Studied the rapid tests method and the mathematical model method simultaneously in the same experiment.
在同一试验条件下对快速测定法和数学模型法进行了对比研究。
Based on the physical and mathematical model of spacecraft propulsion system, the application of model based fault diagnosis method to the propulsion system of spacecraft was studied.
在飞船推进系统的物理和数学模型的基础上，研究了基于模型的故障诊断方法在飞船推进系统中的应用。
A mathematical model is established and validated with computer imitation. The results show that the method can effectively improve accuracy of object position and reliability.
建立其数学模型，并进行计算机仿真验证，其结果显示出该方法可以有效地提高目标的位置精度与可靠性。
This method is also can be used to build the mathematical model of multi evaporator .
该方法对于建立多效蒸发器液位的数学模型普遍实用。
The mathematical model of master-slave synchronous winding control system is established here, and the design methods of the system hardware and control method are introduced in detail.
建立了主从式同步卷绕控制系统的数学模型，并详细介绍了控制系统硬件和控制方法的具体设计。
The mathematical model of optimization design for swing movable teeth drives is set, and the optimization design method is proposed in this paper.
本文建立了摆动活齿传动的优化设计数学模型，提出了优化设计方法。
The proposed method dealt with measurable signal of the aircraft, mathematical model and no relevant transcendental knowledge was needed.
粗集方法可直接处理歼击机的可测输出信号，不需要对象的数学模型和相关先验知识。
The analysis of sidesways of staggered steel truss structure is discussed. The mathematical model of an equivalent continum is proposed and solved by the lateral shear rigidity method.
对交错钢桁架结构的侧移分析，采用连续化的数学模型和侧向抗剪刚度法。
The mathematical model of the surface shape measurement of aspherical optical components is built up according to the laser scanning measurement principle by the translation & rotation method.
根据激光扫描平移加旋转法的测量原理，推导出了非球面光学零件面形测量的数学模型；
The dynamic mathematical model of typical parts of generating boiler is set up according to basic physical laws, the modular library of system equipment is produced by Euler method.
依据基本物理定律，建立电站锅炉热力系统典型环节的动态数学模型并形成系统设备模块库，以欧拉法求解。
The mathematical model and design method of hot wire sensors at constant voltage or constant temperature are expounded emphatically.
重点阐述了恒压和恒温工作方式下热线式传感器的数学模型和设计方法。
Because the mathematical model is convenient to program, this method suits for analysis with computer as compared with other methods.
与其它方法比较，该方法提供的是程序化的数学模型，便于计算机分析。
Based on gradation decreasing dimension discrete variable optimum method, for established the mathematical model calculated.
基于分层降维离散变量优化方法，对建立的数学模型进行了计算。
The two procedures are compared at individual′s repetitivity, juror′s consistency, and correlation to results acquired by pair comparison method and by calculation with mathematical model.
分析比较了两种语义细分法在评价者的个体重复性、团组一致性以及与成对比较法和计算结果的相关性。
Finally, based on the mathematical model and design method of FGM, an intelligent design system of FGM is developed through computer programming.
最后，基于以上数学模型和设计方法，通过计算机编制程序，开发了一个智能化的FGM软件设计系统。
This method realizes the measure of the practical profile of the spatial CAM and establishes the mathematical model and error calculate method.
建立了数据处理的数学模型和误差计算方法，为空间凸轮廓面检测与误差计算提供了新方法。
In solving the mathematical model, two time-saving and effective numerical methods have been tested and compared with the finite difference method commonly used.
对动态数学校型的数值求解，试验了两种颇为有效的方法，并将这两种方法和常用的有限差分方法作了比较。
The mathematical model and computing method of theory of recursion least squares is given.
给出了迭代最小二乘方法的数学模型和解算途径。
The mathematical model, the method for optimizing design, and the design principle of hydraulic parameters are proposed to make head-flow curve flat.
流量曲线特点，提出了旋喷泵叶轮的优化设计数学模型、叶轮优化设计方法及水力参数的设计原则。
This paper discussed the basic procedure, method and the main mathematical model of real_time irrigation forecasting.
讨论了实时灌溉预报的基本步骤和方法以及主要数学模型。
The combination of physical model and mathematical model is an effective method to study the hydraulic transient process of complex water transfer system.
采用物理模型和数学模型相结合的研究方法，是研究复杂输水系统水力过渡过程的有效途经。
The responding nonlinear ship motion mathematical model is constructed on the basis of the state space ship motion mathematical model by the systematic method of input-output information.
本文在状态空间型的船舶运动数学模型的基础上，用输入—输出信息的系统性方法构造出响应型非线性船舶运动数学模型。
The mathematical model built by the data fit method based spline least square has not only higher precision of model and fit coherence, but low degree of model, more smooth also.
基于样条最小二乘数据拟合方法建立的数学模型不仅可以提高模型精度和拟合程度，而且模型阶数较低，光滑性好。
The mathematical model of the molten iron ladle was established using finite element method.
本文采用有限元法建立了铁液包倾转力矩数学模型。
The key to a successful calculation and prediction of welding process by mathematical model method is the selecting of an appropriate model and its parameters.
用数学模型方法进行焊接过程的计算和预测，关键是选取合适的计算模型和模型参数。
Instead of the complicated mathematical model, the correlation method could be used to predict the choked flow rate through adiabatic capillary tube.
关联方法可替代复杂的数学模型，用以预测绝热毛细管的壅塞流量特性。
To testify the practicability and correctness of the mathematical model, the best method is to take full scale test on ship.
证明数学模型的实用性和正确性的最好方法是实船试验。
After the mathematical model of the system is developed, a practical method of establishing a testing datum is advances. Moreover, the system error is analyzed and estimated.
在建立了测量数学模型之后，提出了适用的测试基准建立方法，并对基准建立后的系统误差进行了分析计算。
In the paper, the mathematical model for the proposed method is deduced, and the mean and variance of the acquired carrier difference phase of the proposed method are analyzed and simulated.
给出了该方法提取两导航台载波差分相位的数学模型，并分析了该方法提取的差分相位的均值及误差，进行了计算机仿真。
In the paper, the mathematical model for the proposed method is deduced, and the mean and variance of the acquired carrier difference phase of the proposed method are analyzed and simulated.
给出了该方法提取两导航台载波差分相位的数学模型，并分析了该方法提取的差分相位的均值及误差，进行了计算机仿真。
应用推荐