C current is convenient to control the furnace temperature automatically.
直流控制调压便于实现自动控温。
The furnace temperature is measured, indicated and auto-controlled through its matching temperature controller.
使用时炉温需通过配套之温度控制器进行测量、指示和自动控制。
Different structures can be made by varying the furnace temperature and using different treatments of the substrate.
通过调整炉温和基底处理方法可以制造不同的结构。
Finally, Smith estimating and cascaded temperature control technology are applied to the furnace temperature control system.
主要介绍了炉温控制和近年来在连续退火炉中广泛应用的二次燃烧控制。
The furnace temperature control and the after-burning control widely-used for continuous annealer in late years are mainly described.
主要介绍了炉温控制和近年来在连续退火炉中广泛应用的二次燃烧控制。
And discussed for the furnace temperature processing software and hardware, as well as the development process problems and solutions.
并且讨论针对于钢化炉温度处理的软、硬件构成，以及开发过程中遇到的问题和解决方法。
The use of feedforward signal makes the furnace temperature control have the leading decision function and improve the degree of intelligence.
前馈信号的引入使炉温控制具有超前决策功能，提高了智能程度。
The digital indicating-controlling instrument to control the furnace temperature is used with a simple circuit of high anti-interference ability.
采用数字式显示调节器控制炉温，线路简单、抗干扰能力强。
Accurate measurement of the furnace temperature is an important topic for safety and stabilization of the furnace running and optimize the combustion process.
炉膛温度准确测量对于锅炉运行的安全、稳定以及燃烧优化有着很大的意义。
KSF KSY Series digital display temperature controller cannot only measure and control the furnace temperature, but also display the digital of the temperature of the furnace chamber.
KSG与KSY系列是数显式温度控制器，不仅能自动测量、控制电炉温度，尚能对炉膛温度进行显示。
If the heading element is much damaged or its resistance value increases too much and cannot reach the furnace temperature, it is better to replace the heating elements with mew ones.
若元件损坏较多或阻值增长过大，无法达到所需炉温时最好全部更换新元件。
In the furnace temperature and furnace pressure control circuit, using common fuzzy controller, the rapid response characteristics and more precise temperature, pressure control effect.
在炉温和炉压控制回路中，采用普通的模糊控制器，得到了较快的响应特性和比较精确的温度、压力控制效果。
In the oil combustion, using top gun, the upper wind at a heat load of boiler blower gathered, part of the furnace temperature is high, reaching the ash melting point, resulting in boiler coking.
在投油稳燃时，运用上层油枪，使得上层一次风处热负荷会集，锅炉鼓风机部分炉温高，到达灰熔点，致使锅炉结焦。
The system can achieve the temperature parameters of the collection, storage, analysis and control functions, and pass the furnace temperature finite difference simulation product quality forecasts.
该系统可实现温度参数的采集、存储、分析与控制功能、并能通过炉内温度场的有限差分模拟进行产品质量预测。
The invention has the advantages of high preheating temperature, gas-saving, less heat loss and energy consumption, and the air temperature can be preheated over 80 percent of the furnace temperature.
采用本发明预热温度高，热损失少，节省燃气，能耗少，能够将空气温度预热到炉温的80%以上。
Even when not recycled, sorted trash is easier for incinerators to burn cleanly, because the temperature in the furnace can be adjusted more precisely to minimize the formation of dioxin.
而即使不循环利用垃圾，分类后的垃圾可以让燃烧炉里的温度更精确地与其匹配，从而最低程度降低二恶英，使垃圾焚烧厂的燃烧过程更加清洁。
This paper is mainly discuss the design about PLC temperature control system of box heat-treatment furnace.
本文主要讨论了以可编程控制器为核心的箱式热处理炉温度控制系统的设计。
A modified fuzzy controller structure which has faster response and higher accuracy is used to control the temperature and the pressure of the furnace.
在炉温和炉压控制回路中，采用了经过改进的模糊控制器，得到了较快的响应特性和较精确的温度、压力控制效果。
The structure and measuring principle of gradient furnace were introduced, and the curve of the foam temperature and bubble diameter was drawn.
介绍了梯温炉的结构及原理，根据测量结果绘制了发泡温度与泡径的关系曲线。
The diameter of actual tangent circle is an important parameter for safety of boiler, the residual rotation is the key factor of flue gas temperature deviation at furnace exit.
实际切圆直径是锅炉稳定安全运行的一个重要参数，炉膛出口残余旋转是造成烟温偏差的主要原因。
The requirement to flow, pressure, heating temperature and purity of converter gas used in reheating furnace were introduced.
介绍了加热炉在使用转炉煤气作为燃料时，对其流量、压力、加热温度和纯洁度的要求。
CYCLE time: Amount of time product spends in a furnace at specified temperature for the purpose of carburizing or hardening product.
周期：产品在炉中某特定温度下渗碳或硬化所需要的时间。
The accurate control of the work pieces temperature in vacuum annealing furnace is a typical nonlinear large time delay and cross coupling complicated problem.
而在真空退火的生产过程中，退火工件温度的精确控制是一个典型的非线性、大时滞、强耦合的复杂控制问题。
The limestone particles are heated rapidly to high temperature upon entry into the boiler furnace.
当石灰石颗粒一进入锅炉炉膛，就迅速被加热到高温。
The relationship between temperature, carbon loss rate and compression strength of coke in the lumpish section of blast furnace was investigated.
重点研究焦炭在高炉块状带内的抗压强度与温度和反应程度的关系。
The temperature change of knitting needles during quenching in the mesh-belt furnace was simulated using the ANSYS software.
针对织针网带炉淬火，利用有限元分析软件ANSYS，对织针加热过程中的温度变化进行了模拟。
The temperature change of knitting needles during quenching in the mesh-belt furnace was simulated using the ANSYS software.
针对织针网带炉淬火，利用有限元分析软件ANSYS，对织针加热过程中的温度变化进行了模拟。
应用推荐