Experimentation data shows that the principle of bending mechanism in this article is feasible, finite element model of bending mechanism is credible and its design method is dependable.
样机试验数据表明提供的压弯机构原理是可行的，压弯机构仿真有限元模型是可信的，这种设计方法是可靠的。
The optimized design scheme could be found out to content requirements of design by a method combining calculation of finite element model and optimized design.
采用整体有限元模型计算与设计优化相结合的方法，可以在满足各项设计要求的条件下找到最优预应力设计方案。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
In this dissertation, nonlinear finite element model establishment method of the guyed mast is studied.
本文研究了桅杆结构非线性有限元模型的建立方法。
Using complex structure finite element analysis, the theoretical prediction conforms with the experimental results very well, the equivalent model is reasonable, and the method is correct.
所建模型经复杂结构有限元方法分析，结果和试验相吻合，表明等效模型是合理的，方法是正确的。
This paper describes a method based on the generalized principle of virtual work to derive the hybrid model of finite element. An assumed-strain hybrid model was obtained.
本文提出用广义虚功原理的方法建立有限元的杂交模型，并具体导出了一种杂交应变模型。
In this paper, the theoretical model of cross-flow of grain cleaning fan on farm is proposed by using the finite element method.
本文应用有限元方法，建立了横流式农用清选风机内部的气体流动数值模拟模型。
Second, using large-scale finite element method software—MARC establishes the rolling model, and compiles the process file, and sets up the different rolling condition parameters.
运用大型有限元软件MARC，建立轧制模型，编写过程文件，设置不同的轧制条件参数。
A mathematical model for thermal process is established and the process is simulated by numerical methods such as finite element method etc.
建立了热过程的数学模型，并采用有限元等数值方法模拟其热过程。
Strengthening method was proposed on this basis, the finite element model of strengthened bus was built and static calculation was carried out to analyze the intensity of strengthened bus.
在此基础上提出加强方案，建立加强车的有限元模型，进行静态计算分析加强车的强度，同时考察加强方案的效果与不足。
The paper USES finite element method to calculate the whole reel structure of a ship lift and presents the mechanical model of finite element analysis for the structure as a whole.
采用有限单元法对升船机卷筒结构进行整体计算，提出了有限元分析的力学模型，对筒壳、幅板的强度及刚度作了全面分析。
In this paper a practicable testing method for frame rigidity is described. The method is aimed at checking the finite element model of frame structure analysis.
为检验车架结构分析的有限元模型，通过一具体车架的刚度试验，总结出一套实用的车架刚度试验方法。
The finite element method is mature in theory, but it is difficult to fix the earth model and the soil parameters, so being difficulty to be practice applied.
有限元分析法在理论上较成熟，但因其存在土体模型和土性参数难确定等困难，难以实际应用。
According to rock soil engineering properties and dynamic character of the ash dam of Anyang Power Plant, the dynamic analytical model is set up by the finite element method.
根据安阳电厂灰坝岩土工程性质及其动力学特性，建立了适合灰坝工程的动力分析模型并采用有限元法进行了动力分析。
The first part deals with the fundamental physical assumptions and mathematical model, while the second part describes finite-element approximation and method of calculations.
第一部分提出了基本的物理假定，讨论了数学模型；第二部分是有限元逼近和计算方法的讨论。
This paper is based on stress analysis of directionally solidified turbine blade with the Finite Element Method. The reliability analysis method with a simple failure model is proposed.
本文在正交异性材料定向结晶涡轮叶片的应力有限元分析的基础上，以一种简单的破坏模式列出了可靠度的计算方法。
Analyze truss antenna framework structure with finite element method and establish sub-model to compute the stress distribution of the speecial part.
应用有限元方法对桁架式天线骨架结构进行分析，在关注区域建立了模型计算准确的应力分布。
The methods of analyzing the strength of complex mechanical structure were studied through the application of the finite element method, and the methods of building model and gridding were discussed.
研究了用有限元法对复杂机械结构进行强度分析的方法和步骤，对复杂机械结构的建模方法和网格划分进行了探讨。
This paper analyzes the structural stress of a forge press by finite element method, and tests and verifies its correctness by the model experiment.
本文利用有限元方法计算分析了锻压机架的结构应力，并用模型实验检验了有限元计算的正确性。
Using the finite element method, a mathematical model of temperature field for weld-repaired zone of white cast iron is constructed, and temperature field and heat cycle are analyzed.
应用有限元方法建立了白口铸铁焊接接头焊补温度场的数学模型，对白口铸铁焊补温度场和热循环进行了分析。
Objective To explore a fast and precise method for the establishment of three-dimensional finite element model of lumbar.
目的探索一种快速、精确的建立腰椎三维有限元模型的简便方法。
The result of the method of sandwich plate is proved to be in good agreement with the finite element model result.
把有限元模型和拟夹层板法两者的计算结果进行比较，二者吻合较好。
By the equilong unit finite element method based on the Wenkel model, the computation is speeded up remarkably.
采用文克尔模型为基础的等长单元有限元法，显著地提高了计算速度。
The finite element method was employed to study the micromechanics in rubber toughened epoxy resins using the axisymmetric model contained a rubber and a hole.
使用包含一个橡胶和空穴的轴对称模型的有限元计算来分析橡胶增韧环氧树脂细观上的力学行为。
The paper provides the mathematical model of numerical simulation for metal surface hardened by plasma-arc with finite element method.
给出了用有限元方法对金属材料等离子体弧金属表面强化处理过程数值模拟的数学模型。
The model element method includes both finite element method and upper bound element method and can compensate each to other.
模型元法的特点是既包容有限元法，又包容上限元法，使三者相互取长补短，互为基础。
In this paper, a method USES to calculate structure dynamic response is proposed, which is based on the three parameter reliability model and perturbation probabilistic finite element method.
将可靠性分析三参数法与摄动概率有限元法相结合，提出了一套求解结构体动态响应概率分布的方法。
Based on the finite element method, a spring element model is used.
本文在有限元法的基础上利用弹簧单元模型来分析。
Based on the finite element method, a spring element model is used.
本文在有限元法的基础上利用弹簧单元模型来分析。
应用推荐