometer in respect of its particle size, physical phase, thermal stability and Raman feature.
利用XRD、TG - DTA、拉曼光谱仪等仪器分别对样品的粒度、物相、热稳定性及拉曼特征峰进行了表征。
The roasting kinetics of copper sulfide concentrate is investigated with the differential thermal analysis (DTA), thermo-gravimetry (TG) and X-ray diffraction (XRD).
采用DTA ，TG结合X -射线衍射分析，对硫化铜精矿的焙烧的动力学进行了研究。
The crystal structure and reaction progress were investigated with XRD and TG-DTA.
借助XRD和TG - DTA等测试手段对材料的晶体结构和反应过程进行了分析。
应用推荐