In order to optimize the structure parameters of the tower, the orthogonal design method is used.
为了优化塔架的结构参数，采用正交设计对其结构尺寸进行了优化。
The influence of main structure parameters on static and dynamic characteristics is investigated comprehensively by using orthogonal test design.
应用正交试验设计全面分析结构主要参数对传感器的静、动特性的影响。
By means of the finite element program ANSYS and using orthogonal design method, the parameters having effect on the stability of this structure were analyzed and primary factors were obtained.
本文利用ANSYS有限元程序通过正交设计的方法对格构式斜腿刚架进行了平面外整体稳定承载力参数分析，得到显著影响因素。
The influence of pavement structure parameters on additional stress in widened road is analyzed, and the sensitivity of structure parameters with orthogonal design is introduced.
分析了路面结构参数变化对拓宽道路的影响，并采用正交设计法进行了结构层参数变化的敏感性分析。
Satisfactory results are obtained by arranging cutting factors in accordance with orthogonal design and choosing the optimal combination of parameters according to optimal scheme.
如对切削加工的诸因素采用正交设计的安排，以最佳方案选择各参数的最优组合，可得满意的结果。
Aluminum coatings were sprayed onto the substrate of steel Q235 by arc spraying method and the processing parameters were optimized by orthogonal experimental design.
采用电弧喷涂方法在Q 235钢基体上喷涂铝涂层，并用正交设计的方法对工艺参数进行了优化。
In order to analysis the technological parameters influencing the property of perforating cartridge, the orthogonal design was applied to technological study.
为了分析影响射孔弹性能的工艺参数，将正交设计应用于射孔弹工艺研究中。
The best experimental parameters were Chosen through orthogonal experimental design and fuzzy analysis. The analytical results provided basis for application of ring-hole measuring fabric.
在环孔法测试织物的基础上，采用正交试验设计、模糊分析的方法优选试验参数，为环孔法测试织物提供了依据。
Within regular range of structural design parameters, the key factors of design indices are studied through orthogonal analysis of steel bridge deck surfacing with or without longitudinal clapboard.
在结构设计参数常用取值范围内，对不设纵隔板和设置纵隔板两种常用钢桥面铺装层的结构设计指标关键影响因素进行正交敏感性分析。
Orthogonal design and least squares wavelet support vector machine are integrated to optimize the technological parameters of hydro-mechanical deep drawing process using FEM.
在有限元模拟基础上，采用正交设计与最小二乘小波支持向量机对充液拉深过程参数优化进行了研究。
The orthogonal experiment design method was applied to study the relationships between solder joint process parameters and reliability of plastic ball grid array (PBGA) component.
基于正交试验设计法对塑封球栅阵列(PBGA)器件焊点工艺参数与可靠性关系进行了研究。
This paper dealt with the relationship between hot pressing parameters and mechanical properties (MOR MOE and IB) of bamboo particle board by the orthogonal design method.
利用正交试验法研究了竹材刨花板热压曲线中各因素与板材的静曲强度、弹性模量及平面抗拉强度间的关系。
Orthogonal array is used to row design parameter. On the objective function using F-test, the optimal parameters of the system and suitable tolerances are determined.
用正交表排列设计参数，用F检验确定系统的最优设计参数和恰当的容差。
Because of that both the grey spots and the performances of the rail resistance welding joints are under the synthetical influence of many parameters, the orthogonal design was used to settle tests.
由于钢轨接触焊接头灰斑与性能受众多参数综合影响，故采用正交设计安排试验。
The influence of laser transmission welding parameters for polypropylene (PP) plastics on welding quality is investigated by orthogonal design method.
利用正交实验方法，研究了聚丙烯(PP)塑料的激光透射焊接工艺参数对焊接质量的影响。
The influence of arc spraying parameters on the adhesive strength and wear-resistance of JCW-B coating was studied by orthogonal design test and extreme analysis.
采用正交设计方法和通过极差分析研究了电弧喷涂工艺参数对J CW - b涂层结合强度和耐磨性的影响。
The key parameters of labyrinth channel unit are extracted. Through orthogonal experimental design, 16 groups of clogging experiments are performed.
对迷宫流道结构抽取了关键参数，通过正交实验设计，进行了16组短周期堵塞实验。
Therefore, the main process parameters of casting have been optimized using orthogonal design, thus obtaining high-quality castings without chill layer.
本研究通过正交试验对基本工艺参数进行优化组合，得到无白口的优质铸件。
Orthogonal design and fuzzy math are applied together to obtain the initial recipe and SAS design parameters. SAS mixture design is applied to get the best recipe of mixed fruit-vegetable juice.
本研究使用正交设计和模糊数学的感官评定方法进行复合果蔬汁的配方初选，同时获得SAS设计参数，并应用SAS程序进行混合设计，确定果蔬复合汁饮料的最佳配方。
With the main structural parameters of front bumper system as variables for orthogonal experiment design, we used comprehensive analysis to optimize and match the structure of the front bumper system.
以前保险杠系统主要结构参数为变量进行正交试验设计，利用综合分析法对前保险杠结构进行优化匹配。
The optimization of maximum attack Angle is evaluated according to the given initial design parameters by using the orthogonal method.
最大攻角的优化根据给定的初始设计值采用正交法进行。
The values of parameters of the kinetic equation were estimated by the method of orthogonal design.
用正交设计法估计了动力学方程中的参数。
The values of parameters of the kinetic equation were estimated by the method of orthogonal design.
用正交设计法估计了动力学方程中的参数。
应用推荐