The numerical modeling results are given.
给出了数值模拟的结果。
An example of calculation by the numerical modeling is given in the end.
最后给出了一个数值模拟计算的实例。
Emphasis in the numerical modeling is put on the problem of shot and receiving ways.
数值模拟中，重点探讨了激发和接收的方式问题。
The numerical modeling of solidification process is moving from macro-to micro-modeling.
凝固过程的数值模拟正在由宏观向微观转变。
The numerical modeling of the moving interface is one of the most important problems in CFD.
运动界面的数值模拟是计算流体力学中的重要课题之一。
The numerical modeling of wind current is studied under winter and summer monsoon conditions.
本文对台湾海峡风海流的研究分为冬季和夏季两种情况来模拟。
The practicability and good effect of the method have been proved by the numerical modeling and real cases.
数值模型试验和实际工程应用结果表明该方法具有很好应用效果。
The practicability and good effect of the method have been proved by the numerical modeling and some real cases.
数值模型试验和实际工程应用证实了该方法的实用性和良好效果。
The numerical modeling tests are carried out for smooth relief model and arbitrary relief model by using abovementioned methods.
运用上述方法对光滑起伏模型和任意起伏模型进行了数值模拟试验。
The numerical modeling of pulverized coal combustion in an oxygen coal combustor was made by using the continuum trajectory model.
本文采用颗粒相连续介质-轨道模型对同轴射流渐扩式高炉氧煤燃烧器内煤粉燃烧过程进行了数值模拟。
Through the numerical modeling of mass transfer at the different conditions, the evolution of the droplet in the whole process is analyzed.
在不同的操作条件下，对液滴和反溶剂之间传质过程进行数值模拟，分析液滴在整个传质过程中变化趋势。
The results of several simulations were presented to demonstrate the importance of these issues on the numerical modeling of unsaturated seepage.
通过多个计算实例的比较分析，充分明确了这几个基本问题对非饱和渗流数值模拟所带来的重要影响。
In this paper, we discuss the numerical modeling of complex resistivity anomalies for Cole-Cole dispersion model by the Finite Element Method (FEM).
本文研究了用有限元数值方法模拟柯尔—柯尔复电阻率模型异常规律的问题。
Finally, under the three-dimensional ECOM model, the Particle-tracing Method is applied to the numerical modeling of the Changjiang Estuary sewage diffusion.
最后，本文在三维ecom模型下把质点跟踪法应用到了对长江口污染物扩散的数值模拟中。
The matching relation between the viscosity and the mesh size was obtained using planar approximate method and integral method in the numerical modeling of divergent detonation.
分别应用平面近似法和积分方法推导出在散心爆轰的数值模拟中，人为粘性系数和空间步长之间的匹配关系。
The comparison shows that the numerical modeling results are basically consistent with the experimental data, and the precision and the speed of numerical modeling greatly improve.
对比显示，数值正演结果与试验数据基本一致，且数值正演的速度和精度均显著提高。
It indicates that the numerical modeling can reflect the status of soil moisture movement under the condition of water storage pit irrigation, and its method of solution is feasible.
说明所建立的数学模型能够反映蓄水坑灌条件下的土壤水分运动状况，其数值求解方法也是可行的。
The models established for material flow in FSW are described in this paper. The results of the numerical modeling and the limitations existing in the models are also been introduced.
介绍了FSW过程数值模拟的一些研究进展，对资料中建立的模型和模拟结果进行了简要的描述。
The numerical modeling and analysis of static and dynamic strength and characteristics of the low floor city bus body structure are carried out in the paper, using a standard CAE software.
利用标准的CAE软件平台，对低地板城市客车车身结构进行数值建模和静动态特性分析。
Based on available research results the author probes into the numerical modeling of velocity field of upstream and downstream flow of project with asymmetric plan layout of gate and plant.
在现有研究成果的基础上，对闸站平面不对称布置枢纽上下游水流流场的数值模拟方法进行了探讨。
The typical use case for Numerical Python is in scientific modeling, or perhaps in related areas such as graphic manipulations and convolutions or signal processing.
Numerical Python的典型用例是科学建模，或者可能是相关领域，比如图形处理和旋转，或者信号处理。
And then combine geometric, behavior modeling methods to simulate the actual manufacture and operation of numerical control lathe.
最后将几何建模和行为建模结合起来模拟数控机床的实际加工、操作过程。
Then, by using the flamelet model, numerical simulations of Flame D were performed and the modeling accuracy and depth of flamelet model are investigated.
然后，采用火焰面模型对该湍流扩散火焰进行了数值模拟并和实验数据进行了比较，考察了火焰面模型的精确程度和模拟深度。
It provides complete, authoritative coverage of the concepts, experimental techniques, and numerical modeling of multiphase flows.
它提供概念的完整，威权的新闻报导，多相的实验技术和数字模型流动。
In CAE of welded structures, the effective computing and accurate modeling of numerical simulation are as the main problems in three-dimensional analysis.
在焊接结构的CAE中，复杂焊接结构数值模拟的高效运算和精确建模是实现三维分析的主要困难。
In this paper a new method of modeling forecasting is given for the time series by using the numerical solution of differential equation.
本文利用微分方程的数值解法对时间序列建模预测作了新的尝试。
Based on the principle of interaction between plastic volumetric strain and plastic generalized shear strain, the method of numerical modeling for constitutive relations of clay is studied.
以塑性体应变与塑性剪应变之间的相互作用原理为指导，对粘土本构关系的数值建模方法进行了研究。
The paper puts forward the simplified calculating method of soil stress of the culvert top on the foundation of numerical simulating and centrifuge modeling.
在数值模拟和室内离心机模型试验的基础上，提出了高填方涵洞顶部土压力简化计算方法。
The paper puts forward the simplified calculating method of soil stress of the culvert top on the foundation of numerical simulating and centrifuge modeling.
在数值模拟和室内离心机模型试验的基础上，提出了高填方涵洞顶部土压力简化计算方法。
应用推荐